10Sep22 11:04:32.04,N,Compressing c:\tmp.log to c:\ar0088lz.x... 10Sep22 11:04:40.75,N,Executing script [C:\ARENDIVE.ARS] 10Sep22 11:04:40.85,N,Open files 10Sep22 11:04:40.92,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:04:41.01,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:04:41.10,N,Open files 10Sep22 11:04:41.16,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:04:41.25,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:04:41.34,N,ARS>> #arendive.ars tarcompress remove=2 Extension buffer [PSD,OTO] 10Sep22 11:04:41.73,D,Parsed ext [PSD] 10Sep22 11:04:41.80,D,Parsed ext [OTO] 10Sep22 11:04:41.88,D,total extensions = 2 10Sep22 11:04:41.96,N,Adding R0088001.PSD to c:\ar0088.tar 10Sep22 11:04:42.32,N,Adding R0088001.OTO to c:\ar0088.tar 10Sep22 11:04:42.65,N,Adding R0088007.PSD to c:\ar0088.tar 10Sep22 11:04:42.96,N,Adding R0088002.PSD to c:\ar0088.tar 10Sep22 11:04:43.29,N,Adding R0088002.OTO to c:\ar0088.tar 10Sep22 11:04:43.67,N,Adding R0088007.OTO to c:\ar0088.tar 10Sep22 11:04:44.01,N,Adding R0088003.PSD to c:\ar0088.tar 10Sep22 11:04:44.39,N,Adding R0088003.OTO to c:\ar0088.tar 10Sep22 11:04:44.83,N,Adding R0088004.PSD to c:\ar0088.tar 10Sep22 11:04:45.26,N,Adding R0088004.OTO to c:\ar0088.tar 10Sep22 11:04:45.58,N,Adding R0088008.PSD to c:\ar0088.tar 10Sep22 11:04:45.94,N,Adding R0088005.PSD to c:\ar0088.tar 10Sep22 11:04:46.30,N,Adding R0088005.OTO to c:\ar0088.tar 10Sep22 11:04:46.62,N,Adding R0088008.OTO to c:\ar0088.tar 10Sep22 11:04:46.94,N,Adding R0088009.PSD to c:\ar0088.tar 10Sep22 11:04:47.27,N,Adding R0088009.OTO to c:\ar0088.tar 10Sep22 11:04:47.59,N,Adding R0088010.PSD to c:\ar0088.tar 10Sep22 11:04:47.93,N,Adding R0088010.OTO to c:\ar0088.tar 10Sep22 11:04:48.56,N,Compressing c:\ar0088.tar to c:\ar0088dg.x... 10Sep22 11:05:15.45,N,Open files 10Sep22 11:05:15.52,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:05:15.61,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:05:15.70,N,ARS>> movefiles thisdive=1 maxbytes=010Sep22 11:05:17.60,D,Files to copy 10Sep22 11:05:17.67,D,0000 - [R0088007.DAT] 10Sep22 11:05:17.75,D,0001 - [R0088008.DAT] 10Sep22 11:05:17.83,D,0002 - [R0088009.DAT] 10Sep22 11:05:17.91,D,0003 - [R0088010.DAT] 10Sep22 11:05:17.99,D,Powering up BI... 10Sep22 11:05:22.02,N,power_up_bi = 1 10Sep22 11:05:22.10,D,Dive num = 88, file = R0088007.DAT 10Sep22 11:05:22.23,N,power_up_bi = 2 10Sep22 11:05:22.37,D,Opening d:\dive0088\R0088007.DAT for writing 10Sep22 11:05:22.49,D,Opening R0088007.DAT for reading 10Sep22 11:05:22.58,N,Writing file d:\dive0088\R0088007.DAT...done. 7688192 bytes 0.298900.2 secs 25721608.000000.2 bytes/sec 10Sep22 11:05:35.01,N,power_down_bi = 1 10Sep22 11:05:35.09,N,Removing file R0088007.DAT...done. 10Sep22 11:05:38.02,D,Dive num = 88, file = R0088008.DAT 10Sep22 11:05:38.84,N,power_up_bi = 2 10Sep22 11:05:38.97,D,Opening d:\dive0088\R0088008.DAT for writing 10Sep22 11:05:39.23,D,Opening R0088008.DAT for reading 10Sep22 11:05:39.34,N,Writing file d:\dive0088\R0088008.DAT...done. 7204864 bytes 0.609500.2 secs 11820938.000000.2 bytes/sec 10Sep22 11:05:51.07,N,power_down_bi = 1 10Sep22 11:05:51.15,N,Removing file R0088008.DAT...done. 10Sep22 11:05:53.93,D,Dive num = 88, file = R0088009.DAT 10Sep22 11:05:54.15,N,power_up_bi = 2 10Sep22 11:05:54.27,D,Opening d:\dive0088\R0088009.DAT for writing 10Sep22 11:05:54.40,D,Opening R0088009.DAT for reading 10Sep22 11:05:54.51,N,Writing file d:\dive0088\R0088009.DAT...done. 7684128 bytes 0.370075.2 secs 20763706.000000.2 bytes/sec 10Sep22 11:06:07.01,N,power_down_bi = 1 10Sep22 11:06:07.08,N,Removing file R0088009.DAT...done. 10Sep22 11:06:10.28,D,Dive num = 88, file = R0088010.DAT 10Sep22 11:06:10.51,N,power_up_bi = 2 10Sep22 11:06:10.64,D,Opening d:\dive0088\R0088010.DAT for writing 10Sep22 11:06:10.76,D,Opening R0088010.DAT for reading 10Sep22 11:06:10.87,N,Writing file d:\dive0088\R0088010.DAT...done. 7204864 bytes -0.418350.2 secs -17222098.000000.2 bytes/sec 10Sep22 11:06:22.58,N,power_down_bi = 1 10Sep22 11:06:22.66,N,Removing file R0088010.DAT...done. 10Sep22 11:06:25.92,D,Powering down BI... 10Sep22 11:06:26.35,N,power_down_bi = 0 10Sep22 11:06:26.49,N,Open files 10Sep22 11:06:26.56,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:06:26.78,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:06:26.87,N,ARS>> Open files 10Sep22 11:06:26.96,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:06:27.05,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:06:27.14,N,Finished with script [C:\ARENDIVE.ARS] 10Sep22 11:06:27.24,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:06:27.33,N,ARS>> fg reset=1 10Sep22 11:06:30.59,D,First read 10Sep22 11:06:30.66,D,AD accumulator 1: 585231512 10Sep22 11:06:30.75,D,AD overflows 1: 0 10Sep22 11:06:30.82,D,AD accumulator 2: 152246173 10Sep22 11:06:30.91,D,AD overflows 2: 0 10Sep22 11:06:30.98,D,AD sample count: 66027 10Sep22 11:06:31.06,D,Second read 10Sep22 11:06:31.13,D,AD accumulator 1: 585233359 10Sep22 11:06:31.22,D,AD overflows 1: 0 10Sep22 11:06:31.29,D,AD accumulator 2: 152248471 10Sep22 11:06:31.38,D,AD overflows 2: 0 10Sep22 11:06:31.45,D,AD sample count: 66028 10Sep22 11:06:31.53,N,avg current = 29.2043, sample_time = 47773.2 10Sep22 11:06:31.64,H,29.2043,47773.2,ARS_OK 10Sep22 11:06:31.85,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:06:31.94,N,ARS>> ARS_OK 10Sep22 11:06:33.03,N,set 10Sep22 11:06:33.13,H,DIVENUM=88 10Sep22 11:06:33.40,H,SAMPLENUM=10 10Sep22 11:06:33.53,H,OUTLEVEL=2 10Sep22 11:06:33.65,H,LOGFILE=C:\ARS.LOG 10Sep22 11:06:33.79,H,FGSLOPE=0.0033 10Sep22 11:06:33.93,H,FGYINT=-0.045 10Sep22 11:06:34.06,H,FORCETOHOST=0 10Sep22 11:06:34.19,H,WARMUP=20 10Sep22 11:06:34.31,H,UPLOADEXTS=PSD,OTO 10Sep22 11:06:34.45,H,HEAPDBG=0 10Sep22 11:06:34.58,H,ARSMODEL=3 10Sep22 11:06:34.71,H,ARSSERIAL=5 10Sep22 11:06:34.83,H,ARSCH1GAIN=200 10Sep22 11:06:34.97,H,ARSCH2GAIN=200 10Sep22 11:06:35.10,H,ARSCH1FLT=30000 10Sep22 11:06:35.24,H,ARSCH2FLT=1200 10Sep22 11:06:35.37,H,FGCLKCORR=0.940588 10Sep22 11:06:35.51,H,CHKOPENFILES=1 10Sep22 11:06:35.64,H,EPOCHTS=0 10Sep22 11:06:35.73,H,ARS_OK 10Sep22 11:06:35.79,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:06:35.88,N,ARS>> reportdisk 10Sep22 11:06:35.99,H,CDRIVE_FREE=8438185984 10Sep22 11:06:36.08,H,CDRIVE_SIZE=8453062656 10Sep22 11:06:36.18,D,Powering up BI... 10Sep22 11:06:40.17,N,power_up_bi = 1 10Sep22 11:06:40.24,H,DDRIVE_FREE=56736677888 10Sep22 11:06:40.34,H,DDRIVE_SIZE=59996930048 10Sep22 11:06:40.43,D,Powering down BI... 10Sep22 11:06:41.05,N,power_down_bi = 0 10Sep22 11:06:41.13,H,ARS_OK 10Sep22 11:06:41.19,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:06:41.28,N,ARS>> ARS_OK 10Sep22 11:07:20.19,N,clock set=rtc read=manual date=09/22/2010 time=11:07:22 sync=2 10Sep22 11:07:22.00,H,ARS_OK 10Sep22 11:07:22.06,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:07:22.15,N,ARS>> ARS_OK 10Sep22 11:07:51.65,N,luf 10Sep22 11:07:51.72,H,ar0088dg.x,ar0088lz.x,ARS_OK 10Sep22 11:07:51.88,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:07:51.97,N,ARS>> kermit send=ar0088dg.x 10Sep22 11:08:00.21,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:08:00.30,N,ARS>> kermit send=ar0088lz.x 10Sep22 11:08:10.52,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:08:10.61,N,ARS>> duf 10Sep22 11:08:10.79,H,ARS_OK 10Sep22 11:08:10.86,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:08:10.95,N,ARS>> ARS_OK 10Sep22 11:14:56.42,N,kermit 10Sep22 11:14:58.55,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:14:58.64,N,ARS>> postdownload 10Sep22 11:14:58.94,N,Decompressing C:\ARSCRIPT.TGZ to C:\ARSCRIPT.TAR... 10Sep22 11:14:59.59,N,Extracting arapogee.ars (50 bytes) ... 10Sep22 11:14:59.87,N,Extracting arbgdive.ars (288 bytes) ... 10Sep22 11:15:00.14,N,Extracting ardive.ars (913 bytes) ... 10Sep22 11:15:00.41,N,Extracting arendive.ars (66 bytes) ... 10Sep22 11:15:00.68,N,Warning - not enough padding blocks at the end 10Sep22 11:15:00.89,H,ARS_OK 10Sep22 11:15:01.03,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:15:01.18,N,ARS>> ARS_OK 10Sep22 11:16:46.66,N,set 10Sep22 11:16:46.79,H,DIVENUM=88 10Sep22 11:16:46.94,H,SAMPLENUM=10 10Sep22 11:16:47.10,H,OUTLEVEL=2 10Sep22 11:16:47.26,H,LOGFILE=C:\ARS.LOG 10Sep22 11:16:47.42,H,FGSLOPE=0.0033 10Sep22 11:16:47.59,H,FGYINT=-0.045 10Sep22 11:16:47.75,H,FORCETOHOST=0 10Sep22 11:16:47.91,H,WARMUP=20 10Sep22 11:16:48.06,H,UPLOADEXTS=PSD,OTO 10Sep22 11:16:48.23,H,HEAPDBG=0 10Sep22 11:16:48.38,H,ARSMODEL=3 10Sep22 11:16:48.54,H,ARSSERIAL=5 10Sep22 11:16:48.69,H,ARSCH1GAIN=200 10Sep22 11:16:48.85,H,ARSCH2GAIN=200 10Sep22 11:16:49.01,H,ARSCH1FLT=30000 10Sep22 11:16:49.18,H,ARSCH2FLT=1200 10Sep22 11:16:49.34,H,FGCLKCORR=0.940588 10Sep22 11:16:49.51,H,CHKOPENFILES=1 10Sep22 11:16:49.67,H,EPOCHTS=0 10Sep22 11:16:49.78,H,ARS_OK 10Sep22 11:16:49.87,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:16:49.99,N,ARS>> reportdisk 10Sep22 11:16:50.16,H,CDRIVE_FREE=8438251520 10Sep22 11:16:50.28,H,CDRIVE_SIZE=8453062656 10Sep22 11:16:50.40,D,Powering up BI... 10Sep22 11:16:54.44,N,power_up_bi = 1 10Sep22 11:16:54.64,H,DDRIVE_FREE=56736677888 10Sep22 11:16:54.77,H,DDRIVE_SIZE=59996930048 10Sep22 11:16:54.86,D,Powering down BI... 10Sep22 11:16:55.32,N,power_down_bi = 0 10Sep22 11:16:55.40,H,ARS_OK 10Sep22 11:16:55.46,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:16:55.55,N,ARS>> set DIVENUM=89 10Sep22 11:16:57.47,N,DIVENUM=89 10Sep22 11:16:57.56,H,ARS_OK 10Sep22 11:16:57.62,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:16:57.71,N,ARS>> set SAMPLENUM=0 10Sep22 11:16:57.96,N,SAMPLENUM=0 10Sep22 11:16:58.05,H,ARS_OK 10Sep22 11:16:58.11,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:16:58.20,N,ARS>> divestart 10Sep22 11:16:58.31,H,NOTIFY_APOGEE,ARS_OK 10Sep22 11:16:58.43,N,Executing script [C:\ARBGDIVE.ARS] 10Sep22 11:16:58.52,N,Open files 10Sep22 11:16:58.58,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:16:58.67,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:16:58.76,N,Open files 10Sep22 11:16:58.83,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:16:58.92,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:16:59.01,N,ARS>> #arbgdive.ars set ARSMODEL=3 10Sep22 11:16:59.28,N,ARSMODEL=3 10Sep22 11:16:59.36,H,ARS_OK 10Sep22 11:16:59.43,N,Open files 10Sep22 11:16:59.49,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:16:59.58,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:16:59.67,N,ARS>> set ARSSERIAL=5 10Sep22 11:16:59.80,N,ARSSERIAL=5 10Sep22 11:16:59.88,H,ARS_OK 10Sep22 11:16:59.95,N,Open files 10Sep22 11:17:00.01,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:17:00.10,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:00.20,N,ARS>> set ARSCH1GAIN=200 10Sep22 11:17:00.32,N,ARSCH1GAIN=200 10Sep22 11:17:00.41,H,ARS_OK 10Sep22 11:17:00.47,N,Open files 10Sep22 11:17:00.54,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:17:00.63,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:00.72,N,ARS>> set ARSCH2GAIN=200 10Sep22 11:17:00.85,N,ARSCH2GAIN=200 10Sep22 11:17:00.94,H,ARS_OK 10Sep22 11:17:01.00,N,Open files 10Sep22 11:17:01.07,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:17:01.15,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:01.25,N,ARS>> set ARSCH1FLT=30000 10Sep22 11:17:01.49,N,ARSCH1FLT=30000 10Sep22 11:17:01.58,H,ARS_OK 10Sep22 11:17:01.64,N,Open files 10Sep22 11:17:01.71,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:17:01.80,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:01.89,N,ARS>> set ARSCH2FLT=1200 10Sep22 11:17:02.01,N,ARSCH2FLT=1200 10Sep22 11:17:02.10,H,ARS_OK 10Sep22 11:17:02.17,N,Open files 10Sep22 11:17:02.23,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:17:02.32,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:02.41,N,ARS>> set FORCETOHOST=0 10Sep22 11:17:02.54,N,FORCETOHOST=0 10Sep22 11:17:02.63,H,ARS_OK 10Sep22 11:17:02.69,N,Open files 10Sep22 11:17:02.76,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:17:02.85,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:02.94,N,ARS>> set UPLOADEXTS=PSD,OTO 10Sep22 11:17:03.10,N,UPLOADEXTS=PSD,OTO 10Sep22 11:17:03.20,H,ARS_OK 10Sep22 11:17:03.26,N,Open files 10Sep22 11:17:03.33,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:17:03.42,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:03.51,N,ARS>> set WARMUP=20 10Sep22 11:17:03.63,N,WARMUP=20 10Sep22 11:17:03.82,H,ARS_OK 10Sep22 11:17:03.89,N,Open files 10Sep22 11:17:03.95,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:17:04.04,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:04.13,N,ARS>> set OUTLEVEL=2 10Sep22 11:17:04.26,N,OUTLEVEL=2 10Sep22 11:17:04.34,H,ARS_OK 10Sep22 11:17:04.41,N,Open files 10Sep22 11:17:04.47,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:17:04.56,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:04.66,N,ARS>> set LOGFILE=C:\ARS.LOG 10Sep22 11:17:04.82,N,LOGFILE=C:\ARS.LOG 10Sep22 11:17:04.91,H,ARS_OK 10Sep22 11:17:04.98,N,Open files 10Sep22 11:17:05.04,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:17:05.13,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:05.22,N,ARS>> set HEAPDBG=0 10Sep22 11:17:05.35,N,HEAPDBG=0 10Sep22 11:17:05.43,H,ARS_OK 10Sep22 11:17:05.53,N,Open files 10Sep22 11:17:05.60,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:17:05.69,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:05.78,N,ARS>> set FGSLOPE=0.0033 10Sep22 11:17:05.91,N,FGSLOPE=0.0033 10Sep22 11:17:06.00,H,ARS_OK 10Sep22 11:17:06.06,N,Open files 10Sep22 11:17:06.27,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:17:06.36,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:06.45,N,ARS>> set FGYINT=-0.045 10Sep22 11:17:06.58,N,FGYINT=-0.045 10Sep22 11:17:06.66,H,ARS_OK 10Sep22 11:17:06.73,N,Open files 10Sep22 11:17:06.79,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:17:06.88,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:06.97,N,ARS>> set FGCLKCORR=0.94058810Sep22 11:17:07.11,N,FGCLKCORR=0.940588 10Sep22 11:17:07.20,H,ARS_OK 10Sep22 11:17:07.27,N,Open files 10Sep22 11:17:07.34,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:17:07.42,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:07.52,N,ARS>> Open files 10Sep22 11:17:07.61,N, 0, 0x000435ee, main.c, 1464 10Sep22 11:17:07.70,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:07.79,N,Finished with script [C:\ARBGDIVE.ARS] 10Sep22 11:17:07.88,N,Auto state 10Sep22 11:17:07.95,N,Entering Auto State... 10Sep22 11:17:08.03,H,ARS_OK 10Sep22 11:17:08.10,N,Open files 10Sep22 11:17:08.16,N, 0, 0x000435ee, main.c, 460 10Sep22 11:17:08.25,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:17:08.34,N,ARS>> # ardive.ars # edited 201009162039L BMH # # HIGH BAND: get samples for 60 sec @ 64000Hz sample time=60 chans=1 rate=64000 time=60, rate=64000, chans=1, syncclock=1, secondheader=0 10Sep22 11:18:42.36,N,glcheck: 292648 bytes free, 36 blocks free, 89128 bytes alloc, 5902 blocks alloc, 10Sep22 11:18:42.52,D,Entering sample for 60 secs, 64000 rate and 1 chans 10Sep22 11:18:42.63,N,Storing parameters... 10Sep22 11:18:42.85,N,Waiting for 20 second warmup 10Sep22 11:19:02.94,D,Entering sample_lowlevel 10Sep22 11:19:03.07,D,Free disk space = -151683072 10Sep22 11:19:03.16,N,Using PicoZOOM 10Sep22 11:19:03.33,N,Opened c:\r0089001.dat for data collection 10Sep22 11:19:03.43,D,Writing out header to c:\r0089001.dat 10Sep22 11:19:03.69,N,SPIIIDAQ initialized... 10Sep22 11:19:03.80,D,Current speed = 16000 kHz 10Sep22 11:19:03.88,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep22 11:19:04.01,N,DO NOT power cycle CF2 during aquisition!!! 10Sep22 11:19:06.65,N,SEASCAN: Date = 3917:11:19:15 10Sep22 11:19:15.00,D,SEASCAN: got sync 1285154355 42 10Sep22 11:19:15.08,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00105 seconds 10Sep22 11:20:17.85,N,SEASCAN: Date = 3917:11:20:20 10Sep22 11:20:19.99,D,SEASCAN: got sync 1285154419 39890 10Sep22 11:20:20.08,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00274992 seconds 10Sep22 11:20:20.29,N,spdqr.contig_bytes = 1376 10Sep22 11:20:20.56,N,Aquisition complete 10Sep22 11:20:20.64,D,Stats: samples = 3840684, write errors = 0 spqd errors = 0, time = 60, measured rate = 63999.67 10Sep22 11:20:20.80,D,Drift: Before Sample = 0.00105, After Sample = -0.00274992 10Sep22 11:20:20.92,D,Flush sizes: 10Sep22 11:20:20.99,D,[0]=1 10Sep22 11:20:21.05,D,[4096]=1866 10Sep22 11:20:21.12,D,[12288]=3 10Sep22 11:20:21.18,D,Leaving sample_lowlevel normally 10Sep22 11:20:21.27,D,Leaving sample 10Sep22 11:21:54.77,N,glcheck: 292768 bytes free, 31 blocks free, 89128 bytes alloc, 5902 blocks alloc, 10Sep22 11:21:54.93,N,Open files 10Sep22 11:21:54.99,N, 0, 0x000435ee, main.c, 460 10Sep22 11:21:55.08,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:21:55.17,N,ARS>> # do psd on 1st 16 blocks (16*4096/64000 = 1.024 sec of data) psd chan=1 blocksize=4096 total_blocks=16 chan=1, infile=c:\r0089001.dat, outfile=c:\r0089001.psd 10Sep22 11:21:55.46,D,offset=0, blocksize=4096, total_blocks=16 10Sep22 11:23:28.98,N,glcheck: 292768 bytes free, 31 blocks free, 89128 bytes alloc, 5902 blocks alloc, 10Sep22 11:23:29.13,N,Starting assignments 10Sep22 11:23:29.52,N,stmp1 = inputfilename=c:\r0089001.dat 10Sep22 11:23:30.00,N,stmp1 = outputfilename=c:\r0089001.psd 10Sep22 11:23:30.58,N,stmp1 = channel=1 10Sep22 11:23:31.05,N,stmp1 = blocksize=4096 10Sep22 11:23:31.52,N,stmp1 = offset=0 10Sep22 11:23:31.97,N,stmp1 = total_blocks=16 10Sep22 11:23:32.05,N,ParameterObject dump: 10Sep22 11:23:32.12,N, 6 pairs found: 10Sep22 11:23:32.20,N, key: ->inputfilename<- value: ->c:\r0089001.dat<- 10Sep22 11:23:32.31,N, key: ->outputfilename<- value: ->c:\r0089001.psd<- 10Sep22 11:23:32.42,N, key: ->channel<- value: ->1<- 10Sep22 11:23:32.51,N, key: ->blocksize<- value: ->4096<- 10Sep22 11:23:32.60,N, key: ->offset<- value: ->0<- 10Sep22 11:23:32.69,N, key: ->total_blocks<- value: ->16<- 10Sep22 11:23:32.84,N,estimate_psd(): input file c:\r0089001.dat exists estimate_psd(): input file c:\r0089001.dat can be opened 10Sep22 11:23:33.06,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep22 11:23:51.51,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep22 11:24:05.31,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep22 11:24:05.51,N,close(): ASGFile not valid 10Sep22 11:24:05.61,N,retval = 0 10Sep22 11:25:39.63,N,glcheck: 292172 bytes free, 46 blocks free, 89220 bytes alloc, 5908 blocks alloc, 10Sep22 11:25:39.79,N,Open files 10Sep22 11:25:39.85,N, 0, 0x000435ee, main.c, 460 10Sep22 11:25:39.94,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:25:40.03,N,ARS>> # do one-third octave on same data (go up to 30kHz) # fc = 10^(45/10) = 31.623kHz (28.184kHz to 35.481kHz) # NOTE: last band may not be filled since 32kHz is our max freq oto bandmax=45 bandmax=45, infile=c:\r0089001.psd, outfile=c:\r0089001.oto 10Sep22 11:27:14.20,N,glcheck: 292172 bytes free, 46 blocks free, 89220 bytes alloc, 5908 blocks alloc, 10Sep22 11:27:15.43,N,ParameterObject dump: 10Sep22 11:27:15.64,N, 3 pairs found: 10Sep22 11:27:15.71,N, key: ->inputfilename<- value: ->c:\r0089001.psd<- 10Sep22 11:27:15.82,N, key: ->outputfilename<- value: ->c:\r0089001.oto<- 10Sep22 11:27:15.94,N, key: ->bandmax<- value: ->45<- 10Sep22 11:27:16.03,N,starting the OTO synthesizer: .... 10Sep22 11:27:25.18,N,retval = 0 10Sep22 11:28:59.17,N,glcheck: 292084 bytes free, 44 blocks free, 89284 bytes alloc, 5911 blocks alloc, 10Sep22 11:28:59.32,N,Open files 10Sep22 11:28:59.39,N, 0, 0x000435ee, main.c, 460 10Sep22 11:28:59.48,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:28:59.57,N,ARS>> # sleep 60 sec = 1 minute sleep time=60 type=0 time = 60, type = 0 10Sep22 11:28:59.75,H,ARS_OK 10Sep22 11:28:59.82,D,Entering LPStopUntil secs = 1285154939, sleeping until 1285154999 with 4 big sleeps... 10Sep22 11:28:59.98,D,Comm ports closed prior to sleeping 10Sep22 11:29:00.08,D,Console port cleared and RTS asserted low 10Sep22 11:29:00.18,D,pin 23 set high 10Sep22 11:29:00.25,D,pin 24 set low 10Sep22 11:29:00.32,D,pin 25 read 10Sep22 11:29:00.39,D,pin 26 mirrored (0) 10Sep22 11:29:00.46,D,pin 27 set low 10Sep22 11:29:00.53,D,pin 28 mirrored (0) 10Sep22 11:29:00.61,D,pin 29 set high 10Sep22 11:29:00.68,D,pin 31 set high 10Sep22 11:29:00.89,D,pin 32 mirrored (0) 10Sep22 11:29:00.96,D,pin 33 mirrored (0) 10Sep22 11:29:01.04,D,pin 34 mirrored (0) 10Sep22 11:29:01.12,D,pin 35 mirrored (0) 10Sep22 11:29:01.19,D,pin 36 mirrored (-1) 10Sep22 11:29:01.27,D,pin 37 mirrored (0) 10Sep22 11:29:01.35,D,pins are set for low power 10Sep22 11:29:01.43,D,interrupt handlers installed 10Sep22 11:29:01.52,D,serial drivers, CF and TPU states set 10Sep22 11:29:01.61,D,dog stroked 10Sep22 11:29:01.72,D,low speed set 10Sep22 11:29:02.29,D,PIT set 10Sep22 11:29:15.40,D,awake from big sleep, dog stroked 10Sep22 11:29:28.45,D,awake from big sleep, dog stroked 10Sep22 11:29:41.51,D,awake from big sleep, dog stroked 10Sep22 11:29:54.56,D,awake from big sleep, dog stroked 10Sep22 11:29:55.11,D,Entering LPStopUntil secs = 1285154995, sleeping until 1285154999 for remainder sleep... 10Sep22 11:29:59.74,D,done with sleeps, dog stroked 10Sep22 11:30:00.29,D,handlers and peripheral states restored 10Sep22 11:30:00.41,D,...exiting lpStopUntil normally 10Sep22 11:30:00.50,N,Open files 10Sep22 11:30:00.56,N, 0, 0x000435ee, main.c, 460 10Sep22 11:30:00.65,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:30:00.74,N,ARS>> # LOW BAND: get samples for 900 sec @ 4000 Hz sample time=900 chans=2 rate=4000 time=900, rate=4000, chans=2, syncclock=1, secondheader=0 10Sep22 11:31:34.77,N,glcheck: 292084 bytes free, 44 blocks free, 89284 bytes alloc, 5911 blocks alloc, 10Sep22 11:31:34.92,D,Entering sample for 900 secs, 4000 rate and 2 chans 10Sep22 11:31:35.15,N,Storing parameters... 10Sep22 11:31:35.37,N,Waiting for 20 second warmup 10Sep22 11:31:55.46,D,Entering sample_lowlevel 10Sep22 11:31:55.59,D,Free disk space = -159449088 10Sep22 11:31:55.68,N,Not using PicoZOOM 10Sep22 11:31:55.81,N,Opened c:\r0089002.dat for data collection 10Sep22 11:31:55.91,D,Writing out header to c:\r0089002.dat 10Sep22 11:31:56.21,N,SPIIIDAQ initialized... 10Sep22 11:31:56.29,D,Current speed = 16000 kHz 10Sep22 11:31:56.37,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep22 11:31:56.51,N,DO NOT power cycle CF2 during aquisition!!! 10Sep22 11:31:59.12,N,SEASCAN: Date = 3917:11:32:1 10Sep22 11:32:01.00,D,SEASCAN: got sync 1285155121 41 10Sep22 11:32:01.09,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00102496 seconds 10Sep22 11:47:05.13,N,SEASCAN: Date = 3917:11:47:7 10Sep22 11:47:06.99,D,SEASCAN: got sync 1285156026 39987 10Sep22 11:47:07.09,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.000324965 seconds 10Sep22 11:47:07.30,N,spdqr.contig_bytes = 3344 10Sep22 11:47:07.53,N,Aquisition complete 10Sep22 11:47:07.61,D,Stats: samples = 3600004, write errors = 0 spqd errors = 0, time = 9e+02, measured rate = 3999.99 10Sep22 11:47:07.78,D,Drift: Before Sample = 0.00102496, After Sample = -0.000324965 10Sep22 11:47:07.90,D,Flush sizes: 10Sep22 11:47:07.97,D,[0]=1 10Sep22 11:47:08.03,D,[4096]=1757 10Sep22 11:47:08.24,D,Leaving sample_lowlevel normally 10Sep22 11:47:08.33,D,Leaving sample 10Sep22 11:48:41.98,N,glcheck: 292372 bytes free, 32 blocks free, 89284 bytes alloc, 5911 blocks alloc, 10Sep22 11:48:42.14,N,Open files 10Sep22 11:48:42.20,N, 0, 0x000435ee, main.c, 460 10Sep22 11:48:42.29,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:48:42.38,N,ARS>> # do PSD on 16 blocks (16*4096/4000 = 16.384 sec) psd chan=2 blocksize=4096 total_blocks=16 chan=2, infile=c:\r0089002.dat, outfile=c:\r0089002.psd 10Sep22 11:48:42.66,D,offset=0, blocksize=4096, total_blocks=16 10Sep22 11:50:16.33,N,glcheck: 292372 bytes free, 32 blocks free, 89284 bytes alloc, 5911 blocks alloc, 10Sep22 11:50:16.49,N,Starting assignments 10Sep22 11:50:16.88,N,stmp1 = inputfilename=c:\r0089002.dat 10Sep22 11:50:17.35,N,stmp1 = outputfilename=c:\r0089002.psd 10Sep22 11:50:17.82,N,stmp1 = channel=2 10Sep22 11:50:18.29,N,stmp1 = blocksize=4096 10Sep22 11:50:18.74,N,stmp1 = offset=0 10Sep22 11:50:19.19,N,stmp1 = total_blocks=16 10Sep22 11:50:19.27,N,ParameterObject dump: 10Sep22 11:50:19.35,N, 6 pairs found: 10Sep22 11:50:19.42,N, key: ->inputfilename<- value: ->c:\r0089002.dat<- 10Sep22 11:50:19.53,N, key: ->outputfilename<- value: ->c:\r0089002.psd<- 10Sep22 11:50:19.64,N, key: ->channel<- value: ->2<- 10Sep22 11:50:19.73,N, key: ->blocksize<- value: ->4096<- 10Sep22 11:50:19.83,N, key: ->offset<- value: ->0<- 10Sep22 11:50:19.92,N, key: ->total_blocks<- value: ->16<- 10Sep22 11:50:20.07,N,estimate_psd(): input file c:\r0089002.dat exists estimate_psd(): input file c:\r0089002.dat can be opened 10Sep22 11:50:20.30,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep22 11:50:38.88,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep22 11:50:52.71,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep22 11:50:52.91,N,close(): ASGFile not valid 10Sep22 11:50:53.01,N,retval = 0 10Sep22 11:52:27.19,N,glcheck: 291752 bytes free, 48 blocks free, 89376 bytes alloc, 5917 blocks alloc, 10Sep22 11:52:27.35,N,Open files 10Sep22 11:52:27.42,N, 0, 0x000435ee, main.c, 460 10Sep22 11:52:27.51,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:52:27.60,N,ARS>> # do one third octave on same data (go up to 2500Hz) # fc = 10^(34/10) = 2.512 kHz (2.239kHz to 2.818kHz) # NOTE: last band may not be filled since 2.5kHz is our max freq oto bandmax=34 bandmax=34, infile=c:\r0089002.psd, outfile=c:\r0089002.oto 10Sep22 11:54:01.95,N,glcheck: 291752 bytes free, 48 blocks free, 89376 bytes alloc, 5917 blocks alloc, 10Sep22 11:54:03.17,N,ParameterObject dump: 10Sep22 11:54:03.25,N, 3 pairs found: 10Sep22 11:54:03.33,N, key: ->inputfilename<- value: ->c:\r0089002.psd<- 10Sep22 11:54:03.44,N, key: ->outputfilename<- value: ->c:\r0089002.oto<- 10Sep22 11:54:03.55,N, key: ->bandmax<- value: ->34<- 10Sep22 11:54:03.64,N,starting the OTO synthesizer: .... 10Sep22 11:54:12.81,N,retval = 0 10Sep22 11:55:46.97,N,glcheck: 291664 bytes free, 46 blocks free, 89440 bytes alloc, 5920 blocks alloc, 10Sep22 11:55:47.13,N,Open files 10Sep22 11:55:47.20,N, 0, 0x000435ee, main.c, 460 10Sep22 11:55:47.29,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:55:47.38,N,ARS>> # sleep 60 sec = 1 minutes sleep time=60 type=0 time = 60, type = 0 10Sep22 11:55:47.70,H,ARS_OK 10Sep22 11:55:47.77,D,Entering LPStopUntil secs = 1285156547, sleeping until 1285156607 with 4 big sleeps... 10Sep22 11:55:47.93,D,Comm ports closed prior to sleeping 10Sep22 11:55:48.03,D,Console port cleared and RTS asserted low 10Sep22 11:55:48.12,D,pin 23 set high 10Sep22 11:55:48.19,D,pin 24 set low 10Sep22 11:55:48.27,D,pin 25 read 10Sep22 11:55:48.33,D,pin 26 mirrored (0) 10Sep22 11:55:48.41,D,pin 27 set low 10Sep22 11:55:48.48,D,pin 28 mirrored (0) 10Sep22 11:55:48.56,D,pin 29 set high 10Sep22 11:55:48.63,D,pin 31 set high 10Sep22 11:55:48.70,D,pin 32 mirrored (0) 10Sep22 11:55:48.77,D,pin 33 mirrored (0) 10Sep22 11:55:48.85,D,pin 34 mirrored (0) 10Sep22 11:55:48.93,D,pin 35 mirrored (0) 10Sep22 11:55:49.00,D,pin 36 mirrored (-1) 10Sep22 11:55:49.08,D,pin 37 mirrored (0) 10Sep22 11:55:49.16,D,pins are set for low power 10Sep22 11:55:49.24,D,interrupt handlers installed 10Sep22 11:55:49.33,D,serial drivers, CF and TPU states set 10Sep22 11:55:49.42,D,dog stroked 10Sep22 11:55:49.53,D,low speed set 10Sep22 11:55:50.06,D,PIT set 10Sep22 11:56:03.18,D,awake from big sleep, dog stroked 10Sep22 11:56:16.23,D,awake from big sleep, dog stroked 10Sep22 11:56:29.29,D,awake from big sleep, dog stroked 10Sep22 11:56:42.34,D,awake from big sleep, dog stroked 10Sep22 11:56:42.89,D,Entering LPStopUntil secs = 1285156602, sleeping until 1285156607 for remainder sleep... 10Sep22 11:56:48.54,D,done with sleeps, dog stroked 10Sep22 11:56:49.12,D,handlers and peripheral states restored 10Sep22 11:56:49.23,D,...exiting lpStopUntil normally 10Sep22 11:56:49.32,N,Open files 10Sep22 11:56:49.39,N, 0, 0x000435ee, main.c, 460 10Sep22 11:56:49.48,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:56:49.57,N,ARS>> # repeat this cycle loopLooping to top of file 10Sep22 11:56:49.73,N,Open files 10Sep22 11:56:49.80,N, 0, 0x000435ee, main.c, 460 10Sep22 11:56:49.89,N,pin = 116, pin err = 0, comm = 81 10Sep22 11:56:49.98,N,ARS>> # ardive.ars # edited 201009162039L BMH # # HIGH BAND: get samples for 60 sec @ 64000Hz sample time=60 chans=1 rate=64000 time=60, rate=64000, chans=1, syncclock=1, secondheader=0 10Sep22 11:58:24.29,N,glcheck: 291664 bytes free, 46 blocks free, 89440 bytes alloc, 5920 blocks alloc, 10Sep22 11:58:24.44,D,Entering sample for 60 secs, 64000 rate and 1 chans 10Sep22 11:58:24.55,N,Storing parameters... 10Sep22 11:58:24.78,N,Waiting for 20 second warmup 10Sep22 11:58:44.87,D,Entering sample_lowlevel 10Sep22 11:58:45.00,D,Free disk space = -166723584 10Sep22 11:58:45.22,N,Using PicoZOOM 10Sep22 11:58:45.40,N,Opened c:\r0089003.dat for data collection 10Sep22 11:58:45.50,D,Writing out header to c:\r0089003.dat 10Sep22 11:58:45.73,N,SPIIIDAQ initialized... 10Sep22 11:58:45.83,D,Current speed = 16000 kHz 10Sep22 11:58:45.90,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep22 11:58:46.04,N,DO NOT power cycle CF2 during aquisition!!! 10Sep22 11:58:49.73,N,SEASCAN: Date = 3917:11:58:52 10Sep22 11:58:52.00,D,SEASCAN: got sync 1285156732 41 10Sep22 11:58:52.08,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00102496 seconds 10Sep22 11:59:55.18,N,SEASCAN: Date = 3917:11:59:57 10Sep22 11:59:56.99,D,SEASCAN: got sync 1285156796 39893 10Sep22 11:59:57.08,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00267506 seconds 10Sep22 11:59:57.29,N,spdqr.contig_bytes = 4112 10Sep22 11:59:57.52,N,Aquisition complete 10Sep22 11:59:57.60,D,Stats: samples = 3840004, write errors = 0 spqd errors = 0, time = 60, measured rate = 63999.69 10Sep22 11:59:57.77,D,Drift: Before Sample = 0.00102496, After Sample = -0.00267506 10Sep22 11:59:57.89,D,Flush sizes: 10Sep22 11:59:57.96,D,[4096]=1869 10Sep22 11:59:58.03,D,[12288]=2 10Sep22 11:59:58.09,D,Leaving sample_lowlevel normally 10Sep22 11:59:58.18,D,Leaving sample 10Sep22 12:01:31.79,N,glcheck: 292024 bytes free, 31 blocks free, 89440 bytes alloc, 5920 blocks alloc, 10Sep22 12:01:31.95,N,Open files 10Sep22 12:01:32.01,N, 0, 0x000435ee, main.c, 460 10Sep22 12:01:32.10,N,pin = 116, pin err = 0, comm = 81 10Sep22 12:01:32.19,N,ARS>> # do psd on 1st 16 blocks (16*4096/64000 = 1.024 sec of data) psd chan=1 blocksize=4096 total_blocks=16 chan=1, infile=c:\r0089003.dat, outfile=c:\r0089003.psd 10Sep22 12:01:32.49,D,offset=0, blocksize=4096, total_blocks=16 10Sep22 12:03:06.24,N,glcheck: 292024 bytes free, 31 blocks free, 89440 bytes alloc, 5920 blocks alloc, 10Sep22 12:03:06.40,N,Starting assignments 10Sep22 12:03:06.79,N,stmp1 = inputfilename=c:\r0089003.dat 10Sep22 12:03:07.27,N,stmp1 = outputfilename=c:\r0089003.psd 10Sep22 12:03:07.74,N,stmp1 = channel=1 10Sep22 12:03:08.21,N,stmp1 = blocksize=4096 10Sep22 12:03:08.66,N,stmp1 = offset=0 10Sep22 12:03:09.11,N,stmp1 = total_blocks=16 10Sep22 12:03:09.19,N,ParameterObject dump: 10Sep22 12:03:09.26,N, 6 pairs found: 10Sep22 12:03:09.34,N, key: ->inputfilename<- value: ->c:\r0089003.dat<- 10Sep22 12:03:09.45,N, key: ->outputfilename<- value: ->c:\r0089003.psd<- 10Sep22 12:03:09.56,N, key: ->channel<- value: ->1<- 10Sep22 12:03:09.65,N, key: ->blocksize<- value: ->4096<- 10Sep22 12:03:09.74,N, key: ->offset<- value: ->0<- 10Sep22 12:03:09.83,N, key: ->total_blocks<- value: ->16<- 10Sep22 12:03:09.99,N,estimate_psd(): input file c:\r0089003.dat exists estimate_psd(): input file c:\r0089003.dat can be opened 10Sep22 12:03:10.25,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep22 12:03:28.81,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep22 12:03:42.63,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep22 12:03:42.84,N,close(): ASGFile not valid 10Sep22 12:03:42.94,N,retval = 0 10Sep22 12:05:17.08,N,glcheck: 291428 bytes free, 46 blocks free, 89532 bytes alloc, 5926 blocks alloc, 10Sep22 12:05:17.24,N,Open files 10Sep22 12:05:17.31,N, 0, 0x000435ee, main.c, 460 10Sep22 12:05:17.41,N,pin = 116, pin err = 0, comm = 81 10Sep22 12:05:17.50,N,ARS>> # do one-third octave on same data (go up to 30kHz) # fc = 10^(45/10) = 31.623kHz (28.184kHz to 35.481kHz) # NOTE: last band may not be filled since 32kHz is our max freq oto bandmax=45 bandmax=45, infile=c:\r0089003.psd, outfile=c:\r0089003.oto 10Sep22 12:06:51.97,N,glcheck: 291428 bytes free, 46 blocks free, 89532 bytes alloc, 5926 blocks alloc, 10Sep22 12:06:53.20,N,ParameterObject dump: 10Sep22 12:06:53.28,N, 3 pairs found: 10Sep22 12:06:53.36,N, key: ->inputfilename<- value: ->c:\r0089003.psd<- 10Sep22 12:06:53.47,N, key: ->outputfilename<- value: ->c:\r0089003.oto<- 10Sep22 12:06:53.59,N, key: ->bandmax<- value: ->45<- 10Sep22 12:06:53.68,N,starting the OTO synthesizer: .... 10Sep22 12:07:02.88,N,retval = 0 10Sep22 12:08:36.95,N,glcheck: 291340 bytes free, 44 blocks free, 89596 bytes alloc, 5929 blocks alloc, 10Sep22 12:08:37.11,N,Open files 10Sep22 12:08:37.18,N, 0, 0x000435ee, main.c, 460 10Sep22 12:08:37.28,N,pin = 116, pin err = 0, comm = 81 10Sep22 12:08:37.38,N,ARS>> # sleep 60 sec = 1 minute sleep time=60 type=0 time = 60, type = 0 10Sep22 12:08:37.59,H,ARS_OK 10Sep22 12:08:37.66,D,Entering LPStopUntil secs = 1285157317, sleeping until 1285157377 with 4 big sleeps... 10Sep22 12:08:37.82,D,Comm ports closed prior to sleeping 10Sep22 12:08:37.92,D,Console port cleared and RTS asserted low 10Sep22 12:08:38.03,D,pin 23 set high 10Sep22 12:08:38.10,D,pin 24 set low 10Sep22 12:08:38.18,D,pin 25 read 10Sep22 12:08:38.25,D,pin 26 mirrored (0) 10Sep22 12:08:38.33,D,pin 27 set low 10Sep22 12:08:38.55,D,pin 28 mirrored (0) 10Sep22 12:08:38.63,D,pin 29 set high 10Sep22 12:08:38.70,D,pin 31 set high 10Sep22 12:08:38.78,D,pin 32 mirrored (0) 10Sep22 12:08:38.86,D,pin 33 mirrored (0) 10Sep22 12:08:38.93,D,pin 34 mirrored (0) 10Sep22 12:08:39.01,D,pin 35 mirrored (0) 10Sep22 12:08:39.09,D,pin 36 mirrored (-1) 10Sep22 12:08:39.17,D,pin 37 mirrored (0) 10Sep22 12:08:39.25,D,pins are set for low power 10Sep22 12:08:39.34,D,interrupt handlers installed 10Sep22 12:08:39.43,D,serial drivers, CF and TPU states set 10Sep22 12:08:39.53,D,dog stroked 10Sep22 12:08:39.64,D,low speed set 10Sep22 12:08:40.20,D,PIT set 10Sep22 12:08:53.32,D,awake from big sleep, dog stroked 10Sep22 12:09:06.38,D,awake from big sleep, dog stroked 10Sep22 12:09:19.44,D,awake from big sleep, dog stroked 10Sep22 12:09:32.49,D,awake from big sleep, dog stroked 10Sep22 12:09:33.06,D,Entering LPStopUntil secs = 1285157373, sleeping until 1285157377 for remainder sleep... 10Sep22 12:09:37.71,D,done with sleeps, dog stroked 10Sep22 12:09:38.29,D,handlers and peripheral states restored 10Sep22 12:09:38.41,D,...exiting lpStopUntil normally 10Sep22 12:09:38.50,N,Open files 10Sep22 12:09:38.57,N, 0, 0x000435ee, main.c, 460 10Sep22 12:09:38.67,N,pin = 116, pin err = 0, comm = 81 10Sep22 12:09:38.76,N,ARS>> # LOW BAND: get samples for 900 sec @ 4000 Hz sample time=900 chans=2 rate=4000 time=900, rate=4000, chans=2, syncclock=1, secondheader=0 10Sep22 12:11:13.19,N,glcheck: 291340 bytes free, 44 blocks free, 89596 bytes alloc, 5929 blocks alloc, 10Sep22 12:11:13.35,D,Entering sample for 900 secs, 4000 rate and 2 chans 10Sep22 12:11:13.46,N,Storing parameters... 10Sep22 12:11:13.69,N,Waiting for 20 second warmup 10Sep22 12:11:33.79,D,Entering sample_lowlevel 10Sep22 12:11:33.92,D,Free disk space = -174522368 10Sep22 12:11:34.01,N,Not using PicoZOOM 10Sep22 12:11:34.15,N,Opened c:\r0089004.dat for data collection 10Sep22 12:11:34.26,D,Writing out header to c:\r0089004.dat 10Sep22 12:11:34.53,N,SPIIIDAQ initialized... 10Sep22 12:11:34.62,D,Current speed = 16000 kHz 10Sep22 12:11:34.70,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep22 12:11:34.84,N,DO NOT power cycle CF2 during aquisition!!! 10Sep22 12:11:38.13,N,SEASCAN: Date = 3917:12:11:40 10Sep22 12:11:40.00,D,SEASCAN: got sync 1285157500 41 10Sep22 12:11:40.09,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00102496 seconds 10Sep22 12:26:44.13,N,SEASCAN: Date = 3917:12:26:46 10Sep22 12:26:45.99,D,SEASCAN: got sync 1285158405 39978 10Sep22 12:26:46.09,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.000550032 seconds 10Sep22 12:26:46.31,N,spdqr.contig_bytes = 3344 10Sep22 12:26:46.64,N,Aquisition complete 10Sep22 12:26:46.72,D,Stats: samples = 3600004, write errors = 0 spqd errors = 0, time = 9e+02, measured rate = 3999.99 10Sep22 12:26:46.89,D,Drift: Before Sample = 0.00102496, After Sample = -0.000550032 10Sep22 12:26:47.02,D,Flush sizes: 10Sep22 12:26:47.09,D,[0]=1 10Sep22 12:26:47.16,D,[4096]=1757 10Sep22 12:26:47.23,D,Leaving sample_lowlevel normally 10Sep22 12:26:47.32,D,Leaving sample 10Sep22 12:28:21.25,N,glcheck: 291628 bytes free, 32 blocks free, 89596 bytes alloc, 5929 blocks alloc, 10Sep22 12:28:21.41,N,Open files 10Sep22 12:28:21.48,N, 0, 0x000435ee, main.c, 460 10Sep22 12:28:21.57,N,pin = 116, pin err = 0, comm = 81 10Sep22 12:28:21.66,N,ARS>> # do PSD on 16 blocks (16*4096/4000 = 16.384 sec) psd chan=2 blocksize=4096 total_blocks=16 chan=2, infile=c:\r0089004.dat, outfile=c:\r0089004.psd 10Sep22 12:28:21.96,D,offset=0, blocksize=4096, total_blocks=16 10Sep22 12:29:55.93,N,glcheck: 291628 bytes free, 32 blocks free, 89596 bytes alloc, 5929 blocks alloc, 10Sep22 12:29:56.09,N,Starting assignments 10Sep22 12:29:56.48,N,stmp1 = inputfilename=c:\r0089004.dat 10Sep22 12:29:56.97,N,stmp1 = outputfilename=c:\r0089004.psd 10Sep22 12:29:57.44,N,stmp1 = channel=2 10Sep22 12:29:57.91,N,stmp1 = blocksize=4096 10Sep22 12:29:58.37,N,stmp1 = offset=0 10Sep22 12:29:58.83,N,stmp1 = total_blocks=16 10Sep22 12:29:58.91,N,ParameterObject dump: 10Sep22 12:29:58.99,N, 6 pairs found: 10Sep22 12:29:59.07,N, key: ->inputfilename<- value: ->c:\r0089004.dat<- 10Sep22 12:29:59.29,N, key: ->outputfilename<- value: ->c:\r0089004.psd<- 10Sep22 12:29:59.41,N, key: ->channel<- value: ->2<- 10Sep22 12:29:59.50,N, key: ->blocksize<- value: ->4096<- 10Sep22 12:29:59.60,N, key: ->offset<- value: ->0<- 10Sep22 12:29:59.69,N, key: ->total_blocks<- value: ->16<- 10Sep22 12:29:59.86,N,estimate_psd(): input file c:\r0089004.dat exists estimate_psd(): input file c:\r0089004.dat can be opened 10Sep22 12:30:00.12,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep22 12:30:18.60,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep22 12:30:32.45,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep22 12:30:32.66,N,close(): ASGFile not valid 10Sep22 12:30:32.76,N,retval = 0 10Sep22 12:32:07.24,N,glcheck: 291008 bytes free, 48 blocks free, 89688 bytes alloc, 5935 blocks alloc, 10Sep22 12:32:07.40,N,Open files 10Sep22 12:32:07.47,N, 0, 0x000435ee, main.c, 460 10Sep22 12:32:07.56,N,pin = 116, pin err = 0, comm = 81 10Sep22 12:32:07.65,N,ARS>> # do one third octave on same data (go up to 2500Hz) # fc = 10^(34/10) = 2.512 kHz (2.239kHz to 2.818kHz) # NOTE: last band may not be filled since 2.5kHz is our max freq oto bandmax=34 bandmax=34, infile=c:\r0089004.psd, outfile=c:\r0089004.oto 10Sep22 12:33:42.31,N,glcheck: 291008 bytes free, 48 blocks free, 89688 bytes alloc, 5935 blocks alloc, 10Sep22 12:33:43.55,N,ParameterObject dump: 10Sep22 12:33:43.63,N, 3 pairs found: 10Sep22 12:33:43.71,N, key: ->inputfilename<- value: ->c:\r0089004.psd<- 10Sep22 12:33:43.82,N, key: ->outputfilename<- value: ->c:\r0089004.oto<- 10Sep22 12:33:43.94,N, key: ->bandmax<- value: ->34<- 10Sep22 12:33:44.03,N,starting the OTO synthesizer: .... 10Sep22 12:33:53.36,N,retval = 0 10Sep22 12:35:27.81,N,glcheck: 290920 bytes free, 46 blocks free, 89752 bytes alloc, 5938 blocks alloc, 10Sep22 12:35:27.97,N,Open files 10Sep22 12:35:28.04,N, 0, 0x000435ee, main.c, 460 10Sep22 12:35:28.13,N,pin = 116, pin err = 0, comm = 81 10Sep22 12:35:28.22,N,ARS>> # sleep 60 sec = 1 minutes sleep time=60 type=0 time = 60, type = 0 10Sep22 12:35:28.43,H,ARS_OK 10Sep22 12:35:28.49,D,Entering LPStopUntil secs = 1285158928, sleeping until 1285158988 with 4 big sleeps... 10Sep22 12:35:28.66,D,Comm ports closed prior to sleeping 10Sep22 12:35:28.76,D,Console port cleared and RTS asserted low 10Sep22 12:35:28.86,D,pin 23 set high 10Sep22 12:35:28.94,D,pin 24 set low 10Sep22 12:35:29.01,D,pin 25 read 10Sep22 12:35:29.08,D,pin 26 mirrored (0) 10Sep22 12:35:29.16,D,pin 27 set low 10Sep22 12:35:29.23,D,pin 28 mirrored (0) 10Sep22 12:35:29.31,D,pin 29 set high 10Sep22 12:35:29.39,D,pin 31 set high 10Sep22 12:35:29.46,D,pin 32 mirrored (0) 10Sep22 12:35:29.55,D,pin 33 mirrored (0) 10Sep22 12:35:29.62,D,pin 34 mirrored (0) 10Sep22 12:35:29.70,D,pin 35 mirrored (0) 10Sep22 12:35:29.78,D,pin 36 mirrored (-1) 10Sep22 12:35:29.86,D,pin 37 mirrored (0) 10Sep22 12:35:30.08,D,pins are set for low power 10Sep22 12:35:30.17,D,interrupt handlers installed 10Sep22 12:35:30.26,D,serial drivers, CF and TPU states set 10Sep22 12:35:30.36,D,dog stroked 10Sep22 12:35:30.47,D,low speed set 10Sep22 12:35:31.05,D,PIT set 10Sep22 12:35:44.13,D,awake from big sleep, dog stroked 10Sep22 12:35:57.18,D,awake from big sleep, dog stroked 10Sep22 12:36:10.24,D,awake from big sleep, dog stroked 10Sep22 12:36:23.29,D,awake from big sleep, dog stroked 10Sep22 12:36:23.86,D,Entering LPStopUntil secs = 1285158983, sleeping until 1285158988 for remainder sleep... 10Sep22 12:36:29.54,D,done with sleeps, dog stroked 10Sep22 12:36:30.12,D,handlers and peripheral states restored 10Sep22 12:36:30.24,D,...exiting lpStopUntil normally 10Sep22 12:36:30.33,N,Open files 10Sep22 12:36:30.40,N, 0, 0x000435ee, main.c, 460 10Sep22 12:36:30.49,N,pin = 116, pin err = 0, comm = 81 10Sep22 12:36:30.58,N,ARS>> # repeat this cycle loopLooping to top of file 10Sep22 12:36:30.76,N,Open files 10Sep22 12:36:30.83,N, 0, 0x000435ee, main.c, 460 10Sep22 12:36:30.92,N,pin = 116, pin err = 0, comm = 81 10Sep22 12:36:31.02,N,ARS>> # ardive.ars # edited 201009162039L BMH # # HIGH BAND: get samples for 60 sec @ 64000Hz sample time=60 chans=1 rate=64000 time=60, rate=64000, chans=1, syncclock=1, secondheader=0 10Sep22 12:38:05.75,N,glcheck: 290920 bytes free, 46 blocks free, 89752 bytes alloc, 5938 blocks alloc, 10Sep22 12:38:05.91,D,Entering sample for 60 secs, 64000 rate and 1 chans 10Sep22 12:38:06.03,N,Storing parameters... 10Sep22 12:38:06.26,N,Waiting for 20 second warmup 10Sep22 12:38:26.35,D,Entering sample_lowlevel 10Sep22 12:38:26.48,D,Free disk space = -181796864 10Sep22 12:38:26.57,N,Using PicoZOOM 10Sep22 12:38:26.75,N,Opened c:\r0089005.dat for data collection 10Sep22 12:38:26.86,D,Writing out header to c:\r0089005.dat 10Sep22 12:38:27.08,N,SPIIIDAQ initialized... 10Sep22 12:38:27.20,D,Current speed = 16000 kHz 10Sep22 12:38:27.28,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep22 12:38:27.41,N,DO NOT power cycle CF2 during aquisition!!! 10Sep22 12:38:30.41,N,SEASCAN: Date = 3917:12:38:33 10Sep22 12:38:33.00,D,SEASCAN: got sync 1285159113 42 10Sep22 12:38:33.08,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00105 seconds 10Sep22 12:39:35.86,N,SEASCAN: Date = 3917:12:39:38 10Sep22 12:39:37.99,D,SEASCAN: got sync 1285159177 39893 10Sep22 12:39:38.08,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00267506 seconds 10Sep22 12:39:38.29,N,spdqr.contig_bytes = 4128 10Sep22 12:39:38.53,N,Aquisition complete 10Sep22 12:39:38.61,D,Stats: samples = 3840012, write errors = 0 spqd errors = 0, time = 60, measured rate = 63999.72 10Sep22 12:39:38.78,D,Drift: Before Sample = 0.00105, After Sample = -0.00267506 10Sep22 12:39:38.90,D,Flush sizes: 10Sep22 12:39:38.97,D,[4096]=1869 10Sep22 12:39:39.05,D,[12288]=2 10Sep22 12:39:39.12,D,Leaving sample_lowlevel normally 10Sep22 12:39:39.21,D,Leaving sample 10Sep22 12:41:13.25,N,glcheck: 291304 bytes free, 30 blocks free, 89752 bytes alloc, 5938 blocks alloc, 10Sep22 12:41:13.41,N,Open files 10Sep22 12:41:13.48,N, 0, 0x000435ee, main.c, 460 10Sep22 12:41:13.57,N,pin = 116, pin err = 0, comm = 81 10Sep22 12:41:13.67,N,ARS>> # do psd on 1st 16 blocks (16*4096/64000 = 1.024 sec of data) psd chan=1 blocksize=4096 total_blocks=16 chan=1, infile=c:\r0089005.dat, outfile=c:\r0089005.psd 10Sep22 12:41:14.11,D,offset=0, blocksize=4096, total_blocks=16 10Sep22 12:42:48.19,N,glcheck: 291304 bytes free, 30 blocks free, 89752 bytes alloc, 5938 blocks alloc, 10Sep22 12:42:48.35,N,Starting assignments 10Sep22 12:42:48.75,N,stmp1 = inputfilename=c:\r0089005.dat 10Sep22 12:42:49.23,N,stmp1 = outputfilename=c:\r0089005.psd 10Sep22 12:42:49.71,N,stmp1 = channel=1 10Sep22 12:42:50.18,N,stmp1 = blocksize=4096 10Sep22 12:42:50.64,N,stmp1 = offset=0 10Sep22 12:42:51.09,N,stmp1 = total_blocks=16 10Sep22 12:42:51.18,N,ParameterObject dump: 10Sep22 12:42:51.26,N, 6 pairs found: 10Sep22 12:42:51.33,N, key: ->inputfilename<- value: ->c:\r0089005.dat<- 10Sep22 12:42:51.45,N, key: ->outputfilename<- value: ->c:\r0089005.psd<- 10Sep22 12:42:51.56,N, key: ->channel<- value: ->1<- 10Sep22 12:42:51.66,N, key: ->blocksize<- value: ->4096<- 10Sep22 12:42:51.76,N, key: ->offset<- value: ->0<- 10Sep22 12:42:51.85,N, key: ->total_blocks<- value: ->16<- 10Sep22 12:42:52.02,N,estimate_psd(): input file c:\r0089005.dat exists estimate_psd(): input file c:\r0089005.dat can be opened 10Sep22 12:42:52.28,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep22 12:43:10.77,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep22 12:43:24.75,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep22 12:43:24.95,N,close(): ASGFile not valid 10Sep22 12:43:25.06,N,retval = 0 10Sep22 12:44:59.64,N,glcheck: 290708 bytes free, 45 blocks free, 89844 bytes alloc, 5944 blocks alloc, 10Sep22 12:44:59.80,N,Open files 10Sep22 12:44:59.87,N, 0, 0x000435ee, main.c, 460 10Sep22 12:44:59.96,N,pin = 116, pin err = 0, comm = 81 10Sep22 12:45:00.06,N,ARS>> # do one-third octave on same data (go up to 30kHz) # fc = 10^(45/10) = 31.623kHz (28.184kHz to 35.481kHz) # NOTE: last band may not be filled since 32kHz is our max freq oto bandmax=45 bandmax=45, infile=c:\r0089005.psd, outfile=c:\r0089005.oto 10Sep22 12:46:34.93,N,glcheck: 290708 bytes free, 45 blocks free, 89844 bytes alloc, 5944 blocks alloc, 10Sep22 12:46:36.17,N,ParameterObject dump: 10Sep22 12:46:36.25,N, 3 pairs found: 10Sep22 12:46:36.33,N, key: ->inputfilename<- value: ->c:\r0089005.psd<- 10Sep22 12:46:36.44,N, key: ->outputfilename<- value: ->c:\r0089005.oto<- 10Sep22 12:46:36.56,N, key: ->bandmax<- value: ->45<- 10Sep22 12:46:36.65,N,starting the OTO synthesizer: .... 10Sep22 12:46:45.85,N,retval = 0 10Sep22 12:48:20.37,N,glcheck: 290620 bytes free, 43 blocks free, 89908 bytes alloc, 5947 blocks alloc, 10Sep22 12:48:20.53,N,Open files 10Sep22 12:48:20.60,N, 0, 0x000435ee, main.c, 460 10Sep22 12:48:20.70,N,pin = 116, pin err = 0, comm = 81 10Sep22 12:48:20.79,N,ARS>> # sleep 60 sec = 1 minute sleep time=60 type=0 time = 60, type = 0 10Sep22 12:48:20.99,H,ARS_OK 10Sep22 12:48:21.06,D,Entering LPStopUntil secs = 1285159701, sleeping until 1285159761 with 4 big sleeps... 10Sep22 12:48:21.23,D,Comm ports closed prior to sleeping 10Sep22 12:48:21.33,D,Console port cleared and RTS asserted low 10Sep22 12:48:21.43,D,pin 23 set high 10Sep22 12:48:21.51,D,pin 24 set low 10Sep22 12:48:21.58,D,pin 25 read 10Sep22 12:48:21.65,D,pin 26 mirrored (0) 10Sep22 12:48:21.87,D,pin 27 set low 10Sep22 12:48:21.94,D,pin 28 mirrored (0) 10Sep22 12:48:22.02,D,pin 29 set high 10Sep22 12:48:22.09,D,pin 31 set high 10Sep22 12:48:22.17,D,pin 32 mirrored (0) 10Sep22 12:48:22.25,D,pin 33 mirrored (0) 10Sep22 12:48:22.33,D,pin 34 mirrored (0) 10Sep22 12:48:22.41,D,pin 35 mirrored (0) 10Sep22 12:48:22.49,D,pin 36 mirrored (-1) 10Sep22 12:48:22.57,D,pin 37 mirrored (0) 10Sep22 12:48:22.65,D,pins are set for low power 10Sep22 12:48:22.74,D,interrupt handlers installed 10Sep22 12:48:22.83,D,serial drivers, CF and TPU states set 10Sep22 12:48:22.93,D,dog stroked 10Sep22 12:48:23.04,D,low speed set 10Sep22 12:48:23.59,D,PIT set 10Sep22 12:48:36.68,D,awake from big sleep, dog stroked 10Sep22 12:48:49.73,D,awake from big sleep, dog stroked 10Sep22 12:49:02.79,D,awake from big sleep, dog stroked 10Sep22 12:49:15.84,D,awake from big sleep, dog stroked 10Sep22 12:49:16.43,D,Entering LPStopUntil secs = 1285159756, sleeping until 1285159761 for remainder sleep... 10Sep22 12:49:22.14,D,done with sleeps, dog stroked 10Sep22 12:49:22.75,D,handlers and peripheral states restored 10Sep22 12:49:22.86,D,...exiting lpStopUntil normally 10Sep22 12:49:22.96,N,Open files 10Sep22 12:49:23.03,N, 0, 0x000435ee, main.c, 460 10Sep22 12:49:23.12,N,pin = 116, pin err = 0, comm = 81 10Sep22 12:49:23.22,N,ARS>> # LOW BAND: get samples for 900 sec @ 4000 Hz sample time=900 chans=2 rate=4000 time=900, rate=4000, chans=2, syncclock=1, secondheader=0 10Sep22 12:50:57.96,N,glcheck: 290620 bytes free, 43 blocks free, 89908 bytes alloc, 5947 blocks alloc, 10Sep22 12:50:58.12,D,Entering sample for 900 secs, 4000 rate and 2 chans 10Sep22 12:50:58.23,N,Storing parameters... 10Sep22 12:50:58.46,N,Waiting for 20 second warmup 10Sep22 12:51:18.56,D,Entering sample_lowlevel 10Sep22 12:51:18.69,D,Free disk space = -189562880 10Sep22 12:51:18.78,N,Not using PicoZOOM 10Sep22 12:51:18.91,N,Opened c:\r0089006.dat for data collection 10Sep22 12:51:19.02,D,Writing out header to c:\r0089006.dat 10Sep22 12:51:19.29,N,SPIIIDAQ initialized... 10Sep22 12:51:19.38,D,Current speed = 16000 kHz 10Sep22 12:51:19.46,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep22 12:51:19.60,N,DO NOT power cycle CF2 during aquisition!!! 10Sep22 12:51:22.16,N,SEASCAN: Date = 3917:12:51:24 10Sep22 12:51:24.00,D,SEASCAN: got sync 1285159884 41 10Sep22 12:51:24.09,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00102496 seconds 10Sep22 12:54:14.98,N,SEASCAN: Date = 3917:12:54:17 10Sep22 12:54:16.99,D,SEASCAN: got sync 1285160056 39889 10Sep22 12:54:17.09,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00277495 seconds 10Sep22 12:54:17.30,N,spdqr.contig_bytes = 2256 10Sep22 12:54:17.57,N,Aquisition complete 10Sep22 12:54:17.65,D,Stats: samples = 670820, write errors = 0 spqd errors = 0, time = 1.7e+02, measured rate = 3999.96 10Sep22 12:54:17.82,D,Drift: Before Sample = 0.00102496, After Sample = -0.00277495 10Sep22 12:54:18.08,D,Flush sizes: 10Sep22 12:54:18.16,D,[0]=1 10Sep22 12:54:18.22,D,[4096]=327 10Sep22 12:54:18.29,D,Leaving sample_lowlevel due to host alert 10Sep22 12:54:18.40,D,Leaving sample 10Sep22 12:55:52.61,N,glcheck: 290908 bytes free, 31 blocks free, 89908 bytes alloc, 5947 blocks alloc, 10Sep22 12:55:52.77,N,Host Listen 10Sep22 12:55:52.84,N,Entering Host Listen State... 10Sep22 12:55:52.93,H,ARS_OK 10Sep22 12:55:53.00,N,pin = 117, pin err = 0, comm = 82 10Sep22 12:55:53.09,N,ARS>> ARS_OK 10Sep22 12:55:53.20,N,diveapogee 10Sep22 12:55:53.27,H,ARS_OK 10Sep22 12:55:53.36,N,Executing script [C:\ARAPOGEE.ARS] 10Sep22 12:55:53.45,N,Open files 10Sep22 12:55:53.52,N, 0, 0x000435ee, main.c, 1464 10Sep22 12:55:53.62,N,pin = 117, pin err = 0, comm = 82 10Sep22 12:55:53.71,N,Open files 10Sep22 12:55:53.78,N, 0, 0x000435ee, main.c, 1464 10Sep22 12:55:53.88,N,pin = 117, pin err = 0, comm = 82 10Sep22 12:55:53.97,N,ARS>> #arapogee.ars movefiles thisdive=1 maxbytes=0 10Sep22 12:55:56.16,D,Files to copy 10Sep22 12:55:56.23,D,0000 - [R0089001.DAT] 10Sep22 12:55:56.31,D,0001 - [R0089002.DAT] 10Sep22 12:55:56.40,D,0002 - [R0089003.DAT] 10Sep22 12:55:56.48,D,0003 - [R0089004.DAT] 10Sep22 12:55:56.67,D,0004 - [R0089005.DAT] 10Sep22 12:55:56.75,D,0005 - [R0089006.DAT] 10Sep22 12:55:56.84,D,Powering up BI... 10Sep22 12:56:00.89,N,power_up_bi = 1 10Sep22 12:56:00.98,D,Dive num = 89, file = R0089001.DAT 10Sep22 12:56:05.83,N,power_up_bi = 2 10Sep22 12:56:05.96,D,Opening d:\dive0089\R0089001.DAT for writing 10Sep22 12:56:06.09,D,Opening R0089001.DAT for reading 10Sep22 12:56:06.19,N,Writing file d:\dive0089\R0089001.DAT...done. 7688192 bytes 0.348550.2 secs 22057654.000000.2 bytes/sec 10Sep22 12:56:18.67,N,power_down_bi = 1 10Sep22 12:56:18.75,N,Removing file R0089001.DAT...done. 10Sep22 12:56:21.85,D,Dive num = 89, file = R0089002.DAT 10Sep22 12:56:22.08,N,power_up_bi = 2 10Sep22 12:56:22.21,D,Opening d:\dive0089\R0089002.DAT for writing 10Sep22 12:56:22.34,D,Opening R0089002.DAT for reading 10Sep22 12:56:22.44,N,Writing file d:\dive0089\R0089002.DAT...done. 7204864 bytes 0.526000.2 secs 13697459.000000.2 bytes/sec 10Sep22 12:56:34.09,N,power_down_bi = 1 10Sep22 12:56:34.17,N,Removing file R0089002.DAT...done. 10Sep22 12:56:37.02,D,Dive num = 89, file = R0089003.DAT 10Sep22 12:56:37.24,N,power_up_bi = 2 10Sep22 12:56:37.37,D,Opening d:\dive0089\R0089003.DAT for writing 10Sep22 12:56:37.50,D,Opening R0089003.DAT for reading 10Sep22 12:56:37.61,N,Writing file d:\dive0089\R0089003.DAT...done. 7684112 bytes 0.309775.2 secs 24805472.000000.2 bytes/sec 10Sep22 12:56:50.06,N,power_down_bi = 1 10Sep22 12:56:50.13,N,Removing file R0089003.DAT...done. 10Sep22 12:56:53.11,D,Dive num = 89, file = R0089004.DAT 10Sep22 12:56:53.33,N,power_up_bi = 2 10Sep22 12:56:53.46,D,Opening d:\dive0089\R0089004.DAT for writing 10Sep22 12:56:53.59,D,Opening R0089004.DAT for reading 10Sep22 12:56:53.71,N,Writing file d:\dive0089\R0089004.DAT...done. 7204864 bytes -0.402400.2 secs -17904730.000000.2 bytes/sec 10Sep22 12:57:05.43,N,power_down_bi = 1 10Sep22 12:57:05.51,N,Removing file R0089004.DAT...done. 10Sep22 12:57:08.60,D,Dive num = 89, file = R0089005.DAT 10Sep22 12:57:08.82,N,power_up_bi = 2 10Sep22 12:57:08.95,D,Opening d:\dive0089\R0089005.DAT for writing 10Sep22 12:57:09.08,D,Opening R0089005.DAT for reading 10Sep22 12:57:09.20,N,Writing file d:\dive0089\R0089005.DAT...done. 7684128 bytes 0.340000.2 secs 22600382.000000.2 bytes/sec 10Sep22 12:57:21.67,N,power_down_bi = 1 10Sep22 12:57:21.75,N,Removing file R0089005.DAT...done. 10Sep22 12:57:24.84,D,Dive num = 89, file = R0089006.DAT 10Sep22 12:57:25.07,N,power_up_bi = 2 10Sep22 12:57:25.20,D,Opening d:\dive0089\R0089006.DAT for writing 10Sep22 12:57:25.33,D,Opening R0089006.DAT for reading 10Sep22 12:57:25.45,N,Writing file d:\dive0089\R0089006.DAT...done. 1347584 bytes 0.366900.2 secs 3672892.000000.2 bytes/sec 10Sep22 12:57:28.06,N,power_down_bi = 1 10Sep22 12:57:28.14,N,Removing file R0089006.DAT...done. 10Sep22 12:57:29.34,D,Powering down BI... 10Sep22 12:57:29.78,N,power_down_bi = 0 10Sep22 12:57:29.95,N,Open files 10Sep22 12:57:30.02,N, 0, 0x000435ee, main.c, 1464 10Sep22 12:57:30.11,N,pin = 117, pin err = 0, comm = 82 10Sep22 12:57:30.21,N,ARS>> autoAuto state 10Sep22 12:57:30.33,N,Open files 10Sep22 12:57:30.40,N, 0, 0x000435ee, main.c, 1464 10Sep22 12:57:30.50,N,pin = 117, pin err = 0, comm = 82 10Sep22 12:57:30.60,N,Finished with script [C:\ARAPOGEE.ARS] 10Sep22 12:57:30.70,N,Auto state 10Sep22 12:57:30.90,N,Entering Auto State... 10Sep22 12:57:30.98,H,ARS_OK 10Sep22 12:57:31.06,N,Open files 10Sep22 12:57:31.13,N, 0, 0x000435ee, main.c, 460 10Sep22 12:57:31.22,N,pin = 117, pin err = 0, comm = 82 10Sep22 12:57:31.31,N,ARS>> # ardive.ars # edited 201009162039L BMH # # HIGH BAND: get samples for 60 sec @ 64000Hz sample time=60 chans=1 rate=64000 time=60, rate=64000, chans=1, syncclock=1, secondheader=0 10Sep22 12:59:05.97,N,glcheck: 290740 bytes free, 38 blocks free, 89908 bytes alloc, 5947 blocks alloc, 10Sep22 12:59:06.13,D,Entering sample for 60 secs, 64000 rate and 1 chans 10Sep22 12:59:06.24,N,Storing parameters... 10Sep22 12:59:06.47,N,Waiting for 20 second warmup 10Sep22 12:59:26.56,D,Entering sample_lowlevel 10Sep22 12:59:26.70,D,Free disk space = -152043520 10Sep22 12:59:26.78,N,Using PicoZOOM 10Sep22 12:59:26.96,N,Opened c:\r0089007.dat for data collection 10Sep22 12:59:27.06,D,Writing out header to c:\r0089007.dat 10Sep22 12:59:27.29,N,SPIIIDAQ initialized... 10Sep22 12:59:27.39,D,Current speed = 16000 kHz 10Sep22 12:59:27.46,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep22 12:59:27.60,N,DO NOT power cycle CF2 during aquisition!!! 10Sep22 12:59:30.39,N,SEASCAN: Date = 3917:12:59:33 10Sep22 12:59:33.00,D,SEASCAN: got sync 1285160373 41 10Sep22 12:59:33.08,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00102496 seconds 10Sep22 13:00:35.82,N,SEASCAN: Date = 3917:13:0:38 10Sep22 13:00:37.99,D,SEASCAN: got sync 1285160437 39890 10Sep22 13:00:38.08,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00274992 seconds 10Sep22 13:00:38.29,N,spdqr.contig_bytes = 1360 10Sep22 13:00:38.54,N,Aquisition complete 10Sep22 13:00:38.62,D,Stats: samples = 3840676, write errors = 0 spqd errors = 0, time = 60, measured rate = 63999.75 10Sep22 13:00:38.79,D,Drift: Before Sample = 0.00102496, After Sample = -0.00274992 10Sep22 13:00:38.92,D,Flush sizes: 10Sep22 13:00:38.99,D,[0]=1 10Sep22 13:00:39.06,D,[4096]=1864 10Sep22 13:00:39.13,D,[8192]=1 10Sep22 13:00:39.20,D,[12288]=3 10Sep22 13:00:39.27,D,Leaving sample_lowlevel normally 10Sep22 13:00:39.36,D,Leaving sample 10Sep22 13:02:13.38,N,glcheck: 290932 bytes free, 30 blocks free, 89908 bytes alloc, 5947 blocks alloc, 10Sep22 13:02:13.54,N,Open files 10Sep22 13:02:13.61,N, 0, 0x000435ee, main.c, 460 10Sep22 13:02:13.70,N,pin = 117, pin err = 0, comm = 82 10Sep22 13:02:13.79,N,ARS>> # do psd on 1st 16 blocks (16*4096/64000 = 1.024 sec of data) psd chan=1 blocksize=4096 total_blocks=16 chan=1, infile=c:\r0089007.dat, outfile=c:\r0089007.psd 10Sep22 13:02:14.24,D,offset=0, blocksize=4096, total_blocks=16 10Sep22 13:03:48.30,N,glcheck: 290932 bytes free, 30 blocks free, 89908 bytes alloc, 5947 blocks alloc, 10Sep22 13:03:48.46,N,Starting assignments 10Sep22 13:03:48.85,N,stmp1 = inputfilename=c:\r0089007.dat 10Sep22 13:03:49.34,N,stmp1 = outputfilename=c:\r0089007.psd 10Sep22 13:03:49.81,N,stmp1 = channel=1 10Sep22 13:03:50.28,N,stmp1 = blocksize=4096 10Sep22 13:03:50.74,N,stmp1 = offset=0 10Sep22 13:03:51.19,N,stmp1 = total_blocks=16 10Sep22 13:03:51.28,N,ParameterObject dump: 10Sep22 13:03:51.36,N, 6 pairs found: 10Sep22 13:03:51.43,N, key: ->inputfilename<- value: ->c:\r0089007.dat<- 10Sep22 13:03:51.55,N, key: ->outputfilename<- value: ->c:\r0089007.psd<- 10Sep22 13:03:51.66,N, key: ->channel<- value: ->1<- 10Sep22 13:03:51.76,N, key: ->blocksize<- value: ->4096<- 10Sep22 13:03:51.86,N, key: ->offset<- value: ->0<- 10Sep22 13:03:51.95,N, key: ->total_blocks<- value: ->16<- 10Sep22 13:03:52.10,N,estimate_psd(): input file c:\r0089007.dat exists estimate_psd(): input file c:\r0089007.dat can be opened 10Sep22 13:03:52.33,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep22 13:04:10.80,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep22 13:04:24.72,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep22 13:04:24.92,N,close(): ASGFile not valid 10Sep22 13:04:25.03,N,retval = 0 10Sep22 13:05:59.59,N,glcheck: 290336 bytes free, 45 blocks free, 90000 bytes alloc, 5953 blocks alloc, 10Sep22 13:05:59.75,N,Open files 10Sep22 13:05:59.82,N, 0, 0x000435ee, main.c, 460 10Sep22 13:05:59.91,N,pin = 117, pin err = 0, comm = 82 10Sep22 13:06:00.01,N,ARS>> # do one-third octave on same data (go up to 30kHz) # fc = 10^(45/10) = 31.623kHz (28.184kHz to 35.481kHz) # NOTE: last band may not be filled since 32kHz is our max freq oto bandmax=45 bandmax=45, infile=c:\r0089007.psd, outfile=c:\r0089007.oto 10Sep22 13:07:34.84,N,glcheck: 290336 bytes free, 45 blocks free, 90000 bytes alloc, 5953 blocks alloc, 10Sep22 13:07:36.08,N,ParameterObject dump: 10Sep22 13:07:36.16,N, 3 pairs found: 10Sep22 13:07:36.23,N, key: ->inputfilename<- value: ->c:\r0089007.psd<- 10Sep22 13:07:36.35,N, key: ->outputfilename<- value: ->c:\r0089007.oto<- 10Sep22 13:07:36.46,N, key: ->bandmax<- value: ->45<- 10Sep22 13:07:36.56,N,starting the OTO synthesizer: .... 10Sep22 13:07:45.80,N,retval = 0 10Sep22 13:09:20.31,N,glcheck: 290248 bytes free, 43 blocks free, 90064 bytes alloc, 5956 blocks alloc, 10Sep22 13:09:20.47,N,Open files 10Sep22 13:09:20.54,N, 0, 0x000435ee, main.c, 460 10Sep22 13:09:20.63,N,pin = 117, pin err = 0, comm = 82 10Sep22 13:09:20.72,N,ARS>> # sleep 60 sec = 1 minute sleep time=60 type=0 time = 60, type = 0 10Sep22 13:09:20.93,H,ARS_OK 10Sep22 13:09:21.00,D,Entering LPStopUntil secs = 1285160960, sleeping until 1285161020 with 4 big sleeps... 10Sep22 13:09:21.16,D,Comm ports closed prior to sleeping 10Sep22 13:09:21.26,D,Console port cleared and RTS asserted low 10Sep22 13:09:21.37,D,pin 23 set high 10Sep22 13:09:21.44,D,pin 24 set low 10Sep22 13:09:21.51,D,pin 25 read 10Sep22 13:09:21.59,D,pin 26 mirrored (0) 10Sep22 13:09:21.80,D,pin 27 set low 10Sep22 13:09:21.87,D,pin 28 mirrored (0) 10Sep22 13:09:21.95,D,pin 29 set high 10Sep22 13:09:22.03,D,pin 31 set high 10Sep22 13:09:22.10,D,pin 32 mirrored (0) 10Sep22 13:09:22.18,D,pin 33 mirrored (0) 10Sep22 13:09:22.26,D,pin 34 mirrored (0) 10Sep22 13:09:22.34,D,pin 35 mirrored (0) 10Sep22 13:09:22.42,D,pin 36 mirrored (-1) 10Sep22 13:09:22.50,D,pin 37 mirrored (0) 10Sep22 13:09:22.58,D,pins are set for low power 10Sep22 13:09:22.67,D,interrupt handlers installed 10Sep22 13:09:22.76,D,serial drivers, CF and TPU states set 10Sep22 13:09:22.86,D,dog stroked 10Sep22 13:09:22.97,D,low speed set 10Sep22 13:09:23.53,D,PIT set 10Sep22 13:09:36.60,D,awake from big sleep, dog stroked 10Sep22 13:09:49.67,D,awake from big sleep, dog stroked 10Sep22 13:10:02.72,D,awake from big sleep, dog stroked 10Sep22 13:10:15.77,D,awake from big sleep, dog stroked 10Sep22 13:10:16.34,D,Entering LPStopUntil secs = 1285161016, sleeping until 1285161020 for remainder sleep... 10Sep22 13:10:21.00,D,done with sleeps, dog stroked 10Sep22 13:10:21.58,D,handlers and peripheral states restored 10Sep22 13:10:21.69,D,...exiting lpStopUntil normally 10Sep22 13:10:21.85,N,Open files 10Sep22 13:10:21.93,N, 0, 0x000435ee, main.c, 460 10Sep22 13:10:22.02,N,pin = 117, pin err = 0, comm = 82 10Sep22 13:10:22.26,N,ARS>> # LOW BAND: get samples for 900 sec @ 4000 Hz sample time=900 chans=2 rate=4000 time=900, rate=4000, chans=2, syncclock=1, secondheader=0 10Sep22 13:11:57.02,N,glcheck: 290248 bytes free, 43 blocks free, 90064 bytes alloc, 5956 blocks alloc, 10Sep22 13:11:57.18,D,Entering sample for 900 secs, 4000 rate and 2 chans 10Sep22 13:11:57.30,N,Storing parameters... 10Sep22 13:11:57.53,N,Waiting for 20 second warmup 10Sep22 13:12:17.63,D,Entering sample_lowlevel 10Sep22 13:12:17.77,D,Free disk space = -159842304 10Sep22 13:12:17.86,N,Not using PicoZOOM 10Sep22 13:12:18.00,N,Opened c:\r0089008.dat for data collection 10Sep22 13:12:18.11,D,Writing out header to c:\r0089008.dat 10Sep22 13:12:18.34,N,SPIIIDAQ initialized... 10Sep22 13:12:18.46,D,Current speed = 16000 kHz 10Sep22 13:12:18.55,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep22 13:12:18.69,N,DO NOT power cycle CF2 during aquisition!!! 10Sep22 13:12:22.12,N,SEASCAN: Date = 3917:13:12:24 10Sep22 13:12:24.00,D,SEASCAN: got sync 1285161144 42 10Sep22 13:12:24.09,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00105 seconds 10Sep22 13:27:28.12,N,SEASCAN: Date = 3917:13:27:30 10Sep22 13:27:29.99,D,SEASCAN: got sync 1285162049 39882 10Sep22 13:27:30.09,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00294995 seconds 10Sep22 13:27:30.31,N,spdqr.contig_bytes = 3344 10Sep22 13:27:30.54,N,Aquisition complete 10Sep22 13:27:30.74,D,Stats: samples = 3600004, write errors = 0 spqd errors = 0, time = 9e+02, measured rate = 3999.99 10Sep22 13:27:30.95,D,Drift: Before Sample = 0.00105, After Sample = -0.00294995 10Sep22 13:27:31.07,D,Flush sizes: 10Sep22 13:27:31.15,D,[0]=1 10Sep22 13:27:31.22,D,[4096]=1757 10Sep22 13:27:31.29,D,Leaving sample_lowlevel normally 10Sep22 13:27:31.39,D,Leaving sample 10Sep22 13:29:05.73,N,glcheck: 290536 bytes free, 31 blocks free, 90064 bytes alloc, 5956 blocks alloc, 10Sep22 13:29:05.90,N,Open files 10Sep22 13:29:05.97,N, 0, 0x000435ee, main.c, 460 10Sep22 13:29:06.07,N,pin = 117, pin err = 0, comm = 82 10Sep22 13:29:06.17,N,ARS>> # do PSD on 16 blocks (16*4096/4000 = 16.384 sec) psd chan=2 blocksize=4096 total_blocks=16 chan=2, infile=c:\r0089008.dat, outfile=c:\r0089008.psd 10Sep22 13:29:06.48,D,offset=0, blocksize=4096, total_blocks=16 10Sep22 13:30:40.86,N,glcheck: 290536 bytes free, 31 blocks free, 90064 bytes alloc, 5956 blocks alloc, 10Sep22 13:30:41.02,N,Starting assignments 10Sep22 13:30:41.42,N,stmp1 = inputfilename=c:\r0089008.dat 10Sep22 13:30:41.91,N,stmp1 = outputfilename=c:\r0089008.psd 10Sep22 13:30:42.39,N,stmp1 = channel=2 10Sep22 13:30:42.86,N,stmp1 = blocksize=4096 10Sep22 13:30:43.32,N,stmp1 = offset=0 10Sep22 13:30:43.78,N,stmp1 = total_blocks=16 10Sep22 13:30:43.87,N,ParameterObject dump: 10Sep22 13:30:43.95,N, 6 pairs found: 10Sep22 13:30:44.03,N, key: ->inputfilename<- value: ->c:\r0089008.dat<- 10Sep22 13:30:44.15,N, key: ->outputfilename<- value: ->c:\r0089008.psd<- 10Sep22 13:30:44.27,N, key: ->channel<- value: ->2<- 10Sep22 13:30:44.48,N, key: ->blocksize<- value: ->4096<- 10Sep22 13:30:44.58,N, key: ->offset<- value: ->0<- 10Sep22 13:30:44.68,N, key: ->total_blocks<- value: ->16<- 10Sep22 13:30:44.85,N,estimate_psd(): input file c:\r0089008.dat exists estimate_psd(): input file c:\r0089008.dat can be opened 10Sep22 13:30:45.12,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep22 13:31:03.62,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep22 13:31:17.65,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep22 13:31:17.89,N,close(): ASGFile not valid 10Sep22 13:31:18.02,N,retval = 0 10Sep22 13:32:52.95,N,glcheck: 289916 bytes free, 47 blocks free, 90156 bytes alloc, 5962 blocks alloc, 10Sep22 13:32:53.14,N,Open files 10Sep22 13:32:53.25,N, 0, 0x000435ee, main.c, 460 10Sep22 13:32:53.37,N,pin = 117, pin err = 0, comm = 82 10Sep22 13:32:53.50,N,ARS>> # do one third octave on same data (go up to 2500Hz) # fc = 10^(34/10) = 2.512 kHz (2.239kHz to 2.818kHz) # NOTE: last band may not be filled since 2.5kHz is our max freq oto bandmax=34 bandmax=34, infile=c:\r0089008.psd, outfile=c:\r0089008.oto 10Sep22 13:34:28.74,N,glcheck: 289916 bytes free, 47 blocks free, 90156 bytes alloc, 5962 blocks alloc, 10Sep22 13:34:30.01,N,ParameterObject dump: 10Sep22 13:34:30.13,N, 3 pairs found: 10Sep22 13:34:30.24,N, key: ->inputfilename<- value: ->c:\r0089008.psd<- 10Sep22 13:34:30.38,N, key: ->outputfilename<- value: ->c:\r0089008.oto<- 10Sep22 13:34:30.53,N, key: ->bandmax<- value: ->34<- 10Sep22 13:34:30.66,N,starting the OTO synthesizer: .... 10Sep22 13:34:39.87,N,retval = 0 10Sep22 13:36:14.81,N,glcheck: 289828 bytes free, 45 blocks free, 90220 bytes alloc, 5965 blocks alloc, 10Sep22 13:36:15.00,N,Open files 10Sep22 13:36:15.10,N, 0, 0x000435ee, main.c, 460 10Sep22 13:36:15.23,N,pin = 117, pin err = 0, comm = 82 10Sep22 13:36:15.36,N,ARS>> # sleep 60 sec = 1 minutes sleep time=60 type=0 time = 60, type = 0 10Sep22 13:36:15.69,H,ARS_OK 10Sep22 13:36:15.79,D,Entering LPStopUntil secs = 1285162575, sleeping until 1285162635 with 4 big sleeps... 10Sep22 13:36:15.99,D,Comm ports closed prior to sleeping 10Sep22 13:36:16.12,D,Console port cleared and RTS asserted low 10Sep22 13:36:16.25,D,pin 23 set high 10Sep22 13:36:16.36,D,pin 24 set low 10Sep22 13:36:16.47,D,pin 25 read 10Sep22 13:36:16.57,D,pin 26 mirrored (0) 10Sep22 13:36:16.68,D,pin 27 set low 10Sep22 13:36:16.79,D,pin 28 mirrored (0) 10Sep22 13:36:16.90,D,pin 29 set high 10Sep22 13:36:17.01,D,pin 31 set high 10Sep22 13:36:17.11,D,pin 32 mirrored (0) 10Sep22 13:36:17.23,D,pin 33 mirrored (0) 10Sep22 13:36:17.34,D,pin 34 mirrored (0) 10Sep22 13:36:17.45,D,pin 35 mirrored (0) 10Sep22 13:36:17.56,D,pin 36 mirrored (-1) 10Sep22 13:36:17.67,D,pin 37 mirrored (0) 10Sep22 13:36:17.78,D,pins are set for low power 10Sep22 13:36:17.90,D,interrupt handlers installed 10Sep22 13:36:18.03,D,serial drivers, CF and TPU states set 10Sep22 13:36:18.26,D,dog stroked 10Sep22 13:36:18.40,D,low speed set 10Sep22 13:36:18.99,D,PIT set 10Sep22 13:36:32.07,D,awake from big sleep, dog stroked 10Sep22 13:36:45.12,D,awake from big sleep, dog stroked 10Sep22 13:36:58.18,D,awake from big sleep, dog stroked 10Sep22 13:37:11.23,D,awake from big sleep, dog stroked 10Sep22 13:37:11.83,D,Entering LPStopUntil secs = 1285162631, sleeping until 1285162635 for remainder sleep... 10Sep22 13:37:16.51,D,done with sleeps, dog stroked 10Sep22 13:37:17.11,D,handlers and peripheral states restored 10Sep22 13:37:17.23,D,...exiting lpStopUntil normally 10Sep22 13:37:17.33,N,Open files 10Sep22 13:37:17.40,N, 0, 0x000435ee, main.c, 460 10Sep22 13:37:17.50,N,pin = 117, pin err = 0, comm = 82 10Sep22 13:37:17.60,N,ARS>> # repeat this cycle loopLooping to top of file 10Sep22 13:37:17.79,N,Open files 10Sep22 13:37:17.86,N, 0, 0x000435ee, main.c, 460 10Sep22 13:37:17.96,N,pin = 117, pin err = 0, comm = 82 10Sep22 13:37:18.06,N,ARS>> # ardive.ars # edited 201009162039L BMH # # HIGH BAND: get samples for 60 sec @ 64000Hz sample time=60 chans=1 rate=64000 time=60, rate=64000, chans=1, syncclock=1, secondheader=0 10Sep22 13:38:53.12,N,glcheck: 289828 bytes free, 45 blocks free, 90220 bytes alloc, 5965 blocks alloc, 10Sep22 13:38:53.40,D,Entering sample for 60 secs, 64000 rate and 1 chans 10Sep22 13:38:53.52,N,Storing parameters... 10Sep22 13:38:53.75,N,Waiting for 20 second warmup 10Sep22 13:39:13.85,D,Entering sample_lowlevel 10Sep22 13:39:13.99,D,Free disk space = -167116800 10Sep22 13:39:14.08,N,Using PicoZOOM 10Sep22 13:39:14.26,N,Opened c:\r0089009.dat for data collection 10Sep22 13:39:14.37,D,Writing out header to c:\r0089009.dat 10Sep22 13:39:14.62,N,SPIIIDAQ initialized... 10Sep22 13:39:14.72,D,Current speed = 16000 kHz 10Sep22 13:39:14.80,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep22 13:39:14.93,N,DO NOT power cycle CF2 during aquisition!!! 10Sep22 13:39:17.76,N,SEASCAN: Date = 3917:13:39:20 10Sep22 13:39:20.00,D,SEASCAN: got sync 1285162760 42 10Sep22 13:39:20.09,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00105 seconds 10Sep22 13:40:23.21,N,SEASCAN: Date = 3917:13:40:25 10Sep22 13:40:24.99,D,SEASCAN: got sync 1285162824 39885 10Sep22 13:40:25.08,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00287509 seconds 10Sep22 13:40:25.29,N,spdqr.contig_bytes = 1360 10Sep22 13:40:25.50,N,Aquisition complete 10Sep22 13:40:25.59,D,Stats: samples = 3840676, write errors = 0 spqd errors = 0, time = 60, measured rate = 63999.70 10Sep22 13:40:25.76,D,Drift: Before Sample = 0.00105, After Sample = -0.00287509 10Sep22 13:40:25.89,D,Flush sizes: 10Sep22 13:40:25.96,D,[0]=1 10Sep22 13:40:26.03,D,[4096]=1869 10Sep22 13:40:26.11,D,[12288]=2 10Sep22 13:40:26.18,D,Leaving sample_lowlevel normally 10Sep22 13:40:26.28,D,Leaving sample 10Sep22 13:42:00.76,N,glcheck: 290188 bytes free, 30 blocks free, 90220 bytes alloc, 5965 blocks alloc, 10Sep22 13:42:00.92,N,Open files 10Sep22 13:42:01.00,N, 0, 0x000435ee, main.c, 460 10Sep22 13:42:01.09,N,pin = 117, pin err = 0, comm = 82 10Sep22 13:42:01.19,N,ARS>> # do psd on 1st 16 blocks (16*4096/64000 = 1.024 sec of data) psd chan=1 blocksize=4096 total_blocks=16 chan=1, infile=c:\r0089009.dat, outfile=c:\r0089009.psd 10Sep22 13:42:01.62,D,offset=0, blocksize=4096, total_blocks=16 10Sep22 13:43:36.12,N,glcheck: 290188 bytes free, 30 blocks free, 90220 bytes alloc, 5965 blocks alloc, 10Sep22 13:43:36.28,N,Starting assignments 10Sep22 13:43:36.68,N,stmp1 = inputfilename=c:\r0089009.dat 10Sep22 13:43:37.17,N,stmp1 = outputfilename=c:\r0089009.psd 10Sep22 13:43:37.65,N,stmp1 = channel=1 10Sep22 13:43:38.13,N,stmp1 = blocksize=4096 10Sep22 13:43:38.59,N,stmp1 = offset=0 10Sep22 13:43:39.05,N,stmp1 = total_blocks=16 10Sep22 13:43:39.13,N,ParameterObject dump: 10Sep22 13:43:39.22,N, 6 pairs found: 10Sep22 13:43:39.30,N, key: ->inputfilename<- value: ->c:\r0089009.dat<- 10Sep22 13:43:39.42,N, key: ->outputfilename<- value: ->c:\r0089009.psd<- 10Sep22 13:43:39.54,N, key: ->channel<- value: ->1<- 10Sep22 13:43:39.64,N, key: ->blocksize<- value: ->4096<- 10Sep22 13:43:39.74,N, key: ->offset<- value: ->0<- 10Sep22 13:43:39.84,N, key: ->total_blocks<- value: ->16<- 10Sep22 13:43:40.01,N,estimate_psd(): input file c:\r0089009.dat exists estimate_psd(): input file c:\r0089009.dat can be opened 10Sep22 13:43:40.28,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep22 13:43:58.77,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep22 13:44:12.74,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep22 13:44:12.95,N,close(): ASGFile not valid 10Sep22 13:44:13.06,N,retval = 0 10Sep22 13:45:48.07,N,glcheck: 289592 bytes free, 45 blocks free, 90312 bytes alloc, 5971 blocks alloc, 10Sep22 13:45:48.23,N,Open files 10Sep22 13:45:48.31,N, 0, 0x000435ee, main.c, 460 10Sep22 13:45:48.40,N,pin = 117, pin err = 0, comm = 82 10Sep22 13:45:48.50,N,ARS>> # do one-third octave on same data (go up to 30kHz) # fc = 10^(45/10) = 31.623kHz (28.184kHz to 35.481kHz) # NOTE: last band may not be filled since 32kHz is our max freq oto bandmax=45 bandmax=45, infile=c:\r0089009.psd, outfile=c:\r0089009.oto 10Sep22 13:47:23.79,N,glcheck: 289592 bytes free, 45 blocks free, 90312 bytes alloc, 5971 blocks alloc, 10Sep22 13:47:25.03,N,ParameterObject dump: 10Sep22 13:47:25.12,N, 3 pairs found: 10Sep22 13:47:25.20,N, key: ->inputfilename<- value: ->c:\r0089009.psd<- 10Sep22 13:47:25.32,N, key: ->outputfilename<- value: ->c:\r0089009.oto<- 10Sep22 13:47:25.44,N, key: ->bandmax<- value: ->45<- 10Sep22 13:47:25.54,N,starting the OTO synthesizer: .... 10Sep22 13:47:34.74,N,retval = 0 10Sep22 13:49:09.66,N,glcheck: 289504 bytes free, 43 blocks free, 90376 bytes alloc, 5974 blocks alloc, 10Sep22 13:49:09.83,N,Open files 10Sep22 13:49:09.90,N, 0, 0x000435ee, main.c, 460 10Sep22 13:49:10.00,N,pin = 117, pin err = 0, comm = 82 10Sep22 13:49:10.10,N,ARS>> # sleep 60 sec = 1 minute sleep time=60 type=0 time = 60, type = 0 10Sep22 13:49:10.32,H,ARS_OK 10Sep22 13:49:10.39,D,Entering LPStopUntil secs = 1285163350, sleeping until 1285163410 with 4 big sleeps... 10Sep22 13:49:10.56,D,Comm ports closed prior to sleeping 10Sep22 13:49:10.66,D,Console port cleared and RTS asserted low 10Sep22 13:49:10.77,D,pin 23 set high 10Sep22 13:49:10.85,D,pin 24 set low 10Sep22 13:49:10.93,D,pin 25 read 10Sep22 13:49:11.11,D,pin 26 mirrored (0) 10Sep22 13:49:11.20,D,pin 27 set low 10Sep22 13:49:11.27,D,pin 28 mirrored (0) 10Sep22 13:49:11.36,D,pin 29 set high 10Sep22 13:49:11.44,D,pin 31 set high 10Sep22 13:49:11.52,D,pin 32 mirrored (0) 10Sep22 13:49:11.60,D,pin 33 mirrored (0) 10Sep22 13:49:11.68,D,pin 34 mirrored (0) 10Sep22 13:49:11.77,D,pin 35 mirrored (0) 10Sep22 13:49:11.85,D,pin 36 mirrored (-1) 10Sep22 13:49:11.94,D,pin 37 mirrored (0) 10Sep22 13:49:12.02,D,pins are set for low power 10Sep22 13:49:12.11,D,interrupt handlers installed 10Sep22 13:49:12.21,D,serial drivers, CF and TPU states set 10Sep22 13:49:12.31,D,dog stroked 10Sep22 13:49:12.42,D,low speed set 10Sep22 13:49:13.03,D,PIT set 10Sep22 13:49:26.11,D,awake from big sleep, dog stroked 10Sep22 13:49:39.16,D,awake from big sleep, dog stroked 10Sep22 13:49:52.22,D,awake from big sleep, dog stroked 10Sep22 13:50:05.28,D,awake from big sleep, dog stroked 10Sep22 13:50:05.89,D,Entering LPStopUntil secs = 1285163405, sleeping until 1285163410 for remainder sleep... 10Sep22 13:50:11.63,D,done with sleeps, dog stroked 10Sep22 13:50:12.23,D,handlers and peripheral states restored 10Sep22 13:50:12.35,D,...exiting lpStopUntil normally 10Sep22 13:50:12.45,N,Open files 10Sep22 13:50:12.52,N, 0, 0x000435ee, main.c, 460 10Sep22 13:50:12.62,N,pin = 117, pin err = 0, comm = 82 10Sep22 13:50:12.72,N,ARS>> # LOW BAND: get samples for 900 sec @ 4000 Hz sample time=900 chans=2 rate=4000 time=900, rate=4000, chans=2, syncclock=1, secondheader=0 10Sep22 13:51:47.88,N,glcheck: 289504 bytes free, 43 blocks free, 90376 bytes alloc, 5974 blocks alloc, 10Sep22 13:51:48.04,D,Entering sample for 900 secs, 4000 rate and 2 chans 10Sep22 13:51:48.16,N,Storing parameters... 10Sep22 13:51:48.40,N,Waiting for 20 second warmup 10Sep22 13:52:08.49,D,Entering sample_lowlevel 10Sep22 13:52:08.63,D,Free disk space = -174882816 10Sep22 13:52:08.73,N,Not using PicoZOOM 10Sep22 13:52:08.86,N,Opened c:\r0089010.dat for data collection 10Sep22 13:52:08.98,D,Writing out header to c:\r0089010.dat 10Sep22 13:52:09.28,N,SPIIIDAQ initialized... 10Sep22 13:52:09.37,D,Current speed = 16000 kHz 10Sep22 13:52:09.46,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep22 13:52:09.60,N,DO NOT power cycle CF2 during aquisition!!! 10Sep22 13:52:12.86,N,SEASCAN: Date = 3917:13:52:15 10Sep22 13:52:15.00,D,SEASCAN: got sync 1285163535 41 10Sep22 13:52:15.10,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00102496 seconds 10Sep22 14:07:18.85,N,SEASCAN: Date = 3917:14:7:21 10Sep22 14:07:20.99,D,SEASCAN: got sync 1285164440 39881 10Sep22 14:07:21.09,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00297499 seconds 10Sep22 14:07:21.45,N,spdqr.contig_bytes = 3344 10Sep22 14:07:21.75,N,Aquisition complete 10Sep22 14:07:21.83,D,Stats: samples = 3600004, write errors = 0 spqd errors = 0, time = 9e+02, measured rate = 3999.99 10Sep22 14:07:22.00,D,Drift: Before Sample = 0.00102496, After Sample = -0.00297499 10Sep22 14:07:22.13,D,Flush sizes: 10Sep22 14:07:22.21,D,[0]=1 10Sep22 14:07:22.28,D,[4096]=1757 10Sep22 14:07:22.36,D,Leaving sample_lowlevel normally 10Sep22 14:07:22.46,D,Leaving sample 10Sep22 14:08:56.94,N,glcheck: 289792 bytes free, 31 blocks free, 90376 bytes alloc, 5974 blocks alloc, 10Sep22 14:08:57.10,N,Open files 10Sep22 14:08:57.17,N, 0, 0x000435ee, main.c, 460 10Sep22 14:08:57.27,N,pin = 117, pin err = 0, comm = 82 10Sep22 14:08:57.37,N,ARS>> # do PSD on 16 blocks (16*4096/4000 = 16.384 sec) psd chan=2 blocksize=4096 total_blocks=16 chan=2, infile=c:\r0089010.dat, outfile=c:\r0089010.psd 10Sep22 14:08:57.68,D,offset=0, blocksize=4096, total_blocks=16 10Sep22 14:10:32.23,N,glcheck: 289792 bytes free, 31 blocks free, 90376 bytes alloc, 5974 blocks alloc, 10Sep22 14:10:32.39,N,Starting assignments 10Sep22 14:10:32.79,N,stmp1 = inputfilename=c:\r0089010.dat 10Sep22 14:10:33.28,N,stmp1 = outputfilename=c:\r0089010.psd 10Sep22 14:10:33.76,N,stmp1 = channel=2 10Sep22 14:10:34.24,N,stmp1 = blocksize=4096 10Sep22 14:10:34.70,N,stmp1 = offset=0 10Sep22 14:10:35.16,N,stmp1 = total_blocks=16 10Sep22 14:10:35.25,N,ParameterObject dump: 10Sep22 14:10:35.44,N, 6 pairs found: 10Sep22 14:10:35.52,N, key: ->inputfilename<- value: ->c:\r0089010.dat<- 10Sep22 14:10:35.64,N, key: ->outputfilename<- value: ->c:\r0089010.psd<- 10Sep22 14:10:35.76,N, key: ->channel<- value: ->2<- 10Sep22 14:10:35.86,N, key: ->blocksize<- value: ->4096<- 10Sep22 14:10:35.96,N, key: ->offset<- value: ->0<- 10Sep22 14:10:36.06,N, key: ->total_blocks<- value: ->16<- 10Sep22 14:10:36.23,N,estimate_psd(): input file c:\r0089010.dat exists estimate_psd(): input file c:\r0089010.dat can be opened 10Sep22 14:10:36.51,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep22 14:10:55.01,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep22 14:11:09.12,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep22 14:11:09.33,N,close(): ASGFile not valid 10Sep22 14:11:09.43,N,retval = 0 10Sep22 14:12:44.62,N,glcheck: 289172 bytes free, 47 blocks free, 90468 bytes alloc, 5980 blocks alloc, 10Sep22 14:12:44.78,N,Open files 10Sep22 14:12:44.86,N, 0, 0x000435ee, main.c, 460 10Sep22 14:12:44.95,N,pin = 117, pin err = 0, comm = 82 10Sep22 14:12:45.05,N,ARS>> # do one third octave on same data (go up to 2500Hz) # fc = 10^(34/10) = 2.512 kHz (2.239kHz to 2.818kHz) # NOTE: last band may not be filled since 2.5kHz is our max freq oto bandmax=34 bandmax=34, infile=c:\r0089010.psd, outfile=c:\r0089010.oto 10Sep22 14:14:20.41,N,glcheck: 289172 bytes free, 47 blocks free, 90468 bytes alloc, 5980 blocks alloc, 10Sep22 14:14:21.65,N,ParameterObject dump: 10Sep22 14:14:21.74,N, 3 pairs found: 10Sep22 14:14:21.82,N, key: ->inputfilename<- value: ->c:\r0089010.psd<- 10Sep22 14:14:21.94,N, key: ->outputfilename<- value: ->c:\r0089010.oto<- 10Sep22 14:14:22.06,N, key: ->bandmax<- value: ->34<- 10Sep22 14:14:22.15,N,starting the OTO synthesizer: .... 10Sep22 14:14:31.81,N,retval = 0 10Sep22 14:16:06.94,N,glcheck: 289084 bytes free, 45 blocks free, 90532 bytes alloc, 5983 blocks alloc, 10Sep22 14:16:07.11,N,Open files 10Sep22 14:16:07.18,N, 0, 0x000435ee, main.c, 460 10Sep22 14:16:07.28,N,pin = 117, pin err = 0, comm = 82 10Sep22 14:16:07.38,N,ARS>> # sleep 60 sec = 1 minutes sleep time=60 type=0 time = 60, type = 0 10Sep22 14:16:07.60,H,ARS_OK 10Sep22 14:16:07.67,D,Entering LPStopUntil secs = 1285164967, sleeping until 1285165027 with 4 big sleeps... 10Sep22 14:16:07.84,D,Comm ports closed prior to sleeping 10Sep22 14:16:07.94,D,Console port cleared and RTS asserted low 10Sep22 14:16:08.05,D,pin 23 set high 10Sep22 14:16:08.13,D,pin 24 set low 10Sep22 14:16:08.21,D,pin 25 read 10Sep22 14:16:08.28,D,pin 26 mirrored (0) 10Sep22 14:16:08.37,D,pin 27 set low 10Sep22 14:16:08.44,D,pin 28 mirrored (0) 10Sep22 14:16:08.53,D,pin 29 set high 10Sep22 14:16:08.61,D,pin 31 set high 10Sep22 14:16:08.68,D,pin 32 mirrored (0) 10Sep22 14:16:08.77,D,pin 33 mirrored (0) 10Sep22 14:16:08.85,D,pin 34 mirrored (0) 10Sep22 14:16:08.94,D,pin 35 mirrored (0) 10Sep22 14:16:09.02,D,pin 36 mirrored (-1) 10Sep22 14:16:09.11,D,pin 37 mirrored (0) 10Sep22 14:16:09.32,D,pins are set for low power 10Sep22 14:16:09.42,D,interrupt handlers installed 10Sep22 14:16:09.51,D,serial drivers, CF and TPU states set 10Sep22 14:16:09.61,D,dog stroked 10Sep22 14:16:09.72,D,low speed set 10Sep22 14:16:10.31,D,PIT set 10Sep22 14:16:23.41,D,awake from big sleep, dog stroked 10Sep22 14:16:36.47,D,awake from big sleep, dog stroked 10Sep22 14:16:49.53,D,awake from big sleep, dog stroked 10Sep22 14:17:02.58,D,awake from big sleep, dog stroked 10Sep22 14:17:03.17,D,Entering LPStopUntil secs = 1285165023, sleeping until 1285165027 for remainder sleep... 10Sep22 14:17:07.86,D,done with sleeps, dog stroked 10Sep22 14:17:08.46,D,handlers and peripheral states restored 10Sep22 14:17:08.58,D,...exiting lpStopUntil normally 10Sep22 14:17:08.68,N,Open files 10Sep22 14:17:08.75,N, 0, 0x000435ee, main.c, 460 10Sep22 14:17:08.85,N,pin = 117, pin err = 0, comm = 82 10Sep22 14:17:08.95,N,ARS>> # repeat this cycle loopLooping to top of file 10Sep22 14:17:09.14,N,Open files 10Sep22 14:17:09.22,N, 0, 0x000435ee, main.c, 460 10Sep22 14:17:09.31,N,pin = 117, pin err = 0, comm = 82 10Sep22 14:17:09.41,N,ARS>> # ardive.ars # edited 201009162039L BMH # # HIGH BAND: get samples for 60 sec @ 64000Hz sample time=60 chans=1 rate=64000 time=60, rate=64000, chans=1, syncclock=1, secondheader=0 10Sep22 14:18:44.88,N,glcheck: 289084 bytes free, 45 blocks free, 90532 bytes alloc, 5983 blocks alloc, 10Sep22 14:18:45.04,D,Entering sample for 60 secs, 64000 rate and 1 chans 10Sep22 14:18:45.16,N,Storing parameters... 10Sep22 14:18:45.39,N,Waiting for 20 second warmup 10Sep22 14:19:05.49,D,Entering sample_lowlevel 10Sep22 14:19:05.63,D,Free disk space = -182157312 10Sep22 14:19:05.72,N,Using PicoZOOM 10Sep22 14:19:05.90,N,Opened c:\r0089011.dat for data collection 10Sep22 14:19:06.01,D,Writing out header to c:\r0089011.dat 10Sep22 14:19:06.27,N,SPIIIDAQ initialized... 10Sep22 14:19:06.40,D,Current speed = 16000 kHz 10Sep22 14:19:06.48,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep22 14:19:06.61,N,DO NOT power cycle CF2 during aquisition!!! 10Sep22 14:19:10.18,N,SEASCAN: Date = 3917:14:19:12 10Sep22 14:19:12.00,D,SEASCAN: got sync 1285165152 42 10Sep22 14:19:12.08,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00105 seconds 10Sep22 14:20:15.63,N,SEASCAN: Date = 3917:14:20:18 10Sep22 14:20:17.99,D,SEASCAN: got sync 1285165217 39884 10Sep22 14:20:18.09,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00289989 seconds 10Sep22 14:20:18.29,N,spdqr.contig_bytes = 4128 10Sep22 14:20:18.55,N,Aquisition complete 10Sep22 14:20:18.64,D,Stats: samples = 3840012, write errors = 0 spqd errors = 0, time = 60, measured rate = 63999.70 10Sep22 14:20:18.81,D,Drift: Before Sample = 0.00105, After Sample = -0.00289989 10Sep22 14:20:18.94,D,Flush sizes: 10Sep22 14:20:19.01,D,[4096]=1869 10Sep22 14:20:19.09,D,[12288]=2 10Sep22 14:20:19.16,D,Leaving sample_lowlevel normally 10Sep22 14:20:19.26,D,Leaving sample 10Sep22 14:21:54.03,N,glcheck: 289444 bytes free, 30 blocks free, 90532 bytes alloc, 5983 blocks alloc, 10Sep22 14:21:54.19,N,Open files 10Sep22 14:21:54.26,N, 0, 0x000435ee, main.c, 460 10Sep22 14:21:54.36,N,pin = 117, pin err = 0, comm = 82 10Sep22 14:21:54.46,N,ARS>> # do psd on 1st 16 blocks (16*4096/64000 = 1.024 sec of data) psd chan=1 blocksize=4096 total_blocks=16 chan=1, infile=c:\r0089011.dat, outfile=c:\r0089011.psd 10Sep22 14:21:54.92,D,offset=0, blocksize=4096, total_blocks=16 10Sep22 14:23:29.69,N,glcheck: 289444 bytes free, 30 blocks free, 90532 bytes alloc, 5983 blocks alloc, 10Sep22 14:23:29.86,N,Starting assignments 10Sep22 14:23:30.26,N,stmp1 = inputfilename=c:\r0089011.dat 10Sep22 14:23:30.74,N,stmp1 = outputfilename=c:\r0089011.psd 10Sep22 14:23:31.22,N,stmp1 = channel=1 10Sep22 14:23:31.70,N,stmp1 = blocksize=4096 10Sep22 14:23:32.16,N,stmp1 = offset=0 10Sep22 14:23:32.62,N,stmp1 = total_blocks=16 10Sep22 14:23:32.71,N,ParameterObject dump: 10Sep22 14:23:32.79,N, 6 pairs found: 10Sep22 14:23:32.87,N, key: ->inputfilename<- value: ->c:\r0089011.dat<- 10Sep22 14:23:32.99,N, key: ->outputfilename<- value: ->c:\r0089011.psd<- 10Sep22 14:23:33.11,N, key: ->channel<- value: ->1<- 10Sep22 14:23:33.21,N, key: ->blocksize<- value: ->4096<- 10Sep22 14:23:33.31,N, key: ->offset<- value: ->0<- 10Sep22 14:23:33.40,N, key: ->total_blocks<- value: ->16<- 10Sep22 14:23:33.58,N,estimate_psd(): input file c:\r0089011.dat exists estimate_psd(): input file c:\r0089011.dat can be opened 10Sep22 14:23:33.85,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep22 14:23:52.35,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep22 14:24:06.41,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep22 14:24:06.64,N,close(): ASGFile not valid 10Sep22 14:24:06.78,N,retval = 0 10Sep22 14:25:42.10,N,glcheck: 288848 bytes free, 45 blocks free, 90624 bytes alloc, 5989 blocks alloc, 10Sep22 14:25:42.29,N,Open files 10Sep22 14:25:42.39,N, 0, 0x000435ee, main.c, 460 10Sep22 14:25:42.52,N,pin = 117, pin err = 0, comm = 82 10Sep22 14:25:42.64,N,ARS>> # do one-third octave on same data (go up to 30kHz) # fc = 10^(45/10) = 31.623kHz (28.184kHz to 35.481kHz) # NOTE: last band may not be filled since 32kHz is our max freq oto bandmax=45 bandmax=45, infile=c:\r0089011.psd, outfile=c:\r0089011.oto 10Sep22 14:27:18.38,N,glcheck: 288848 bytes free, 45 blocks free, 90624 bytes alloc, 5989 blocks alloc, 10Sep22 14:27:19.65,N,ParameterObject dump: 10Sep22 14:27:19.76,N, 3 pairs found: 10Sep22 14:27:19.87,N, key: ->inputfilename<- value: ->c:\r0089011.psd<- 10Sep22 14:27:20.02,N, key: ->outputfilename<- value: ->c:\r0089011.oto<- 10Sep22 14:27:20.16,N, key: ->bandmax<- value: ->45<- 10Sep22 14:27:20.29,N,starting the OTO synthesizer: .... 10Sep22 14:27:29.52,N,retval = 0 10Sep22 14:29:04.77,N,glcheck: 288760 bytes free, 43 blocks free, 90688 bytes alloc, 5992 blocks alloc, 10Sep22 14:29:04.94,N,Open files 10Sep22 14:29:05.01,N, 0, 0x000435ee, main.c, 460 10Sep22 14:29:05.10,N,pin = 117, pin err = 0, comm = 82 10Sep22 14:29:05.20,N,ARS>> # sleep 60 sec = 1 minute sleep time=60 type=0 time = 60, type = 0 10Sep22 14:29:05.42,H,ARS_OK 10Sep22 14:29:05.49,D,Entering LPStopUntil secs = 1285165745, sleeping until 1285165805 with 4 big sleeps... 10Sep22 14:29:05.67,D,Comm ports closed prior to sleeping 10Sep22 14:29:05.77,D,Console port cleared and RTS asserted low 10Sep22 14:29:05.87,D,pin 23 set high 10Sep22 14:29:05.95,D,pin 24 set low 10Sep22 14:29:06.03,D,pin 25 read 10Sep22 14:29:06.11,D,pin 26 mirrored (0) 10Sep22 14:29:06.19,D,pin 27 set low 10Sep22 14:29:06.38,D,pin 28 mirrored (0) 10Sep22 14:29:06.46,D,pin 29 set high 10Sep22 14:29:06.54,D,pin 31 set high 10Sep22 14:29:06.62,D,pin 32 mirrored (0) 10Sep22 14:29:06.70,D,pin 33 mirrored (0) 10Sep22 14:29:06.79,D,pin 34 mirrored (0) 10Sep22 14:29:06.87,D,pin 35 mirrored (0) 10Sep22 14:29:06.96,D,pin 36 mirrored (-1) 10Sep22 14:29:07.04,D,pin 37 mirrored (0) 10Sep22 14:29:07.12,D,pins are set for low power 10Sep22 14:29:07.21,D,interrupt handlers installed 10Sep22 14:29:07.31,D,serial drivers, CF and TPU states set 10Sep22 14:29:07.41,D,dog stroked 10Sep22 14:29:07.52,D,low speed set 10Sep22 14:29:08.11,D,PIT set 10Sep22 14:29:21.19,D,awake from big sleep, dog stroked 10Sep22 14:29:34.25,D,awake from big sleep, dog stroked 10Sep22 14:29:47.32,D,awake from big sleep, dog stroked 10Sep22 14:30:00.36,D,awake from big sleep, dog stroked 10Sep22 14:30:00.95,D,Entering LPStopUntil secs = 1285165800, sleeping until 1285165805 for remainder sleep... 10Sep22 14:30:06.66,D,done with sleeps, dog stroked 10Sep22 14:30:07.26,D,handlers and peripheral states restored 10Sep22 14:30:07.39,D,...exiting lpStopUntil normally 10Sep22 14:30:07.48,N,Open files 10Sep22 14:30:07.55,N, 0, 0x000435ee, main.c, 460 10Sep22 14:30:07.65,N,pin = 117, pin err = 0, comm = 82 10Sep22 14:30:07.75,N,ARS>> # LOW BAND: get samples for 900 sec @ 4000 Hz sample time=900 chans=2 rate=4000 time=900, rate=4000, chans=2, syncclock=1, secondheader=0 10Sep22 14:31:43.19,N,glcheck: 288760 bytes free, 43 blocks free, 90688 bytes alloc, 5992 blocks alloc, 10Sep22 14:31:43.35,D,Entering sample for 900 secs, 4000 rate and 2 chans 10Sep22 14:31:43.47,N,Storing parameters... 10Sep22 14:31:43.71,N,Waiting for 20 second warmup 10Sep22 14:31:44.80,N,Leaving sample due to host alert 10Sep22 14:33:19.92,N,glcheck: 288760 bytes free, 43 blocks free, 90688 bytes alloc, 5992 blocks alloc, 10Sep22 14:33:20.08,N,Host Listen 10Sep22 14:33:20.15,N,Entering Host Listen State... 10Sep22 14:33:20.25,H,ARS_OK 10Sep22 14:33:20.32,N,pin = 118, pin err = 0, comm = 82 10Sep22 14:33:20.42,N,ARS>> ARS_OK 10Sep22 14:33:20.52,H,ARS_OK 10Sep22 14:33:20.60,H,ARS_OK 10Sep22 14:33:20.67,H,ARS_OK 10Sep22 14:33:20.74,H,ARS_OK 10Sep22 14:33:20.82,H,ARS_OK 10Sep22 14:33:20.91,N,divefinish 10Sep22 14:33:20.98,H,ARS_OK 10Sep22 14:33:21.10,D,Executing [rename C:\ARS.LOG c:\tmp.log]