10Sep18 17:11:58.00,N,Compressing c:\tmp.log to c:\ar0032lz.x... 10Sep18 17:12:10.61,N,Executing script [C:\ARENDIVE.ARS] 10Sep18 17:12:10.70,N,Open files 10Sep18 17:12:10.77,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:12:10.86,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:12:10.95,N,Open files 10Sep18 17:12:11.01,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:12:11.10,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:12:11.32,N,ARS>> #arendiv2.ars tarcompress remove=2 Extension buffer [PSD,OTO] 10Sep18 17:12:11.58,D,Parsed ext [PSD] 10Sep18 17:12:11.65,D,Parsed ext [OTO] 10Sep18 17:12:11.72,D,total extensions = 2 10Sep18 17:12:12.09,N,WARNING - no files found to add to upload 10Sep18 17:12:12.20,N,Open files 10Sep18 17:12:12.27,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:12:12.35,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:12:12.44,N,ARS>> movefiles thisdive=1 maxbytes=010Sep18 17:12:13.52,D,Files to copy 10Sep18 17:12:13.59,D,0000 - [R0032007.DAT] 10Sep18 17:12:13.67,D,0001 - [R0032008.DAT] 10Sep18 17:12:13.75,D,0002 - [R0032009.DAT] 10Sep18 17:12:13.83,D,0003 - [R0032010.DAT] 10Sep18 17:12:13.91,D,0004 - [R0032011.DAT] 10Sep18 17:12:13.99,D,0005 - [R0032012.DAT] 10Sep18 17:12:14.06,D,Powering up BI... 10Sep18 17:12:18.09,N,power_up_bi = 1 10Sep18 17:12:18.18,D,Dive num = 32, file = R0032007.DAT 10Sep18 17:12:18.29,N,power_up_bi = 2 10Sep18 17:12:18.42,D,Opening d:\dive0032\R0032007.DAT for writing 10Sep18 17:12:18.54,D,Opening R0032007.DAT for reading 10Sep18 17:12:18.77,N,Writing file d:\dive0032\R0032007.DAT...done. 3846144 bytes -0.741800.2 secs -5184879.500000.2 bytes/sec 10Sep18 17:12:25.15,N,power_down_bi = 1 10Sep18 17:12:25.23,N,Removing file R0032007.DAT...done. 10Sep18 17:12:26.78,D,Dive num = 32, file = R0032008.DAT 10Sep18 17:12:27.00,N,power_up_bi = 2 10Sep18 17:12:27.11,D,Opening d:\dive0032\R0032008.DAT for writing 10Sep18 17:12:27.23,D,Opening R0032008.DAT for reading 10Sep18 17:12:27.32,N,Writing file d:\dive0032\R0032008.DAT...done. 3846144 bytes 0.331125.2 secs 11615392.000000.2 bytes/sec 10Sep18 17:12:33.79,N,power_down_bi = 1 10Sep18 17:12:33.86,N,Removing file R0032008.DAT...done. 10Sep18 17:12:35.32,D,Dive num = 32, file = R0032009.DAT 10Sep18 17:12:35.53,N,power_up_bi = 2 10Sep18 17:12:35.66,D,Opening d:\dive0032\R0032009.DAT for writing 10Sep18 17:12:35.77,D,Opening R0032009.DAT for reading 10Sep18 17:12:35.87,N,Writing file d:\dive0032\R0032009.DAT...done. 3846144 bytes -0.678525.2 secs -5668390.000000.2 bytes/sec 10Sep18 17:12:42.32,N,power_down_bi = 1 10Sep18 17:12:42.39,N,Removing file R0032009.DAT...done. 10Sep18 17:12:43.87,D,Dive num = 32, file = R0032010.DAT 10Sep18 17:12:44.09,N,power_up_bi = 2 10Sep18 17:12:44.33,D,Opening d:\dive0032\R0032010.DAT for writing 10Sep18 17:12:44.45,D,Opening R0032010.DAT for reading 10Sep18 17:12:44.55,N,Writing file d:\dive0032\R0032010.DAT...done. 3846144 bytes 0.316200.2 secs 12163643.000000.2 bytes/sec 10Sep18 17:12:50.99,N,power_down_bi = 1 10Sep18 17:12:51.06,N,Removing file R0032010.DAT...done. 10Sep18 17:12:52.58,D,Dive num = 32, file = R0032011.DAT 10Sep18 17:12:52.79,N,power_up_bi = 2 10Sep18 17:12:52.90,D,Opening d:\dive0032\R0032011.DAT for writing 10Sep18 17:12:53.02,D,Opening R0032011.DAT for reading 10Sep18 17:12:53.12,N,Writing file d:\dive0032\R0032011.DAT...done. 3846144 bytes 0.337925.2 secs 11381651.000000.2 bytes/sec 10Sep18 17:12:59.58,N,power_down_bi = 1 10Sep18 17:12:59.65,N,Removing file R0032011.DAT...done. 10Sep18 17:13:01.15,D,Dive num = 32, file = R0032012.DAT 10Sep18 17:13:01.36,N,power_up_bi = 2 10Sep18 17:13:01.48,D,Opening d:\dive0032\R0032012.DAT for writing 10Sep18 17:13:01.60,D,Opening R0032012.DAT for reading 10Sep18 17:13:01.70,N,Writing file d:\dive0032\R0032012.DAT...done. 3846144 bytes -0.689075.2 secs -5581604.500000.2 bytes/sec 10Sep18 17:13:08.14,N,power_down_bi = 1 10Sep18 17:13:08.21,N,Removing file R0032012.DAT...done. 10Sep18 17:13:10.47,D,Powering down BI... 10Sep18 17:13:10.90,N,power_down_bi = 0 10Sep18 17:13:11.07,N,Open files 10Sep18 17:13:11.14,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:13:11.23,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:13:11.32,N,ARS>> Open files 10Sep18 17:13:11.41,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:13:11.50,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:13:11.58,N,Finished with script [C:\ARENDIVE.ARS] 10Sep18 17:13:11.68,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:13:11.77,N,ARS>> fg reset=1 10Sep18 17:13:51.56,D,First read 10Sep18 17:13:51.62,D,AD accumulator 1: 37557051 10Sep18 17:13:51.71,D,AD overflows 1: 0 10Sep18 17:13:51.78,D,AD accumulator 2: 36930155 10Sep18 17:13:51.87,D,AD overflows 2: 0 10Sep18 17:13:51.95,D,AD sample count: 16007 10Sep18 17:13:52.03,D,Second read 10Sep18 17:13:52.10,D,AD accumulator 1: 37558995 10Sep18 17:13:52.18,D,AD overflows 1: 0 10Sep18 17:13:52.26,D,AD accumulator 2: 36932465 10Sep18 17:13:52.34,D,AD overflows 2: 0 10Sep18 17:13:52.42,D,AD sample count: 16008 10Sep18 17:13:52.50,N,avg current = 7.69767, sample_time = 11582.3 10Sep18 17:13:52.60,H,7.69767,11582.3,ARS_OK 10Sep18 17:13:52.81,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:13:53.03,N,ARS>> ARS_OK 10Sep18 17:13:53.94,N,set 10Sep18 17:13:54.03,H,DIVENUM=32 10Sep18 17:13:54.15,H,SAMPLENUM=12 10Sep18 17:13:54.27,H,OUTLEVEL=2 10Sep18 17:13:54.39,H,LOGFILE=C:\ARS.LOG 10Sep18 17:13:54.52,H,FGSLOPE=0.0033 10Sep18 17:13:54.65,H,FGYINT=-0.045 10Sep18 17:13:54.77,H,FORCETOHOST=0 10Sep18 17:13:54.89,H,WARMUP=20 10Sep18 17:13:55.01,H,UPLOADEXTS=PSD,OTO 10Sep18 17:13:55.14,H,HEAPDBG=0 10Sep18 17:13:55.26,H,ARSMODEL=3 10Sep18 17:13:55.38,H,ARSSERIAL=5 10Sep18 17:13:55.50,H,ARSCH1GAIN=200 10Sep18 17:13:55.62,H,ARSCH2GAIN=200 10Sep18 17:13:55.75,H,ARSCH1FLT=30000 10Sep18 17:13:55.87,H,ARSCH2FLT=1200 10Sep18 17:13:56.00,H,FGCLKCORR=0.940588 10Sep18 17:13:56.13,H,CHKOPENFILES=1 10Sep18 17:13:56.25,H,EPOCHTS=0 10Sep18 17:13:56.34,H,ARS_OK 10Sep18 17:13:56.40,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:13:56.49,N,ARS>> reportdisk 10Sep18 17:13:56.60,H,CDRIVE_FREE=8440938496 10Sep18 17:13:56.69,H,CDRIVE_SIZE=8453062656 10Sep18 17:13:56.78,D,Powering up BI... 10Sep18 17:14:01.32,N,power_up_bi = 1 10Sep18 17:14:01.39,H,DDRIVE_FREE=58863550464 10Sep18 17:14:01.49,H,DDRIVE_SIZE=59996930048 10Sep18 17:14:01.58,D,Powering down BI... 10Sep18 17:14:02.02,N,power_down_bi = 0 10Sep18 17:14:02.09,H,ARS_OK 10Sep18 17:14:02.16,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:14:02.25,N,ARS>> ARS_OK 10Sep18 17:14:58.17,N,clock set=rtc read=manual date=09/18/2010 time=17:15:00 sync=2 10Sep18 17:15:00.00,H,ARS_OK 10Sep18 17:15:00.06,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:15:00.15,N,ARS>> clock read=rtc set=seascan 10Sep18 17:15:03.70,D,SEASCAN: unlock successful n = 4, resp = :10Sep18 17:15:07.29,H,ARS_OK 10Sep18 17:15:07.36,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:15:07.45,N,ARS>> ARS_OK 10Sep18 17:15:34.54,N,luf 10Sep18 17:15:34.66,H,ar0032lz.x,ARS_OK 10Sep18 17:15:34.76,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:15:34.85,N,ARS>> kermit send=ar0032lz.x 10Sep18 17:15:46.29,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:15:46.38,N,ARS>> duf 10Sep18 17:15:46.67,H,ARS_OK 10Sep18 17:15:46.74,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:15:46.83,N,ARS>> ARS_OK 10Sep18 17:20:52.80,N,kermit 10Sep18 17:20:54.80,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:20:54.91,N,ARS>> postdownload 10Sep18 17:20:55.11,N,Decompressing C:\ARSCRIPT.TGZ to C:\ARSCRIPT.TAR... 10Sep18 17:20:55.64,N,Extracting arapogee.ars (50 bytes) ... 10Sep18 17:20:55.93,N,Extracting arbgdive.ars (288 bytes) ... 10Sep18 17:20:56.20,N,Extracting ardive.ars (773 bytes) ... 10Sep18 17:20:56.51,N,Extracting arendive.ars (66 bytes) ... 10Sep18 17:20:56.77,N,Warning - not enough padding blocks at the end 10Sep18 17:20:57.05,H,ARS_OK 10Sep18 17:20:57.11,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:20:57.20,N,ARS>> ARS_OK 10Sep18 17:22:58.27,N,set 10Sep18 17:22:58.36,H,DIVENUM=32 10Sep18 17:22:58.48,H,SAMPLENUM=12 10Sep18 17:22:58.60,H,OUTLEVEL=2 10Sep18 17:22:58.72,H,LOGFILE=C:\ARS.LOG 10Sep18 17:22:58.85,H,FGSLOPE=0.0033 10Sep18 17:22:58.98,H,FGYINT=-0.045 10Sep18 17:22:59.10,H,FORCETOHOST=0 10Sep18 17:22:59.22,H,WARMUP=20 10Sep18 17:22:59.34,H,UPLOADEXTS=PSD,OTO 10Sep18 17:22:59.47,H,HEAPDBG=0 10Sep18 17:22:59.59,H,ARSMODEL=3 10Sep18 17:22:59.71,H,ARSSERIAL=5 10Sep18 17:22:59.83,H,ARSCH1GAIN=200 10Sep18 17:22:59.95,H,ARSCH2GAIN=200 10Sep18 17:23:00.08,H,ARSCH1FLT=30000 10Sep18 17:23:00.20,H,ARSCH2FLT=1200 10Sep18 17:23:00.33,H,FGCLKCORR=0.940588 10Sep18 17:23:00.46,H,CHKOPENFILES=1 10Sep18 17:23:00.58,H,EPOCHTS=0 10Sep18 17:23:00.67,H,ARS_OK 10Sep18 17:23:00.74,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:00.83,N,ARS>> reportdisk 10Sep18 17:23:01.07,H,CDRIVE_FREE=8440971264 10Sep18 17:23:01.16,H,CDRIVE_SIZE=8453062656 10Sep18 17:23:01.26,D,Powering up BI... 10Sep18 17:23:05.27,N,power_up_bi = 1 10Sep18 17:23:05.34,H,DDRIVE_FREE=58863550464 10Sep18 17:23:05.44,H,DDRIVE_SIZE=59996930048 10Sep18 17:23:05.53,D,Powering down BI... 10Sep18 17:23:05.96,N,power_down_bi = 0 10Sep18 17:23:06.04,H,ARS_OK 10Sep18 17:23:06.10,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:06.19,N,ARS>> set DIVENUM=33 10Sep18 17:23:08.08,N,DIVENUM=33 10Sep18 17:23:08.16,H,ARS_OK 10Sep18 17:23:08.23,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:08.32,N,ARS>> set SAMPLENUM=0 10Sep18 17:23:08.56,N,SAMPLENUM=0 10Sep18 17:23:08.65,H,ARS_OK 10Sep18 17:23:08.71,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:08.80,N,ARS>> divestart 10Sep18 17:23:08.91,H,NOTIFY_APOGEE,ARS_OK 10Sep18 17:23:09.03,N,Executing script [C:\ARBGDIVE.ARS] 10Sep18 17:23:09.12,N,Open files 10Sep18 17:23:09.19,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:09.28,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:09.37,N,Open files 10Sep18 17:23:09.57,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:09.66,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:09.75,N,ARS>> #arbgdive.ars set ARSMODEL=3 10Sep18 17:23:09.90,N,ARSMODEL=3 10Sep18 17:23:09.99,H,ARS_OK 10Sep18 17:23:10.05,N,Open files 10Sep18 17:23:10.12,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:10.21,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:10.30,N,ARS>> set ARSSERIAL=5 10Sep18 17:23:10.41,N,ARSSERIAL=5 10Sep18 17:23:10.50,H,ARS_OK 10Sep18 17:23:10.56,N,Open files 10Sep18 17:23:10.63,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:10.72,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:10.81,N,ARS>> set ARSCH1GAIN=200 10Sep18 17:23:10.93,N,ARSCH1GAIN=200 10Sep18 17:23:11.02,H,ARS_OK 10Sep18 17:23:11.08,N,Open files 10Sep18 17:23:11.15,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:11.24,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:11.33,N,ARS>> set ARSCH2GAIN=200 10Sep18 17:23:11.45,N,ARSCH2GAIN=200 10Sep18 17:23:11.54,H,ARS_OK 10Sep18 17:23:11.60,N,Open files 10Sep18 17:23:11.81,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:11.90,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:11.99,N,ARS>> set ARSCH1FLT=30000 10Sep18 17:23:12.11,N,ARSCH1FLT=30000 10Sep18 17:23:12.20,H,ARS_OK 10Sep18 17:23:12.26,N,Open files 10Sep18 17:23:12.33,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:12.42,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:12.51,N,ARS>> set ARSCH2FLT=1200 10Sep18 17:23:12.63,N,ARSCH2FLT=1200 10Sep18 17:23:12.71,H,ARS_OK 10Sep18 17:23:12.78,N,Open files 10Sep18 17:23:12.85,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:12.94,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:13.03,N,ARS>> set FORCETOHOST=0 10Sep18 17:23:13.15,N,FORCETOHOST=0 10Sep18 17:23:13.23,H,ARS_OK 10Sep18 17:23:13.30,N,Open files 10Sep18 17:23:13.36,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:13.45,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:13.54,N,ARS>> set UPLOADEXTS=PSD,OTO 10Sep18 17:23:13.70,N,UPLOADEXTS=PSD,OTO 10Sep18 17:23:13.79,H,ARS_OK 10Sep18 17:23:13.86,N,Open files 10Sep18 17:23:13.92,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:14.15,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:14.24,N,ARS>> set WARMUP=20 10Sep18 17:23:14.35,N,WARMUP=20 10Sep18 17:23:14.44,H,ARS_OK 10Sep18 17:23:14.50,N,Open files 10Sep18 17:23:14.57,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:14.66,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:14.75,N,ARS>> set OUTLEVEL=2 10Sep18 17:23:14.86,N,OUTLEVEL=2 10Sep18 17:23:14.95,H,ARS_OK 10Sep18 17:23:15.01,N,Open files 10Sep18 17:23:15.08,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:15.17,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:15.26,N,ARS>> set LOGFILE=C:\ARS.LOG 10Sep18 17:23:15.42,N,LOGFILE=C:\ARS.LOG 10Sep18 17:23:15.51,H,ARS_OK 10Sep18 17:23:15.57,N,Open files 10Sep18 17:23:15.64,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:15.73,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:15.82,N,ARS>> set HEAPDBG=0 10Sep18 17:23:15.93,N,HEAPDBG=0 10Sep18 17:23:16.02,H,ARS_OK 10Sep18 17:23:16.08,N,Open files 10Sep18 17:23:16.15,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:16.24,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:16.47,N,ARS>> set FGSLOPE=0.0033 10Sep18 17:23:16.59,N,FGSLOPE=0.0033 10Sep18 17:23:16.68,H,ARS_OK 10Sep18 17:23:16.74,N,Open files 10Sep18 17:23:16.81,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:16.90,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:16.98,N,ARS>> set FGYINT=-0.045 10Sep18 17:23:17.11,N,FGYINT=-0.045 10Sep18 17:23:17.19,H,ARS_OK 10Sep18 17:23:17.26,N,Open files 10Sep18 17:23:17.32,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:17.41,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:17.50,N,ARS>> set FGCLKCORR=0.94058810Sep18 17:23:17.64,N,FGCLKCORR=0.940588 10Sep18 17:23:17.73,H,ARS_OK 10Sep18 17:23:17.79,N,Open files 10Sep18 17:23:17.86,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:17.95,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:18.04,N,ARS>> Open files 10Sep18 17:23:18.13,N, 0, 0x000435ee, main.c, 1464 10Sep18 17:23:18.22,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:18.31,N,Finished with script [C:\ARBGDIVE.ARS] 10Sep18 17:23:18.40,N,Auto state 10Sep18 17:23:18.47,N,Entering Auto State... 10Sep18 17:23:18.55,H,ARS_OK 10Sep18 17:23:18.73,N,Open files 10Sep18 17:23:18.80,N, 0, 0x000435ee, main.c, 460 10Sep18 17:23:18.89,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:23:18.98,N,ARS>> #ardive.ars #HIGH BAND: get samples for 20 sec @ 64000Hz sample time=60 chans=1 rate=64000 time=60, rate=64000, chans=1, syncclock=1, secondheader=0 10Sep18 17:24:18.41,N,glcheck: 380992 bytes free, 14 blocks free, 53152 bytes alloc, 3742 blocks alloc, 10Sep18 17:24:18.57,D,Entering sample for 60 secs, 64000 rate and 1 chans 10Sep18 17:24:18.68,N,Storing parameters... 10Sep18 17:24:18.90,N,Waiting for 20 second warmup 10Sep18 17:24:38.99,D,Entering sample_lowlevel 10Sep18 17:24:39.12,D,Free disk space = -148963328 10Sep18 17:24:39.21,N,Using PicoZOOM 10Sep18 17:24:39.38,N,Opened c:\r0033001.dat for data collection 10Sep18 17:24:39.47,D,Writing out header to c:\r0033001.dat 10Sep18 17:24:39.72,N,SPIIIDAQ initialized... 10Sep18 17:24:39.85,D,Current speed = 16000 kHz 10Sep18 17:24:39.93,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep18 17:24:40.07,N,DO NOT power cycle CF2 during aquisition!!! 10Sep18 17:24:43.67,N,SEASCAN: Date = 3913:17:24:46 10Sep18 17:24:46.00,D,SEASCAN: got sync 1284830686 42 10Sep18 17:24:46.08,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00105 seconds 10Sep18 17:25:49.10,N,SEASCAN: Date = 3913:17:25:51 10Sep18 17:25:50.99,D,SEASCAN: got sync 1284830750 39888 10Sep18 17:25:51.08,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00279999 seconds 10Sep18 17:25:51.29,N,spdqr.contig_bytes = 1360 10Sep18 17:25:51.52,N,Aquisition complete 10Sep18 17:25:51.60,D,Stats: samples = 3840676, write errors = 0 spqd errors = 0, time = 60, measured rate = 63999.72 10Sep18 17:25:51.76,D,Drift: Before Sample = 0.00105, After Sample = -0.00279999 10Sep18 17:25:51.88,D,Flush sizes: 10Sep18 17:25:51.95,D,[0]=1 10Sep18 17:25:52.01,D,[4096]=1866 10Sep18 17:25:52.08,D,[12288]=3 10Sep18 17:25:52.15,D,Leaving sample_lowlevel normally 10Sep18 17:25:52.24,D,Leaving sample 10Sep18 17:26:51.36,N,glcheck: 381112 bytes free, 9 blocks free, 53152 bytes alloc, 3742 blocks alloc, 10Sep18 17:26:51.52,N,Open files 10Sep18 17:26:51.58,N, 0, 0x000435ee, main.c, 460 10Sep18 17:26:51.67,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:26:51.76,N,ARS>> # do psd on 1st 8 blocks (8*4096/64000 = .512sec of data) psd chan=1 blocksize=4096 total_blocks=16 chan=1, infile=c:\r0033001.dat, outfile=c:\r0033001.psd 10Sep18 17:26:52.04,D,offset=0, blocksize=4096, total_blocks=16 10Sep18 17:27:51.20,N,glcheck: 381112 bytes free, 9 blocks free, 53152 bytes alloc, 3742 blocks alloc, 10Sep18 17:27:51.35,N,Starting assignments 10Sep18 17:27:51.63,N,stmp1 = inputfilename=c:\r0033001.dat 10Sep18 17:27:51.97,N,stmp1 = outputfilename=c:\r0033001.psd 10Sep18 17:27:52.33,N,stmp1 = channel=1 10Sep18 17:27:52.85,N,stmp1 = blocksize=4096 10Sep18 17:27:53.24,N,stmp1 = offset=0 10Sep18 17:27:53.63,N,stmp1 = total_blocks=16 10Sep18 17:27:53.71,N,ParameterObject dump: 10Sep18 17:27:53.79,N, 6 pairs found: 10Sep18 17:27:53.90,N, key: ->inputfilename<- value: ->c:\r0033001.dat<- 10Sep18 17:27:54.01,N, key: ->outputfilename<- value: ->c:\r0033001.psd<- 10Sep18 17:27:54.12,N, key: ->channel<- value: ->1<- 10Sep18 17:27:54.21,N, key: ->blocksize<- value: ->4096<- 10Sep18 17:27:54.30,N, key: ->offset<- value: ->0<- 10Sep18 17:27:54.39,N, key: ->total_blocks<- value: ->16<- 10Sep18 17:27:54.53,N,estimate_psd(): input file c:\r0033001.dat exists estimate_psd(): input file c:\r0033001.dat can be opened 10Sep18 17:27:54.75,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep18 17:28:13.15,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep18 17:28:26.98,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep18 17:28:27.18,N,close(): ASGFile not valid 10Sep18 17:28:27.28,N,retval = 0 10Sep18 17:29:26.95,N,glcheck: 380464 bytes free, 25 blocks free, 53272 bytes alloc, 3748 blocks alloc, 10Sep18 17:29:27.11,N,Open files 10Sep18 17:29:27.18,N, 0, 0x000435ee, main.c, 460 10Sep18 17:29:27.27,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:29:27.35,N,ARS>> # do one-third octave on same data (go up to 30kHz) # fc = 10^(45/10) = 31.623kHz (28.184kHz to 35.481kHz) # NOTE: last band may not be filled since 32kHz is our max freq oto bandmax=45 bandmax=45, infile=c:\r0033001.psd, outfile=c:\r0033001.oto 10Sep18 17:30:27.17,N,glcheck: 380464 bytes free, 25 blocks free, 53272 bytes alloc, 3748 blocks alloc, 10Sep18 17:30:28.24,N,ParameterObject dump: 10Sep18 17:30:28.45,N, 3 pairs found: 10Sep18 17:30:28.52,N, key: ->inputfilename<- value: ->c:\r0033001.psd<- 10Sep18 17:30:28.63,N, key: ->outputfilename<- value: ->c:\r0033001.oto<- 10Sep18 17:30:28.74,N, key: ->bandmax<- value: ->45<- 10Sep18 17:30:28.83,N,starting the OTO synthesizer: .... 10Sep18 17:30:38.05,N,retval = 0 10Sep18 17:31:37.68,N,glcheck: 380452 bytes free, 21 blocks free, 53308 bytes alloc, 3751 blocks alloc, 10Sep18 17:31:37.84,N,Open files 10Sep18 17:31:37.91,N, 0, 0x000435ee, main.c, 460 10Sep18 17:31:38.00,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:31:38.09,N,ARS>> #LOW BAND: get samples for 30 sec @ 5000Hz sample time=900 chans=2 rate=4000 time=900, rate=4000, chans=2, syncclock=1, secondheader=0 10Sep18 17:32:37.73,N,glcheck: 380452 bytes free, 21 blocks free, 53308 bytes alloc, 3751 blocks alloc, 10Sep18 17:32:37.88,D,Entering sample for 900 secs, 4000 rate and 2 chans 10Sep18 17:32:38.00,N,Storing parameters... 10Sep18 17:32:38.22,N,Waiting for 20 second warmup 10Sep18 17:32:58.31,D,Entering sample_lowlevel 10Sep18 17:32:58.44,D,Free disk space = -156729344 10Sep18 17:32:58.52,N,Not using PicoZOOM 10Sep18 17:32:58.66,N,Opened c:\r0033002.dat for data collection 10Sep18 17:32:58.76,D,Writing out header to c:\r0033002.dat 10Sep18 17:32:59.01,N,SPIIIDAQ initialized... 10Sep18 17:32:59.12,D,Current speed = 16000 kHz 10Sep18 17:32:59.34,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep18 17:32:59.48,N,DO NOT power cycle CF2 during aquisition!!! 10Sep18 17:33:01.95,N,SEASCAN: Date = 3913:17:33:4 10Sep18 17:33:04.00,D,SEASCAN: got sync 1284831184 41 10Sep18 17:33:04.09,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00102496 seconds 10Sep18 17:48:07.92,N,SEASCAN: Date = 3913:17:48:10 10Sep18 17:48:09.99,D,SEASCAN: got sync 1284832089 39991 10Sep18 17:48:10.09,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.000225067 seconds 10Sep18 17:48:10.30,N,spdqr.contig_bytes = 3344 10Sep18 17:48:10.53,N,Aquisition complete 10Sep18 17:48:10.64,D,Stats: samples = 3600004, write errors = 0 spqd errors = 0, time = 9e+02, measured rate = 3999.99 10Sep18 17:48:10.80,D,Drift: Before Sample = 0.00102496, After Sample = -0.000225067 10Sep18 17:48:10.92,D,Flush sizes: 10Sep18 17:48:10.99,D,[0]=1 10Sep18 17:48:11.06,D,[4096]=1757 10Sep18 17:48:11.12,D,Leaving sample_lowlevel normally 10Sep18 17:48:11.21,D,Leaving sample 10Sep18 17:49:10.48,N,glcheck: 380740 bytes free, 9 blocks free, 53308 bytes alloc, 3751 blocks alloc, 10Sep18 17:49:10.63,N,Open files 10Sep18 17:49:10.70,N, 0, 0x000435ee, main.c, 460 10Sep18 17:49:10.79,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:49:10.88,N,ARS>> # do PSD on 8 blocks (8*4096/5000 = 6.554 sec) psd chan=2 blocksize=4096 total_blocks=16 chan=2, infile=c:\r0033002.dat, outfile=c:\r0033002.psd 10Sep18 17:49:11.29,D,offset=0, blocksize=4096, total_blocks=16 10Sep18 17:50:10.58,N,glcheck: 380740 bytes free, 9 blocks free, 53308 bytes alloc, 3751 blocks alloc, 10Sep18 17:50:10.74,N,Starting assignments 10Sep18 17:50:11.07,N,stmp1 = inputfilename=c:\r0033002.dat 10Sep18 17:50:11.49,N,stmp1 = outputfilename=c:\r0033002.psd 10Sep18 17:50:11.91,N,stmp1 = channel=2 10Sep18 17:50:12.31,N,stmp1 = blocksize=4096 10Sep18 17:50:12.71,N,stmp1 = offset=0 10Sep18 17:50:13.10,N,stmp1 = total_blocks=16 10Sep18 17:50:13.18,N,ParameterObject dump: 10Sep18 17:50:13.26,N, 6 pairs found: 10Sep18 17:50:13.33,N, key: ->inputfilename<- value: ->c:\r0033002.dat<- 10Sep18 17:50:13.45,N, key: ->outputfilename<- value: ->c:\r0033002.psd<- 10Sep18 17:50:13.56,N, key: ->channel<- value: ->2<- 10Sep18 17:50:13.65,N, key: ->blocksize<- value: ->4096<- 10Sep18 17:50:13.74,N, key: ->offset<- value: ->0<- 10Sep18 17:50:13.83,N, key: ->total_blocks<- value: ->16<- 10Sep18 17:50:13.97,N,estimate_psd(): input file c:\r0033002.dat exists estimate_psd(): input file c:\r0033002.dat can be opened 10Sep18 17:50:14.19,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep18 17:50:32.60,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep18 17:50:46.48,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep18 17:50:46.69,N,close(): ASGFile not valid 10Sep18 17:50:46.79,N,retval = 0 10Sep18 17:51:46.63,N,glcheck: 380104 bytes free, 27 blocks free, 53368 bytes alloc, 3757 blocks alloc, 10Sep18 17:51:46.78,N,Open files 10Sep18 17:51:46.85,N, 0, 0x000435ee, main.c, 460 10Sep18 17:51:46.94,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:51:47.03,N,ARS>> # do one third octave on same data (go up to 2500Hz) # fc = 10^(34/10) = 2.512 kHz (2.239kHz to 2.818kHz) # NOTE: last band may not be filled since 2.5kHz is our max freq oto bandmax=34 bandmax=34, infile=c:\r0033002.psd, outfile=c:\r0033002.oto 10Sep18 17:52:47.15,N,glcheck: 380104 bytes free, 27 blocks free, 53368 bytes alloc, 3757 blocks alloc, 10Sep18 17:52:48.22,N,ParameterObject dump: 10Sep18 17:52:48.30,N, 3 pairs found: 10Sep18 17:52:48.37,N, key: ->inputfilename<- value: ->c:\r0033002.psd<- 10Sep18 17:52:48.48,N, key: ->outputfilename<- value: ->c:\r0033002.oto<- 10Sep18 17:52:48.59,N, key: ->bandmax<- value: ->34<- 10Sep18 17:52:48.69,N,starting the OTO synthesizer: .... 10Sep18 17:52:58.11,N,retval = 0 10Sep18 17:53:57.82,N,glcheck: 380096 bytes free, 22 blocks free, 53424 bytes alloc, 3760 blocks alloc, 10Sep18 17:53:57.98,N,Open files 10Sep18 17:53:58.05,N, 0, 0x000435ee, main.c, 460 10Sep18 17:53:58.14,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:53:58.23,N,ARS>> #repeat this cycle sleep time=60 type=0 time = 60, type = 0 10Sep18 17:53:58.41,H,ARS_OK 10Sep18 17:53:58.47,D,Entering LPStopUntil secs = 1284832438, sleeping until 1284832498 with 4 big sleeps... 10Sep18 17:53:58.63,D,Comm ports closed prior to sleeping 10Sep18 17:53:58.73,D,Console port cleared and RTS asserted low 10Sep18 17:53:58.83,D,pin 23 set high 10Sep18 17:53:58.90,D,pin 24 set low 10Sep18 17:53:58.97,D,pin 25 read 10Sep18 17:53:59.04,D,pin 26 mirrored (0) 10Sep18 17:53:59.26,D,pin 27 set low 10Sep18 17:53:59.33,D,pin 28 mirrored (0) 10Sep18 17:53:59.40,D,pin 29 set high 10Sep18 17:53:59.47,D,pin 31 set high 10Sep18 17:53:59.54,D,pin 32 mirrored (0) 10Sep18 17:53:59.62,D,pin 33 mirrored (0) 10Sep18 17:53:59.70,D,pin 34 mirrored (0) 10Sep18 17:53:59.77,D,pin 35 mirrored (0) 10Sep18 17:53:59.85,D,pin 36 mirrored (-1) 10Sep18 17:53:59.92,D,pin 37 mirrored (0) 10Sep18 17:54:00.00,D,pins are set for low power 10Sep18 17:54:00.09,D,interrupt handlers installed 10Sep18 17:54:00.17,D,serial drivers, CF and TPU states set 10Sep18 17:54:00.27,D,dog stroked 10Sep18 17:54:00.37,D,low speed set 10Sep18 17:54:00.91,D,PIT set 10Sep18 17:54:14.01,D,awake from big sleep, dog stroked 10Sep18 17:54:27.05,D,awake from big sleep, dog stroked 10Sep18 17:54:40.11,D,awake from big sleep, dog stroked 10Sep18 17:54:53.16,D,awake from big sleep, dog stroked 10Sep18 17:54:53.71,D,Entering LPStopUntil secs = 1284832493, sleeping until 1284832498 for remainder sleep... 10Sep18 17:54:59.36,D,done with sleeps, dog stroked 10Sep18 17:54:59.94,D,handlers and peripheral states restored 10Sep18 17:55:00.05,D,...exiting lpStopUntil normally 10Sep18 17:55:00.14,N,Open files 10Sep18 17:55:00.21,N, 0, 0x000435ee, main.c, 460 10Sep18 17:55:00.30,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:55:00.38,N,ARS>> loopLooping to top of file 10Sep18 17:55:00.62,N,Open files 10Sep18 17:55:00.69,N, 0, 0x000435ee, main.c, 460 10Sep18 17:55:00.78,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:55:00.87,N,ARS>> #ardive.ars #HIGH BAND: get samples for 20 sec @ 64000Hz sample time=60 chans=1 rate=64000 time=60, rate=64000, chans=1, syncclock=1, secondheader=0 10Sep18 17:56:00.71,N,glcheck: 380096 bytes free, 22 blocks free, 53424 bytes alloc, 3760 blocks alloc, 10Sep18 17:56:00.86,D,Entering sample for 60 secs, 64000 rate and 1 chans 10Sep18 17:56:00.97,N,Storing parameters... 10Sep18 17:56:01.20,N,Waiting for 20 second warmup 10Sep18 17:56:21.29,D,Entering sample_lowlevel 10Sep18 17:56:21.42,D,Free disk space = -164003840 10Sep18 17:56:21.50,N,Using PicoZOOM 10Sep18 17:56:21.67,N,Opened c:\r0033003.dat for data collection 10Sep18 17:56:21.77,D,Writing out header to c:\r0033003.dat 10Sep18 17:56:21.99,N,SPIIIDAQ initialized... 10Sep18 17:56:22.10,D,Current speed = 16000 kHz 10Sep18 17:56:22.18,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep18 17:56:22.31,N,DO NOT power cycle CF2 during aquisition!!! 10Sep18 17:56:26.20,N,SEASCAN: Date = 3913:17:56:28 10Sep18 17:56:28.00,D,SEASCAN: got sync 1284832588 42 10Sep18 17:56:28.08,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00105 seconds 10Sep18 17:57:31.63,N,SEASCAN: Date = 3913:17:57:34 10Sep18 17:57:33.99,D,SEASCAN: got sync 1284832653 39887 10Sep18 17:57:34.08,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00282502 seconds 10Sep18 17:57:34.29,N,spdqr.contig_bytes = 4128 10Sep18 17:57:34.50,N,Aquisition complete 10Sep18 17:57:34.58,D,Stats: samples = 3840012, write errors = 0 spqd errors = 0, time = 60, measured rate = 63999.67 10Sep18 17:57:34.75,D,Drift: Before Sample = 0.00105, After Sample = -0.00282502 10Sep18 17:57:34.87,D,Flush sizes: 10Sep18 17:57:34.94,D,[4096]=1866 10Sep18 17:57:35.01,D,[12288]=3 10Sep18 17:57:35.07,D,Leaving sample_lowlevel normally 10Sep18 17:57:35.16,D,Leaving sample 10Sep18 17:58:34.58,N,glcheck: 380384 bytes free, 10 blocks free, 53424 bytes alloc, 3760 blocks alloc, 10Sep18 17:58:34.74,N,Open files 10Sep18 17:58:34.81,N, 0, 0x000435ee, main.c, 460 10Sep18 17:58:34.90,N,pin = 5, pin err = 0, comm = 2 10Sep18 17:58:34.99,N,ARS>> # do psd on 1st 8 blocks (8*4096/64000 = .512sec of data) psd chan=1 blocksize=4096 total_blocks=16 chan=1, infile=c:\r0033003.dat, outfile=c:\r0033003.psd 10Sep18 17:58:35.27,D,offset=0, blocksize=4096, total_blocks=16 10Sep18 17:59:34.72,N,glcheck: 380384 bytes free, 10 blocks free, 53424 bytes alloc, 3760 blocks alloc, 10Sep18 17:59:34.88,N,Starting assignments 10Sep18 17:59:35.22,N,stmp1 = inputfilename=c:\r0033003.dat 10Sep18 17:59:35.64,N,stmp1 = outputfilename=c:\r0033003.psd 10Sep18 17:59:36.06,N,stmp1 = channel=1 10Sep18 17:59:36.59,N,stmp1 = blocksize=4096 10Sep18 17:59:36.99,N,stmp1 = offset=0 10Sep18 17:59:37.39,N,stmp1 = total_blocks=16 10Sep18 17:59:37.46,N,ParameterObject dump: 10Sep18 17:59:37.54,N, 6 pairs found: 10Sep18 17:59:37.61,N, key: ->inputfilename<- value: ->c:\r0033003.dat<- 10Sep18 17:59:37.72,N, key: ->outputfilename<- value: ->c:\r0033003.psd<- 10Sep18 17:59:37.83,N, key: ->channel<- value: ->1<- 10Sep18 17:59:37.93,N, key: ->blocksize<- value: ->4096<- 10Sep18 17:59:38.02,N, key: ->offset<- value: ->0<- 10Sep18 17:59:38.11,N, key: ->total_blocks<- value: ->16<- 10Sep18 17:59:38.25,N,estimate_psd(): input file c:\r0033003.dat exists estimate_psd(): input file c:\r0033003.dat can be opened 10Sep18 17:59:38.49,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep18 17:59:56.90,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep18 18:00:10.72,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep18 18:00:10.92,N,close(): ASGFile not valid 10Sep18 18:00:11.02,N,retval = 0 10Sep18 18:01:10.87,N,glcheck: 379800 bytes free, 25 blocks free, 53504 bytes alloc, 3766 blocks alloc, 10Sep18 18:01:11.02,N,Open files 10Sep18 18:01:11.09,N, 0, 0x000435ee, main.c, 460 10Sep18 18:01:11.18,N,pin = 5, pin err = 0, comm = 2 10Sep18 18:01:11.27,N,ARS>> # do one-third octave on same data (go up to 30kHz) # fc = 10^(45/10) = 31.623kHz (28.184kHz to 35.481kHz) # NOTE: last band may not be filled since 32kHz is our max freq oto bandmax=45 bandmax=45, infile=c:\r0033003.psd, outfile=c:\r0033003.oto 10Sep18 18:02:11.27,N,glcheck: 379800 bytes free, 25 blocks free, 53504 bytes alloc, 3766 blocks alloc, 10Sep18 18:02:12.33,N,ParameterObject dump: 10Sep18 18:02:12.52,N, 3 pairs found: 10Sep18 18:02:12.59,N, key: ->inputfilename<- value: ->c:\r0033003.psd<- 10Sep18 18:02:12.71,N, key: ->outputfilename<- value: ->c:\r0033003.oto<- 10Sep18 18:02:12.82,N, key: ->bandmax<- value: ->45<- 10Sep18 18:02:12.91,N,starting the OTO synthesizer: .... 10Sep18 18:02:22.08,N,retval = 0 10Sep18 18:03:21.88,N,glcheck: 379764 bytes free, 21 blocks free, 53564 bytes alloc, 3769 blocks alloc, 10Sep18 18:03:22.03,N,Open files 10Sep18 18:03:22.10,N, 0, 0x000435ee, main.c, 460 10Sep18 18:03:22.18,N,pin = 5, pin err = 0, comm = 2 10Sep18 18:03:22.32,N,ARS>> #LOW BAND: get samples for 30 sec @ 5000Hz sample time=900 chans=2 rate=4000 time=900, rate=4000, chans=2, syncclock=1, secondheader=0 10Sep18 18:04:22.17,N,glcheck: 379764 bytes free, 21 blocks free, 53564 bytes alloc, 3769 blocks alloc, 10Sep18 18:04:22.33,D,Entering sample for 900 secs, 4000 rate and 2 chans 10Sep18 18:04:22.44,N,Storing parameters... 10Sep18 18:04:22.67,N,Waiting for 20 second warmup 10Sep18 18:04:42.76,D,Entering sample_lowlevel 10Sep18 18:04:42.89,D,Free disk space = -171802624 10Sep18 18:04:42.98,N,Not using PicoZOOM 10Sep18 18:04:43.12,N,Opened c:\r0033004.dat for data collection 10Sep18 18:04:43.22,D,Writing out header to c:\r0033004.dat 10Sep18 18:04:43.56,N,SPIIIDAQ initialized... 10Sep18 18:04:43.70,D,Current speed = 16000 kHz 10Sep18 18:04:43.78,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep18 18:04:43.92,N,DO NOT power cycle CF2 during aquisition!!! 10Sep18 18:04:47.86,N,SEASCAN: Date = 3913:18:4:50 10Sep18 18:04:50.00,D,SEASCAN: got sync 1284833090 42 10Sep18 18:04:50.09,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00105 seconds 10Sep18 18:19:53.81,N,SEASCAN: Date = 3913:18:19:56 10Sep18 18:19:55.99,D,SEASCAN: got sync 1284833995 39984 10Sep18 18:19:56.09,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.000400066 seconds 10Sep18 18:19:56.31,N,spdqr.contig_bytes = 3344 10Sep18 18:19:56.53,N,Aquisition complete 10Sep18 18:19:56.65,D,Stats: samples = 3600004, write errors = 0 spqd errors = 0, time = 9e+02, measured rate = 3999.99 10Sep18 18:19:56.82,D,Drift: Before Sample = 0.00105, After Sample = -0.000400066 10Sep18 18:19:56.94,D,Flush sizes: 10Sep18 18:19:57.02,D,[0]=1 10Sep18 18:19:57.08,D,[4096]=1757 10Sep18 18:19:57.15,D,Leaving sample_lowlevel normally 10Sep18 18:19:57.25,D,Leaving sample 10Sep18 18:20:56.80,N,glcheck: 380052 bytes free, 9 blocks free, 53564 bytes alloc, 3769 blocks alloc, 10Sep18 18:20:56.96,N,Open files 10Sep18 18:20:57.03,N, 0, 0x000435ee, main.c, 460 10Sep18 18:20:57.12,N,pin = 5, pin err = 0, comm = 2 10Sep18 18:20:57.22,N,ARS>> # do PSD on 8 blocks (8*4096/5000 = 6.554 sec) psd chan=2 blocksize=4096 total_blocks=16 chan=2, infile=c:\r0033004.dat, outfile=c:\r0033004.psd 10Sep18 18:20:57.51,D,offset=0, blocksize=4096, total_blocks=16 10Sep18 18:21:57.22,N,glcheck: 380052 bytes free, 9 blocks free, 53564 bytes alloc, 3769 blocks alloc, 10Sep18 18:21:57.38,N,Starting assignments 10Sep18 18:21:57.73,N,stmp1 = inputfilename=c:\r0033004.dat 10Sep18 18:21:58.15,N,stmp1 = outputfilename=c:\r0033004.psd 10Sep18 18:21:58.57,N,stmp1 = channel=2 10Sep18 18:21:58.97,N,stmp1 = blocksize=4096 10Sep18 18:21:59.38,N,stmp1 = offset=0 10Sep18 18:21:59.78,N,stmp1 = total_blocks=16 10Sep18 18:21:59.86,N,ParameterObject dump: 10Sep18 18:21:59.95,N, 6 pairs found: 10Sep18 18:22:00.02,N, key: ->inputfilename<- value: ->c:\r0033004.dat<- 10Sep18 18:22:00.14,N, key: ->outputfilename<- value: ->c:\r0033004.psd<- 10Sep18 18:22:00.25,N, key: ->channel<- value: ->2<- 10Sep18 18:22:00.35,N, key: ->blocksize<- value: ->4096<- 10Sep18 18:22:00.45,N, key: ->offset<- value: ->0<- 10Sep18 18:22:00.54,N, key: ->total_blocks<- value: ->16<- 10Sep18 18:22:00.69,N,estimate_psd(): input file c:\r0033004.dat exists estimate_psd(): input file c:\r0033004.dat can be opened 10Sep18 18:22:00.93,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep18 18:22:19.36,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep18 18:22:33.26,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep18 18:22:33.46,N,close(): ASGFile not valid 10Sep18 18:22:33.57,N,retval = 0 10Sep18 18:23:33.70,N,glcheck: 379400 bytes free, 27 blocks free, 53640 bytes alloc, 3775 blocks alloc, 10Sep18 18:23:33.86,N,Open files 10Sep18 18:23:33.93,N, 0, 0x000435ee, main.c, 460 10Sep18 18:23:34.02,N,pin = 5, pin err = 0, comm = 2 10Sep18 18:23:34.11,N,ARS>> # do one third octave on same data (go up to 2500Hz) # fc = 10^(34/10) = 2.512 kHz (2.239kHz to 2.818kHz) # NOTE: last band may not be filled since 2.5kHz is our max freq oto bandmax=34 bandmax=34, infile=c:\r0033004.psd, outfile=c:\r0033004.oto 10Sep18 18:24:34.55,N,glcheck: 379400 bytes free, 27 blocks free, 53640 bytes alloc, 3775 blocks alloc, 10Sep18 18:24:35.61,N,ParameterObject dump: 10Sep18 18:24:35.70,N, 3 pairs found: 10Sep18 18:24:35.77,N, key: ->inputfilename<- value: ->c:\r0033004.psd<- 10Sep18 18:24:35.89,N, key: ->outputfilename<- value: ->c:\r0033004.oto<- 10Sep18 18:24:36.00,N, key: ->bandmax<- value: ->34<- 10Sep18 18:24:36.10,N,starting the OTO synthesizer: .... 10Sep18 18:24:45.27,N,retval = 0 10Sep18 18:25:45.34,N,glcheck: 379384 bytes free, 23 blocks free, 53680 bytes alloc, 3778 blocks alloc, 10Sep18 18:25:45.50,N,Open files 10Sep18 18:25:45.57,N, 0, 0x000435ee, main.c, 460 10Sep18 18:25:45.66,N,pin = 5, pin err = 0, comm = 2 10Sep18 18:25:45.75,N,ARS>> #repeat this cycle sleep time=60 type=0 time = 60, type = 0 10Sep18 18:25:45.95,H,ARS_OK 10Sep18 18:25:46.02,D,Entering LPStopUntil secs = 1284834346, sleeping until 1284834406 with 4 big sleeps... 10Sep18 18:25:46.18,D,Comm ports closed prior to sleeping 10Sep18 18:25:46.28,D,Console port cleared and RTS asserted low 10Sep18 18:25:46.38,D,pin 23 set high 10Sep18 18:25:46.46,D,pin 24 set low 10Sep18 18:25:46.53,D,pin 25 read 10Sep18 18:25:46.60,D,pin 26 mirrored (0) 10Sep18 18:25:46.82,D,pin 27 set low 10Sep18 18:25:46.89,D,pin 28 mirrored (0) 10Sep18 18:25:46.97,D,pin 29 set high 10Sep18 18:25:47.05,D,pin 31 set high 10Sep18 18:25:47.13,D,pin 32 mirrored (0) 10Sep18 18:25:47.21,D,pin 33 mirrored (0) 10Sep18 18:25:47.29,D,pin 34 mirrored (0) 10Sep18 18:25:47.37,D,pin 35 mirrored (0) 10Sep18 18:25:47.44,D,pin 36 mirrored (-1) 10Sep18 18:25:47.53,D,pin 37 mirrored (0) 10Sep18 18:25:47.61,D,pins are set for low power 10Sep18 18:25:47.69,D,interrupt handlers installed 10Sep18 18:25:47.78,D,serial drivers, CF and TPU states set 10Sep18 18:25:47.88,D,dog stroked 10Sep18 18:25:47.99,D,low speed set 10Sep18 18:25:48.55,D,PIT set 10Sep18 18:26:01.65,D,awake from big sleep, dog stroked 10Sep18 18:26:14.71,D,awake from big sleep, dog stroked 10Sep18 18:26:27.76,D,awake from big sleep, dog stroked 10Sep18 18:26:40.82,D,awake from big sleep, dog stroked 10Sep18 18:26:41.39,D,Entering LPStopUntil secs = 1284834401, sleeping until 1284834406 for remainder sleep... 10Sep18 18:26:47.07,D,done with sleeps, dog stroked 10Sep18 18:26:47.65,D,handlers and peripheral states restored 10Sep18 18:26:47.77,D,...exiting lpStopUntil normally 10Sep18 18:26:47.86,N,Open files 10Sep18 18:26:47.93,N, 0, 0x000435ee, main.c, 460 10Sep18 18:26:48.02,N,pin = 5, pin err = 0, comm = 2 10Sep18 18:26:48.11,N,ARS>> loopLooping to top of file 10Sep18 18:26:48.39,N,Open files 10Sep18 18:26:48.46,N, 0, 0x000435ee, main.c, 460 10Sep18 18:26:48.55,N,pin = 5, pin err = 0, comm = 2 10Sep18 18:26:48.64,N,ARS>> #ardive.ars #HIGH BAND: get samples for 20 sec @ 64000Hz sample time=60 chans=1 rate=64000 time=60, rate=64000, chans=1, syncclock=1, secondheader=0 10Sep18 18:27:48.80,N,glcheck: 379384 bytes free, 23 blocks free, 53680 bytes alloc, 3778 blocks alloc, 10Sep18 18:27:48.96,D,Entering sample for 60 secs, 64000 rate and 1 chans 10Sep18 18:27:49.08,N,Storing parameters... 10Sep18 18:27:49.30,N,Waiting for 20 second warmup 10Sep18 18:28:09.40,D,Entering sample_lowlevel 10Sep18 18:28:09.53,D,Free disk space = -179077120 10Sep18 18:28:09.62,N,Using PicoZOOM 10Sep18 18:28:09.79,N,Opened c:\r0033005.dat for data collection 10Sep18 18:28:09.90,D,Writing out header to c:\r0033005.dat 10Sep18 18:28:10.12,N,SPIIIDAQ initialized... 10Sep18 18:28:10.23,D,Current speed = 16000 kHz 10Sep18 18:28:10.31,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep18 18:28:10.44,N,DO NOT power cycle CF2 during aquisition!!! 10Sep18 18:28:13.75,N,SEASCAN: Date = 3913:18:28:16 10Sep18 18:28:16.00,D,SEASCAN: got sync 1284834496 41 10Sep18 18:28:16.08,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00102496 seconds 10Sep18 18:29:19.20,N,SEASCAN: Date = 3913:18:29:21 10Sep18 18:29:20.99,D,SEASCAN: got sync 1284834560 39889 10Sep18 18:29:21.08,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00277495 seconds 10Sep18 18:29:21.29,N,spdqr.contig_bytes = 4128 10Sep18 18:29:21.53,N,Aquisition complete 10Sep18 18:29:21.61,D,Stats: samples = 3840012, write errors = 0 spqd errors = 0, time = 60, measured rate = 63999.67 10Sep18 18:29:21.77,D,Drift: Before Sample = 0.00102496, After Sample = -0.00277495 10Sep18 18:29:21.90,D,Flush sizes: 10Sep18 18:29:21.98,D,[4096]=1866 10Sep18 18:29:22.05,D,[12288]=3 10Sep18 18:29:22.12,D,Leaving sample_lowlevel normally 10Sep18 18:29:22.21,D,Leaving sample 10Sep18 18:30:21.90,N,glcheck: 379720 bytes free, 9 blocks free, 53680 bytes alloc, 3778 blocks alloc, 10Sep18 18:30:22.06,N,Open files 10Sep18 18:30:22.13,N, 0, 0x000435ee, main.c, 460 10Sep18 18:30:22.23,N,pin = 5, pin err = 0, comm = 2 10Sep18 18:30:22.32,N,ARS>> # do psd on 1st 8 blocks (8*4096/64000 = .512sec of data) psd chan=1 blocksize=4096 total_blocks=16 chan=1, infile=c:\r0033005.dat, outfile=c:\r0033005.psd 10Sep18 18:30:22.62,D,offset=0, blocksize=4096, total_blocks=16 10Sep18 18:31:22.34,N,glcheck: 379720 bytes free, 9 blocks free, 53680 bytes alloc, 3778 blocks alloc, 10Sep18 18:31:22.64,N,Starting assignments 10Sep18 18:31:22.98,N,stmp1 = inputfilename=c:\r0033005.dat 10Sep18 18:31:23.41,N,stmp1 = outputfilename=c:\r0033005.psd 10Sep18 18:31:23.83,N,stmp1 = channel=1 10Sep18 18:31:24.23,N,stmp1 = blocksize=4096 10Sep18 18:31:24.64,N,stmp1 = offset=0 10Sep18 18:31:25.04,N,stmp1 = total_blocks=16 10Sep18 18:31:25.12,N,ParameterObject dump: 10Sep18 18:31:25.21,N, 6 pairs found: 10Sep18 18:31:25.28,N, key: ->inputfilename<- value: ->c:\r0033005.dat<- 10Sep18 18:31:25.40,N, key: ->outputfilename<- value: ->c:\r0033005.psd<- 10Sep18 18:31:25.51,N, key: ->channel<- value: ->1<- 10Sep18 18:31:25.61,N, key: ->blocksize<- value: ->4096<- 10Sep18 18:31:25.71,N, key: ->offset<- value: ->0<- 10Sep18 18:31:25.80,N, key: ->total_blocks<- value: ->16<- 10Sep18 18:31:25.95,N,estimate_psd(): input file c:\r0033005.dat exists estimate_psd(): input file c:\r0033005.dat can be opened 10Sep18 18:31:26.19,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep18 18:31:44.62,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep18 18:31:58.54,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep18 18:31:58.75,N,close(): ASGFile not valid 10Sep18 18:31:58.86,N,retval = 0 10Sep18 18:32:59.09,N,glcheck: 379100 bytes free, 25 blocks free, 53772 bytes alloc, 3784 blocks alloc, 10Sep18 18:32:59.25,N,Open files 10Sep18 18:32:59.32,N, 0, 0x000435ee, main.c, 460 10Sep18 18:32:59.42,N,pin = 5, pin err = 0, comm = 2 10Sep18 18:32:59.51,N,ARS>> # do one-third octave on same data (go up to 30kHz) # fc = 10^(45/10) = 31.623kHz (28.184kHz to 35.481kHz) # NOTE: last band may not be filled since 32kHz is our max freq oto bandmax=45 bandmax=45, infile=c:\r0033005.psd, outfile=c:\r0033005.oto 10Sep18 18:34:00.05,N,glcheck: 379100 bytes free, 25 blocks free, 53772 bytes alloc, 3784 blocks alloc, 10Sep18 18:34:01.12,N,ParameterObject dump: 10Sep18 18:34:01.20,N, 3 pairs found: 10Sep18 18:34:01.28,N, key: ->inputfilename<- value: ->c:\r0033005.psd<- 10Sep18 18:34:01.39,N, key: ->outputfilename<- value: ->c:\r0033005.oto<- 10Sep18 18:34:01.51,N, key: ->bandmax<- value: ->45<- 10Sep18 18:34:01.61,N,starting the OTO synthesizer: .... 10Sep18 18:34:10.79,N,retval = 0 10Sep18 18:35:11.02,N,glcheck: 379036 bytes free, 23 blocks free, 53812 bytes alloc, 3787 blocks alloc, 10Sep18 18:35:11.18,N,Open files 10Sep18 18:35:11.25,N, 0, 0x000435ee, main.c, 460 10Sep18 18:35:11.34,N,pin = 5, pin err = 0, comm = 2 10Sep18 18:35:11.43,N,ARS>> #LOW BAND: get samples for 30 sec @ 5000Hz sample time=900 chans=2 rate=4000 time=900, rate=4000, chans=2, syncclock=1, secondheader=0 10Sep18 18:36:11.69,N,glcheck: 379036 bytes free, 23 blocks free, 53812 bytes alloc, 3787 blocks alloc, 10Sep18 18:36:11.84,D,Entering sample for 900 secs, 4000 rate and 2 chans 10Sep18 18:36:11.96,N,Storing parameters... 10Sep18 18:36:12.18,N,Waiting for 20 second warmup 10Sep18 18:36:32.28,D,Entering sample_lowlevel 10Sep18 18:36:32.41,D,Free disk space = -186843136 10Sep18 18:36:32.50,N,Not using PicoZOOM 10Sep18 18:36:32.64,N,Opened c:\r0033006.dat for data collection 10Sep18 18:36:32.74,D,Writing out header to c:\r0033006.dat 10Sep18 18:36:33.13,N,SPIIIDAQ initialized... 10Sep18 18:36:33.25,D,Current speed = 16000 kHz 10Sep18 18:36:33.34,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep18 18:36:33.48,N,DO NOT power cycle CF2 during aquisition!!! 10Sep18 18:36:37.08,N,SEASCAN: Date = 3913:18:36:39 10Sep18 18:36:39.00,D,SEASCAN: got sync 1284834999 41 10Sep18 18:36:39.09,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00102496 seconds 10Sep18 18:51:43.05,N,SEASCAN: Date = 3913:18:51:45 10Sep18 18:51:44.99,D,SEASCAN: got sync 1284835904 39951 10Sep18 18:51:45.09,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00122499 seconds 10Sep18 18:51:45.30,N,spdqr.contig_bytes = 3344 10Sep18 18:51:45.54,N,Aquisition complete 10Sep18 18:51:45.63,D,Stats: samples = 3600004, write errors = 0 spqd errors = 0, time = 9e+02, measured rate = 3999.99 10Sep18 18:51:45.79,D,Drift: Before Sample = 0.00102496, After Sample = -0.00122499 10Sep18 18:51:45.92,D,Flush sizes: 10Sep18 18:51:45.99,D,[0]=1 10Sep18 18:51:46.06,D,[4096]=1757 10Sep18 18:51:46.13,D,Leaving sample_lowlevel normally 10Sep18 18:51:46.23,D,Leaving sample 10Sep18 18:52:46.09,N,glcheck: 379324 bytes free, 11 blocks free, 53812 bytes alloc, 3787 blocks alloc, 10Sep18 18:52:46.25,N,Open files 10Sep18 18:52:46.32,N, 0, 0x000435ee, main.c, 460 10Sep18 18:52:46.42,N,pin = 5, pin err = 0, comm = 2 10Sep18 18:52:46.51,N,ARS>> # do PSD on 8 blocks (8*4096/5000 = 6.554 sec) psd chan=2 blocksize=4096 total_blocks=16 chan=2, infile=c:\r0033006.dat, outfile=c:\r0033006.psd 10Sep18 18:52:46.91,D,offset=0, blocksize=4096, total_blocks=16 10Sep18 18:53:46.81,N,glcheck: 379324 bytes free, 11 blocks free, 53812 bytes alloc, 3787 blocks alloc, 10Sep18 18:53:46.97,N,Starting assignments 10Sep18 18:53:47.31,N,stmp1 = inputfilename=c:\r0033006.dat 10Sep18 18:53:47.73,N,stmp1 = outputfilename=c:\r0033006.psd 10Sep18 18:53:48.15,N,stmp1 = channel=2 10Sep18 18:53:48.56,N,stmp1 = blocksize=4096 10Sep18 18:53:48.96,N,stmp1 = offset=0 10Sep18 18:53:49.36,N,stmp1 = total_blocks=16 10Sep18 18:53:49.45,N,ParameterObject dump: 10Sep18 18:53:49.53,N, 6 pairs found: 10Sep18 18:53:49.61,N, key: ->inputfilename<- value: ->c:\r0033006.dat<- 10Sep18 18:53:49.72,N, key: ->outputfilename<- value: ->c:\r0033006.psd<- 10Sep18 18:53:49.84,N, key: ->channel<- value: ->2<- 10Sep18 18:53:49.93,N, key: ->blocksize<- value: ->4096<- 10Sep18 18:53:50.03,N, key: ->offset<- value: ->0<- 10Sep18 18:53:50.12,N, key: ->total_blocks<- value: ->16<- 10Sep18 18:53:50.27,N,estimate_psd(): input file c:\r0033006.dat exists estimate_psd(): input file c:\r0033006.dat can be opened 10Sep18 18:53:50.52,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep18 18:54:08.95,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep18 18:54:22.88,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep18 18:54:23.08,N,close(): ASGFile not valid 10Sep18 18:54:23.19,N,retval = 0 10Sep18 18:55:23.60,N,glcheck: 378704 bytes free, 27 blocks free, 53904 bytes alloc, 3793 blocks alloc, 10Sep18 18:55:23.76,N,Open files 10Sep18 18:55:23.83,N, 0, 0x000435ee, main.c, 460 10Sep18 18:55:23.92,N,pin = 5, pin err = 0, comm = 2 10Sep18 18:55:24.01,N,ARS>> # do one third octave on same data (go up to 2500Hz) # fc = 10^(34/10) = 2.512 kHz (2.239kHz to 2.818kHz) # NOTE: last band may not be filled since 2.5kHz is our max freq oto bandmax=34 bandmax=34, infile=c:\r0033006.psd, outfile=c:\r0033006.oto 10Sep18 18:56:24.73,N,glcheck: 378704 bytes free, 27 blocks free, 53904 bytes alloc, 3793 blocks alloc, 10Sep18 18:56:25.80,N,ParameterObject dump: 10Sep18 18:56:25.88,N, 3 pairs found: 10Sep18 18:56:25.96,N, key: ->inputfilename<- value: ->c:\r0033006.psd<- 10Sep18 18:56:26.07,N, key: ->outputfilename<- value: ->c:\r0033006.oto<- 10Sep18 18:56:26.19,N, key: ->bandmax<- value: ->34<- 10Sep18 18:56:26.28,N,starting the OTO synthesizer: .... 10Sep18 18:56:35.45,N,retval = 0 10Sep18 18:57:35.83,N,glcheck: 378616 bytes free, 25 blocks free, 53968 bytes alloc, 3796 blocks alloc, 10Sep18 18:57:35.99,N,Open files 10Sep18 18:57:36.06,N, 0, 0x000435ee, main.c, 460 10Sep18 18:57:36.15,N,pin = 5, pin err = 0, comm = 2 10Sep18 18:57:36.24,N,ARS>> #repeat this cycle sleep time=60 type=0 time = 60, type = 0 10Sep18 18:57:36.44,H,ARS_OK 10Sep18 18:57:36.51,D,Entering LPStopUntil secs = 1284836256, sleeping until 1284836316 with 4 big sleeps... 10Sep18 18:57:36.67,D,Comm ports closed prior to sleeping 10Sep18 18:57:36.77,D,Console port cleared and RTS asserted low 10Sep18 18:57:36.88,D,pin 23 set high 10Sep18 18:57:36.95,D,pin 24 set low 10Sep18 18:57:37.14,D,pin 25 read 10Sep18 18:57:37.21,D,pin 26 mirrored (0) 10Sep18 18:57:37.29,D,pin 27 set low 10Sep18 18:57:37.36,D,pin 28 mirrored (0) 10Sep18 18:57:37.44,D,pin 29 set high 10Sep18 18:57:37.52,D,pin 31 set high 10Sep18 18:57:37.59,D,pin 32 mirrored (0) 10Sep18 18:57:37.67,D,pin 33 mirrored (0) 10Sep18 18:57:37.75,D,pin 34 mirrored (0) 10Sep18 18:57:37.84,D,pin 35 mirrored (0) 10Sep18 18:57:37.92,D,pin 36 mirrored (-1) 10Sep18 18:57:38.00,D,pin 37 mirrored (0) 10Sep18 18:57:38.08,D,pins are set for low power 10Sep18 18:57:38.16,D,interrupt handlers installed 10Sep18 18:57:38.25,D,serial drivers, CF and TPU states set 10Sep18 18:57:38.35,D,dog stroked 10Sep18 18:57:38.46,D,low speed set 10Sep18 18:57:39.02,D,PIT set 10Sep18 18:57:52.12,D,awake from big sleep, dog stroked 10Sep18 18:58:05.18,D,awake from big sleep, dog stroked 10Sep18 18:58:18.25,D,awake from big sleep, dog stroked 10Sep18 18:58:31.29,D,awake from big sleep, dog stroked 10Sep18 18:58:31.86,D,Entering LPStopUntil secs = 1284836311, sleeping until 1284836316 for remainder sleep... 10Sep18 18:58:37.54,D,done with sleeps, dog stroked 10Sep18 18:58:38.12,D,handlers and peripheral states restored 10Sep18 18:58:38.24,D,...exiting lpStopUntil normally 10Sep18 18:58:38.33,N,Open files 10Sep18 18:58:38.40,N, 0, 0x000435ee, main.c, 460 10Sep18 18:58:38.49,N,pin = 5, pin err = 0, comm = 2 10Sep18 18:58:38.70,N,ARS>> loopLooping to top of file 10Sep18 18:58:38.83,N,Open files 10Sep18 18:58:38.90,N, 0, 0x000435ee, main.c, 460 10Sep18 18:58:39.00,N,pin = 5, pin err = 0, comm = 2 10Sep18 18:58:39.09,N,ARS>> #ardive.ars #HIGH BAND: get samples for 20 sec @ 64000Hz sample time=60 chans=1 rate=64000 time=60, rate=64000, chans=1, syncclock=1, secondheader=0 10Sep18 18:59:39.56,N,glcheck: 378616 bytes free, 25 blocks free, 53968 bytes alloc, 3796 blocks alloc, 10Sep18 18:59:39.72,D,Entering sample for 60 secs, 64000 rate and 1 chans 10Sep18 18:59:39.84,N,Storing parameters... 10Sep18 18:59:40.07,N,Waiting for 20 second warmup 10Sep18 19:00:00.16,D,Entering sample_lowlevel 10Sep18 19:00:00.30,D,Free disk space = -194117632 10Sep18 19:00:00.39,N,Using PicoZOOM 10Sep18 19:00:00.56,N,Opened c:\r0033007.dat for data collection 10Sep18 19:00:00.66,D,Writing out header to c:\r0033007.dat 10Sep18 19:00:00.91,N,SPIIIDAQ initialized... 10Sep18 19:00:01.07,D,Current speed = 16000 kHz 10Sep18 19:00:01.15,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep18 19:00:01.28,N,DO NOT power cycle CF2 during aquisition!!! 10Sep18 19:00:04.67,N,SEASCAN: Date = 3913:19:0:7 10Sep18 19:00:07.00,D,SEASCAN: got sync 1284836407 41 10Sep18 19:00:07.09,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00102496 seconds 10Sep18 19:01:10.11,N,SEASCAN: Date = 3913:19:1:12 10Sep18 19:01:11.99,D,SEASCAN: got sync 1284836471 39891 10Sep18 19:01:12.08,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00272489 seconds 10Sep18 19:01:12.29,N,spdqr.contig_bytes = 4128 10Sep18 19:01:12.50,N,Aquisition complete 10Sep18 19:01:12.58,D,Stats: samples = 3840012, write errors = 0 spqd errors = 0, time = 60, measured rate = 63999.69 10Sep18 19:01:12.75,D,Drift: Before Sample = 0.00102496, After Sample = -0.00272489 10Sep18 19:01:12.88,D,Flush sizes: 10Sep18 19:01:12.95,D,[4096]=1863 10Sep18 19:01:13.02,D,[8192]=1 10Sep18 19:01:13.09,D,[12288]=2 10Sep18 19:01:13.16,D,[16384]=1 10Sep18 19:01:13.23,D,Leaving sample_lowlevel normally 10Sep18 19:01:13.33,D,Leaving sample 10Sep18 19:02:13.20,N,glcheck: 379000 bytes free, 9 blocks free, 53968 bytes alloc, 3796 blocks alloc, 10Sep18 19:02:13.36,N,Open files 10Sep18 19:02:13.43,N, 0, 0x000435ee, main.c, 460 10Sep18 19:02:13.53,N,pin = 5, pin err = 0, comm = 2 10Sep18 19:02:13.62,N,ARS>> # do psd on 1st 8 blocks (8*4096/64000 = .512sec of data) psd chan=1 blocksize=4096 total_blocks=16 chan=1, infile=c:\r0033007.dat, outfile=c:\r0033007.psd 10Sep18 19:02:13.92,D,offset=0, blocksize=4096, total_blocks=16 10Sep18 19:03:13.82,N,glcheck: 379000 bytes free, 9 blocks free, 53968 bytes alloc, 3796 blocks alloc, 10Sep18 19:03:13.98,N,Starting assignments 10Sep18 19:03:14.46,N,stmp1 = inputfilename=c:\r0033007.dat 10Sep18 19:03:14.89,N,stmp1 = outputfilename=c:\r0033007.psd 10Sep18 19:03:15.31,N,stmp1 = channel=1 10Sep18 19:03:15.71,N,stmp1 = blocksize=4096 10Sep18 19:03:16.12,N,stmp1 = offset=0 10Sep18 19:03:16.52,N,stmp1 = total_blocks=16 10Sep18 19:03:16.60,N,ParameterObject dump: 10Sep18 19:03:16.69,N, 6 pairs found: 10Sep18 19:03:16.76,N, key: ->inputfilename<- value: ->c:\r0033007.dat<- 10Sep18 19:03:16.88,N, key: ->outputfilename<- value: ->c:\r0033007.psd<- 10Sep18 19:03:16.99,N, key: ->channel<- value: ->1<- 10Sep18 19:03:17.09,N, key: ->blocksize<- value: ->4096<- 10Sep18 19:03:17.19,N, key: ->offset<- value: ->0<- 10Sep18 19:03:17.28,N, key: ->total_blocks<- value: ->16<- 10Sep18 19:03:17.43,N,estimate_psd(): input file c:\r0033007.dat exists estimate_psd(): input file c:\r0033007.dat can be opened 10Sep18 19:03:17.68,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep18 19:03:36.11,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep18 19:03:50.04,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep18 19:03:50.24,N,close(): ASGFile not valid 10Sep18 19:03:50.34,N,retval = 0 10Sep18 19:04:50.75,N,glcheck: 378404 bytes free, 24 blocks free, 54060 bytes alloc, 3802 blocks alloc, 10Sep18 19:04:50.91,N,Open files 10Sep18 19:04:50.98,N, 0, 0x000435ee, main.c, 460 10Sep18 19:04:51.07,N,pin = 5, pin err = 0, comm = 2 10Sep18 19:04:51.16,N,ARS>> # do one-third octave on same data (go up to 30kHz) # fc = 10^(45/10) = 31.623kHz (28.184kHz to 35.481kHz) # NOTE: last band may not be filled since 32kHz is our max freq oto bandmax=45 bandmax=45, infile=c:\r0033007.psd, outfile=c:\r0033007.oto 10Sep18 19:05:51.88,N,glcheck: 378404 bytes free, 24 blocks free, 54060 bytes alloc, 3802 blocks alloc, 10Sep18 19:05:52.95,N,ParameterObject dump: 10Sep18 19:05:53.03,N, 3 pairs found: 10Sep18 19:05:53.10,N, key: ->inputfilename<- value: ->c:\r0033007.psd<- 10Sep18 19:05:53.22,N, key: ->outputfilename<- value: ->c:\r0033007.oto<- 10Sep18 19:05:53.34,N, key: ->bandmax<- value: ->45<- 10Sep18 19:05:53.43,N,starting the OTO synthesizer: .... 10Sep18 19:06:02.61,N,retval = 0 10Sep18 19:07:02.97,N,glcheck: 378316 bytes free, 22 blocks free, 54124 bytes alloc, 3805 blocks alloc, 10Sep18 19:07:03.13,N,Open files 10Sep18 19:07:03.20,N, 0, 0x000435ee, main.c, 460 10Sep18 19:07:03.30,N,pin = 5, pin err = 0, comm = 2 10Sep18 19:07:03.39,N,ARS>> #LOW BAND: get samples for 30 sec @ 5000Hz sample time=900 chans=2 rate=4000 Entering Host Listen State... 10Sep18 19:07:03.63,H,ARS_OK 10Sep18 19:07:03.70,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:07:03.79,N,ARS>> ARS_OK 10Sep18 19:07:03.89,H,ARS_OK 10Sep18 19:07:03.97,N,diveapogee 10Sep18 19:07:04.05,H,ARS_OK 10Sep18 19:07:04.13,N,Executing script [C:\ARAPOGEE.ARS] 10Sep18 19:07:04.22,N,Open files 10Sep18 19:07:04.30,N, 0, 0x000435ee, main.c, 1464 10Sep18 19:07:04.52,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:07:04.61,N,Open files 10Sep18 19:07:04.68,N, 0, 0x000435ee, main.c, 1464 10Sep18 19:07:04.78,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:07:04.87,N,ARS>> #arapogee.ars movefiles thisdive=1 maxbytes=0 10Sep18 19:07:06.29,D,Files to copy 10Sep18 19:07:06.36,D,0000 - [R0033001.DAT] 10Sep18 19:07:06.44,D,0001 - [R0033002.DAT] 10Sep18 19:07:06.53,D,0002 - [R0033003.DAT] 10Sep18 19:07:06.61,D,0003 - [R0033004.DAT] 10Sep18 19:07:06.69,D,0004 - [R0033005.DAT] 10Sep18 19:07:06.77,D,0005 - [R0033006.DAT] 10Sep18 19:07:06.85,D,0006 - [R0033007.DAT] 10Sep18 19:07:06.94,D,Powering up BI... 10Sep18 19:07:10.99,N,power_up_bi = 1 10Sep18 19:07:11.07,D,Dive num = 33, file = R0033001.DAT 10Sep18 19:07:12.95,N,power_up_bi = 2 10Sep18 19:07:13.06,D,Opening d:\dive0033\R0033001.DAT for writing 10Sep18 19:07:13.18,D,Opening R0033001.DAT for reading 10Sep18 19:07:13.28,N,Writing file d:\dive0033\R0033001.DAT...done. 7688192 bytes 0.280750.2 secs 27384474.000000.2 bytes/sec 10Sep18 19:07:25.69,N,power_down_bi = 1 10Sep18 19:07:25.77,N,Removing file R0033001.DAT...done. 10Sep18 19:07:28.81,D,Dive num = 33, file = R0033002.DAT 10Sep18 19:07:29.02,N,power_up_bi = 2 10Sep18 19:07:29.27,D,Opening d:\dive0033\R0033002.DAT for writing 10Sep18 19:07:29.39,D,Opening R0033002.DAT for reading 10Sep18 19:07:29.49,N,Writing file d:\dive0033\R0033002.DAT...done. 7204864 bytes -0.484625.2 secs -14866882.000000.2 bytes/sec 10Sep18 19:07:41.14,N,power_down_bi = 1 10Sep18 19:07:41.22,N,Removing file R0033002.DAT...done. 10Sep18 19:07:43.91,D,Dive num = 33, file = R0033003.DAT 10Sep18 19:07:44.13,N,power_up_bi = 2 10Sep18 19:07:44.24,D,Opening d:\dive0033\R0033003.DAT for writing 10Sep18 19:07:44.36,D,Opening R0033003.DAT for reading 10Sep18 19:07:44.47,N,Writing file d:\dive0033\R0033003.DAT...done. 7684128 bytes 0.324400.2 secs 23687204.000000.2 bytes/sec 10Sep18 19:07:56.92,N,power_down_bi = 1 10Sep18 19:07:57.13,N,Removing file R0033003.DAT...done. 10Sep18 19:08:00.10,D,Dive num = 33, file = R0033004.DAT 10Sep18 19:08:00.30,N,power_up_bi = 2 10Sep18 19:08:00.42,D,Opening d:\dive0033\R0033004.DAT for writing 10Sep18 19:08:00.54,D,Opening R0033004.DAT for reading 10Sep18 19:08:00.64,N,Writing file d:\dive0033\R0033004.DAT...done. 7204864 bytes -0.447650.2 secs -16094861.000000.2 bytes/sec 10Sep18 19:08:12.34,N,power_down_bi = 1 10Sep18 19:08:12.42,N,Removing file R0033004.DAT...done. 10Sep18 19:08:15.30,D,Dive num = 33, file = R0033005.DAT 10Sep18 19:08:15.65,N,power_up_bi = 2 10Sep18 19:08:15.77,D,Opening d:\dive0033\R0033005.DAT for writing 10Sep18 19:08:15.89,D,Opening R0033005.DAT for reading 10Sep18 19:08:15.99,N,Writing file d:\dive0033\R0033005.DAT...done. 7684128 bytes -0.714225.2 secs -10758693.000000.2 bytes/sec 10Sep18 19:08:28.41,N,power_down_bi = 1 10Sep18 19:08:28.49,N,Removing file R0033005.DAT...done. 10Sep18 19:08:31.51,D,Dive num = 33, file = R0033006.DAT 10Sep18 19:08:31.73,N,power_up_bi = 2 10Sep18 19:08:31.84,D,Opening d:\dive0033\R0033006.DAT for writing 10Sep18 19:08:31.96,D,Opening R0033006.DAT for reading 10Sep18 19:08:32.07,N,Writing file d:\dive0033\R0033006.DAT...done. 7204864 bytes 0.507200.2 secs 14205173.000000.2 bytes/sec 10Sep18 19:08:43.71,N,power_down_bi = 1 10Sep18 19:08:43.78,N,Removing file R0033006.DAT...done. 10Sep18 19:08:46.87,D,Dive num = 33, file = R0033007.DAT 10Sep18 19:08:47.09,N,power_up_bi = 2 10Sep18 19:08:47.20,D,Opening d:\dive0033\R0033007.DAT for writing 10Sep18 19:08:47.33,D,Opening R0033007.DAT for reading 10Sep18 19:08:47.43,N,Writing file d:\dive0033\R0033007.DAT...done. 7684128 bytes 128.316849.2 secs 59884.015625.2 bytes/sec 10Sep18 19:08:59.88,N,power_down_bi = 1 10Sep18 19:08:59.96,N,Removing file R0033007.DAT...done. 10Sep18 19:09:03.45,D,Powering down BI... 10Sep18 19:09:03.88,N,power_down_bi = 0 10Sep18 19:09:04.07,N,Open files 10Sep18 19:09:04.14,N, 0, 0x000435ee, main.c, 1464 10Sep18 19:09:04.24,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:09:04.33,N,ARS>> autoAuto state 10Sep18 19:09:04.45,N,Open files 10Sep18 19:09:04.52,N, 0, 0x000435ee, main.c, 1464 10Sep18 19:09:04.62,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:09:04.71,N,Finished with script [C:\ARAPOGEE.ARS] 10Sep18 19:09:04.81,N,Auto state 10Sep18 19:09:04.88,N,Entering Auto State... 10Sep18 19:09:04.96,H,ARS_OK 10Sep18 19:09:05.15,N,Open files 10Sep18 19:09:05.22,N, 0, 0x000435ee, main.c, 460 10Sep18 19:09:05.32,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:09:05.41,N,ARS>> #ardive.ars #HIGH BAND: get samples for 20 sec @ 64000Hz sample time=60 chans=1 rate=64000 time=60, rate=64000, chans=1, syncclock=1, secondheader=0 10Sep18 19:10:05.80,N,glcheck: 378436 bytes free, 17 blocks free, 54124 bytes alloc, 3805 blocks alloc, 10Sep18 19:10:05.96,D,Entering sample for 60 secs, 64000 rate and 1 chans 10Sep18 19:10:06.08,N,Storing parameters... 10Sep18 19:10:06.31,N,Waiting for 20 second warmup 10Sep18 19:10:26.40,D,Entering sample_lowlevel 10Sep18 19:10:26.54,D,Free disk space = -149454848 10Sep18 19:10:26.63,N,Using PicoZOOM 10Sep18 19:10:26.80,N,Opened c:\r0033008.dat for data collection 10Sep18 19:10:26.90,D,Writing out header to c:\r0033008.dat 10Sep18 19:10:27.14,N,SPIIIDAQ initialized... 10Sep18 19:10:27.23,D,Current speed = 16000 kHz 10Sep18 19:10:27.31,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep18 19:10:27.44,N,DO NOT power cycle CF2 during aquisition!!! 10Sep18 19:10:30.47,N,SEASCAN: Date = 3913:19:10:33 10Sep18 19:10:33.00,D,SEASCAN: got sync 1284837033 42 10Sep18 19:10:33.08,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00105 seconds 10Sep18 19:11:35.90,N,SEASCAN: Date = 3913:19:11:38 10Sep18 19:11:37.99,D,SEASCAN: got sync 1284837097 39885 10Sep18 19:11:38.08,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00287509 seconds 10Sep18 19:11:38.29,N,spdqr.contig_bytes = 1360 10Sep18 19:11:38.54,N,Aquisition complete 10Sep18 19:11:38.62,D,Stats: samples = 3840676, write errors = 0 spqd errors = 0, time = 60, measured rate = 63999.75 10Sep18 19:11:38.86,D,Drift: Before Sample = 0.00105, After Sample = -0.00287509 10Sep18 19:11:38.99,D,Flush sizes: 10Sep18 19:11:39.06,D,[0]=1 10Sep18 19:11:39.12,D,[4096]=1864 10Sep18 19:11:39.19,D,[8192]=1 10Sep18 19:11:39.26,D,[12288]=3 10Sep18 19:11:39.33,D,Leaving sample_lowlevel normally 10Sep18 19:11:39.42,D,Leaving sample 10Sep18 19:12:39.54,N,glcheck: 378628 bytes free, 9 blocks free, 54124 bytes alloc, 3805 blocks alloc, 10Sep18 19:12:39.70,N,Open files 10Sep18 19:12:39.77,N, 0, 0x000435ee, main.c, 460 10Sep18 19:12:39.87,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:12:39.96,N,ARS>> # do psd on 1st 8 blocks (8*4096/64000 = .512sec of data) psd chan=1 blocksize=4096 total_blocks=16 chan=1, infile=c:\r0033008.dat, outfile=c:\r0033008.psd 10Sep18 19:12:40.26,D,offset=0, blocksize=4096, total_blocks=16 10Sep18 19:13:40.40,N,glcheck: 378628 bytes free, 9 blocks free, 54124 bytes alloc, 3805 blocks alloc, 10Sep18 19:13:40.56,N,Starting assignments 10Sep18 19:13:41.04,N,stmp1 = inputfilename=c:\r0033008.dat 10Sep18 19:13:41.47,N,stmp1 = outputfilename=c:\r0033008.psd 10Sep18 19:13:41.89,N,stmp1 = channel=1 10Sep18 19:13:42.29,N,stmp1 = blocksize=4096 10Sep18 19:13:42.70,N,stmp1 = offset=0 10Sep18 19:13:43.10,N,stmp1 = total_blocks=16 10Sep18 19:13:43.18,N,ParameterObject dump: 10Sep18 19:13:43.27,N, 6 pairs found: 10Sep18 19:13:43.34,N, key: ->inputfilename<- value: ->c:\r0033008.dat<- 10Sep18 19:13:43.46,N, key: ->outputfilename<- value: ->c:\r0033008.psd<- 10Sep18 19:13:43.58,N, key: ->channel<- value: ->1<- 10Sep18 19:13:43.67,N, key: ->blocksize<- value: ->4096<- 10Sep18 19:13:43.77,N, key: ->offset<- value: ->0<- 10Sep18 19:13:43.86,N, key: ->total_blocks<- value: ->16<- 10Sep18 19:13:44.00,N,estimate_psd(): input file c:\r0033008.dat exists estimate_psd(): input file c:\r0033008.dat can be opened 10Sep18 19:13:44.23,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep18 19:14:02.65,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep18 19:14:16.58,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep18 19:14:16.78,N,close(): ASGFile not valid 10Sep18 19:14:16.89,N,retval = 0 10Sep18 19:15:17.53,N,glcheck: 378032 bytes free, 24 blocks free, 54216 bytes alloc, 3811 blocks alloc, 10Sep18 19:15:17.69,N,Open files 10Sep18 19:15:17.76,N, 0, 0x000435ee, main.c, 460 10Sep18 19:15:17.86,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:15:17.95,N,ARS>> # do one-third octave on same data (go up to 30kHz) # fc = 10^(45/10) = 31.623kHz (28.184kHz to 35.481kHz) # NOTE: last band may not be filled since 32kHz is our max freq oto bandmax=45 bandmax=45, infile=c:\r0033008.psd, outfile=c:\r0033008.oto 10Sep18 19:16:18.91,N,glcheck: 378032 bytes free, 24 blocks free, 54216 bytes alloc, 3811 blocks alloc, 10Sep18 19:16:19.98,N,ParameterObject dump: 10Sep18 19:16:20.06,N, 3 pairs found: 10Sep18 19:16:20.14,N, key: ->inputfilename<- value: ->c:\r0033008.psd<- 10Sep18 19:16:20.25,N, key: ->outputfilename<- value: ->c:\r0033008.oto<- 10Sep18 19:16:20.37,N, key: ->bandmax<- value: ->45<- 10Sep18 19:16:20.46,N,starting the OTO synthesizer: .... 10Sep18 19:16:29.62,N,retval = 0 10Sep18 19:17:30.26,N,glcheck: 377944 bytes free, 22 blocks free, 54280 bytes alloc, 3814 blocks alloc, 10Sep18 19:17:30.42,N,Open files 10Sep18 19:17:30.49,N, 0, 0x000435ee, main.c, 460 10Sep18 19:17:30.58,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:17:30.68,N,ARS>> #LOW BAND: get samples for 30 sec @ 5000Hz sample time=900 chans=2 rate=4000 time=900, rate=4000, chans=2, syncclock=1, secondheader=0 10Sep18 19:18:31.34,N,glcheck: 377944 bytes free, 22 blocks free, 54280 bytes alloc, 3814 blocks alloc, 10Sep18 19:18:31.50,D,Entering sample for 900 secs, 4000 rate and 2 chans 10Sep18 19:18:31.62,N,Storing parameters... 10Sep18 19:18:31.84,N,Waiting for 20 second warmup 10Sep18 19:18:51.94,D,Entering sample_lowlevel 10Sep18 19:18:52.07,D,Free disk space = -157253632 10Sep18 19:18:52.16,N,Not using PicoZOOM 10Sep18 19:18:52.30,N,Opened c:\r0033009.dat for data collection 10Sep18 19:18:52.40,D,Writing out header to c:\r0033009.dat 10Sep18 19:18:52.76,N,SPIIIDAQ initialized... 10Sep18 19:18:52.85,D,Current speed = 16000 kHz 10Sep18 19:18:52.94,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep18 19:18:53.08,N,DO NOT power cycle CF2 during aquisition!!! 10Sep18 19:18:57.16,N,SEASCAN: Date = 3913:19:18:59 10Sep18 19:18:59.00,D,SEASCAN: got sync 1284837539 42 10Sep18 19:18:59.09,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00105 seconds 10Sep18 19:34:03.12,N,SEASCAN: Date = 3913:19:34:5 10Sep18 19:34:04.99,D,SEASCAN: got sync 1284838444 39886 10Sep18 19:34:05.09,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00285006 seconds 10Sep18 19:34:05.30,N,spdqr.contig_bytes = 3344 10Sep18 19:34:05.58,N,Aquisition complete 10Sep18 19:34:05.66,D,Stats: samples = 3600004, write errors = 0 spqd errors = 0, time = 9e+02, measured rate = 3999.99 10Sep18 19:34:05.83,D,Drift: Before Sample = 0.00105, After Sample = -0.00285006 10Sep18 19:34:05.95,D,Flush sizes: 10Sep18 19:34:06.03,D,[0]=1 10Sep18 19:34:06.09,D,[4096]=1757 10Sep18 19:34:06.16,D,Leaving sample_lowlevel normally 10Sep18 19:34:06.26,D,Leaving sample 10Sep18 19:35:06.53,N,glcheck: 378232 bytes free, 10 blocks free, 54280 bytes alloc, 3814 blocks alloc, 10Sep18 19:35:06.69,N,Open files 10Sep18 19:35:06.76,N, 0, 0x000435ee, main.c, 460 10Sep18 19:35:06.86,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:35:06.95,N,ARS>> # do PSD on 8 blocks (8*4096/5000 = 6.554 sec) psd chan=2 blocksize=4096 total_blocks=16 chan=2, infile=c:\r0033009.dat, outfile=c:\r0033009.psd 10Sep18 19:35:07.37,D,offset=0, blocksize=4096, total_blocks=16 10Sep18 19:36:07.68,N,glcheck: 378232 bytes free, 10 blocks free, 54280 bytes alloc, 3814 blocks alloc, 10Sep18 19:36:07.84,N,Starting assignments 10Sep18 19:36:08.18,N,stmp1 = inputfilename=c:\r0033009.dat 10Sep18 19:36:08.60,N,stmp1 = outputfilename=c:\r0033009.psd 10Sep18 19:36:09.03,N,stmp1 = channel=2 10Sep18 19:36:09.43,N,stmp1 = blocksize=4096 10Sep18 19:36:09.84,N,stmp1 = offset=0 10Sep18 19:36:10.24,N,stmp1 = total_blocks=16 10Sep18 19:36:10.32,N,ParameterObject dump: 10Sep18 19:36:10.40,N, 6 pairs found: 10Sep18 19:36:10.48,N, key: ->inputfilename<- value: ->c:\r0033009.dat<- 10Sep18 19:36:10.59,N, key: ->outputfilename<- value: ->c:\r0033009.psd<- 10Sep18 19:36:10.71,N, key: ->channel<- value: ->2<- 10Sep18 19:36:10.81,N, key: ->blocksize<- value: ->4096<- 10Sep18 19:36:10.91,N, key: ->offset<- value: ->0<- 10Sep18 19:36:11.00,N, key: ->total_blocks<- value: ->16<- 10Sep18 19:36:11.15,N,estimate_psd(): input file c:\r0033009.dat exists estimate_psd(): input file c:\r0033009.dat can be opened 10Sep18 19:36:11.39,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep18 19:36:29.82,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep18 19:36:43.69,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep18 19:36:43.90,N,close(): ASGFile not valid 10Sep18 19:36:44.00,N,retval = 0 10Sep18 19:37:44.82,N,glcheck: 377612 bytes free, 26 blocks free, 54372 bytes alloc, 3820 blocks alloc, 10Sep18 19:37:44.98,N,Open files 10Sep18 19:37:45.05,N, 0, 0x000435ee, main.c, 460 10Sep18 19:37:45.15,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:37:45.24,N,ARS>> # do one third octave on same data (go up to 2500Hz) # fc = 10^(34/10) = 2.512 kHz (2.239kHz to 2.818kHz) # NOTE: last band may not be filled since 2.5kHz is our max freq oto bandmax=34 bandmax=34, infile=c:\r0033009.psd, outfile=c:\r0033009.oto 10Sep18 19:38:46.36,N,glcheck: 377612 bytes free, 26 blocks free, 54372 bytes alloc, 3820 blocks alloc, 10Sep18 19:38:47.43,N,ParameterObject dump: 10Sep18 19:38:47.52,N, 3 pairs found: 10Sep18 19:38:47.59,N, key: ->inputfilename<- value: ->c:\r0033009.psd<- 10Sep18 19:38:47.71,N, key: ->outputfilename<- value: ->c:\r0033009.oto<- 10Sep18 19:38:47.82,N, key: ->bandmax<- value: ->34<- 10Sep18 19:38:47.92,N,starting the OTO synthesizer: .... 10Sep18 19:38:57.07,N,retval = 0 10Sep18 19:39:57.85,N,glcheck: 377524 bytes free, 24 blocks free, 54436 bytes alloc, 3823 blocks alloc, 10Sep18 19:39:58.01,N,Open files 10Sep18 19:39:58.08,N, 0, 0x000435ee, main.c, 460 10Sep18 19:39:58.17,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:39:58.26,N,ARS>> #repeat this cycle sleep time=60 type=0 time = 60, type = 0 10Sep18 19:39:58.46,H,ARS_OK 10Sep18 19:39:58.53,D,Entering LPStopUntil secs = 1284838798, sleeping until 1284838858 with 4 big sleeps... 10Sep18 19:39:58.70,D,Comm ports closed prior to sleeping 10Sep18 19:39:58.80,D,Console port cleared and RTS asserted low 10Sep18 19:39:58.90,D,pin 23 set high 10Sep18 19:39:58.97,D,pin 24 set low 10Sep18 19:39:59.16,D,pin 25 read 10Sep18 19:39:59.23,D,pin 26 mirrored (0) 10Sep18 19:39:59.31,D,pin 27 set low 10Sep18 19:39:59.39,D,pin 28 mirrored (0) 10Sep18 19:39:59.47,D,pin 29 set high 10Sep18 19:39:59.54,D,pin 31 set high 10Sep18 19:39:59.62,D,pin 32 mirrored (0) 10Sep18 19:39:59.70,D,pin 33 mirrored (0) 10Sep18 19:39:59.78,D,pin 34 mirrored (0) 10Sep18 19:39:59.86,D,pin 35 mirrored (0) 10Sep18 19:39:59.94,D,pin 36 mirrored (-1) 10Sep18 19:40:00.02,D,pin 37 mirrored (0) 10Sep18 19:40:00.10,D,pins are set for low power 10Sep18 19:40:00.19,D,interrupt handlers installed 10Sep18 19:40:00.28,D,serial drivers, CF and TPU states set 10Sep18 19:40:00.38,D,dog stroked 10Sep18 19:40:00.49,D,low speed set 10Sep18 19:40:01.05,D,PIT set 10Sep18 19:40:14.15,D,awake from big sleep, dog stroked 10Sep18 19:40:27.20,D,awake from big sleep, dog stroked 10Sep18 19:40:40.26,D,awake from big sleep, dog stroked 10Sep18 19:40:53.32,D,awake from big sleep, dog stroked 10Sep18 19:40:53.89,D,Entering LPStopUntil secs = 1284838853, sleeping until 1284838858 for remainder sleep... 10Sep18 19:40:59.56,D,done with sleeps, dog stroked 10Sep18 19:41:00.17,D,handlers and peripheral states restored 10Sep18 19:41:00.29,D,...exiting lpStopUntil normally 10Sep18 19:41:00.38,N,Open files 10Sep18 19:41:00.45,N, 0, 0x000435ee, main.c, 460 10Sep18 19:41:00.54,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:41:00.74,N,ARS>> loopLooping to top of file 10Sep18 19:41:00.88,N,Open files 10Sep18 19:41:00.95,N, 0, 0x000435ee, main.c, 460 10Sep18 19:41:01.04,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:41:01.13,N,ARS>> #ardive.ars #HIGH BAND: get samples for 20 sec @ 64000Hz sample time=60 chans=1 rate=64000 time=60, rate=64000, chans=1, syncclock=1, secondheader=0 10Sep18 19:42:02.02,N,glcheck: 377524 bytes free, 24 blocks free, 54436 bytes alloc, 3823 blocks alloc, 10Sep18 19:42:02.18,D,Entering sample for 60 secs, 64000 rate and 1 chans 10Sep18 19:42:02.29,N,Storing parameters... 10Sep18 19:42:02.52,N,Waiting for 20 second warmup 10Sep18 19:42:22.62,D,Entering sample_lowlevel 10Sep18 19:42:22.75,D,Free disk space = -164528128 10Sep18 19:42:22.84,N,Using PicoZOOM 10Sep18 19:42:23.01,N,Opened c:\r0033010.dat for data collection 10Sep18 19:42:23.12,D,Writing out header to c:\r0033010.dat 10Sep18 19:42:23.36,N,SPIIIDAQ initialized... 10Sep18 19:42:23.47,D,Current speed = 16000 kHz 10Sep18 19:42:23.55,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep18 19:42:23.68,N,DO NOT power cycle CF2 during aquisition!!! 10Sep18 19:42:26.40,N,SEASCAN: Date = 3913:19:42:29 10Sep18 19:42:29.00,D,SEASCAN: got sync 1284838949 42 10Sep18 19:42:29.09,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00105 seconds 10Sep18 19:43:31.85,N,SEASCAN: Date = 3913:19:43:34 10Sep18 19:43:33.99,D,SEASCAN: got sync 1284839013 39887 10Sep18 19:43:34.08,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00282502 seconds 10Sep18 19:43:34.29,N,spdqr.contig_bytes = 1360 10Sep18 19:43:34.52,N,Aquisition complete 10Sep18 19:43:34.60,D,Stats: samples = 3840676, write errors = 0 spqd errors = 0, time = 60, measured rate = 63999.75 10Sep18 19:43:34.77,D,Drift: Before Sample = 0.00105, After Sample = -0.00282502 10Sep18 19:43:34.90,D,Flush sizes: 10Sep18 19:43:34.97,D,[0]=1 10Sep18 19:43:35.03,D,[4096]=1865 10Sep18 19:43:35.11,D,[12288]=2 10Sep18 19:43:35.18,D,[16384]=1 10Sep18 19:43:35.25,D,Leaving sample_lowlevel normally 10Sep18 19:43:35.34,D,Leaving sample 10Sep18 19:44:35.74,N,glcheck: 377884 bytes free, 9 blocks free, 54436 bytes alloc, 3823 blocks alloc, 10Sep18 19:44:35.90,N,Open files 10Sep18 19:44:35.97,N, 0, 0x000435ee, main.c, 460 10Sep18 19:44:36.06,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:44:36.16,N,ARS>> # do psd on 1st 8 blocks (8*4096/64000 = .512sec of data) psd chan=1 blocksize=4096 total_blocks=16 chan=1, infile=c:\r0033010.dat, outfile=c:\r0033010.psd 10Sep18 19:44:36.46,D,offset=0, blocksize=4096, total_blocks=16 10Sep18 19:45:36.89,N,glcheck: 377884 bytes free, 9 blocks free, 54436 bytes alloc, 3823 blocks alloc, 10Sep18 19:45:37.16,N,Starting assignments 10Sep18 19:45:37.50,N,stmp1 = inputfilename=c:\r0033010.dat 10Sep18 19:45:37.92,N,stmp1 = outputfilename=c:\r0033010.psd 10Sep18 19:45:38.35,N,stmp1 = channel=1 10Sep18 19:45:38.75,N,stmp1 = blocksize=4096 10Sep18 19:45:39.16,N,stmp1 = offset=0 10Sep18 19:45:39.56,N,stmp1 = total_blocks=16 10Sep18 19:45:39.64,N,ParameterObject dump: 10Sep18 19:45:39.73,N, 6 pairs found: 10Sep18 19:45:39.80,N, key: ->inputfilename<- value: ->c:\r0033010.dat<- 10Sep18 19:45:39.92,N, key: ->outputfilename<- value: ->c:\r0033010.psd<- 10Sep18 19:45:40.03,N, key: ->channel<- value: ->1<- 10Sep18 19:45:40.13,N, key: ->blocksize<- value: ->4096<- 10Sep18 19:45:40.23,N, key: ->offset<- value: ->0<- 10Sep18 19:45:40.32,N, key: ->total_blocks<- value: ->16<- 10Sep18 19:45:40.47,N,estimate_psd(): input file c:\r0033010.dat exists estimate_psd(): input file c:\r0033010.dat can be opened 10Sep18 19:45:40.71,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep18 19:45:59.15,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep18 19:46:13.08,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep18 19:46:13.29,N,close(): ASGFile not valid 10Sep18 19:46:13.39,N,retval = 0 10Sep18 19:47:14.32,N,glcheck: 377288 bytes free, 24 blocks free, 54528 bytes alloc, 3829 blocks alloc, 10Sep18 19:47:14.48,N,Open files 10Sep18 19:47:14.55,N, 0, 0x000435ee, main.c, 460 10Sep18 19:47:14.65,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:47:14.74,N,ARS>> # do one-third octave on same data (go up to 30kHz) # fc = 10^(45/10) = 31.623kHz (28.184kHz to 35.481kHz) # NOTE: last band may not be filled since 32kHz is our max freq oto bandmax=45 bandmax=45, infile=c:\r0033010.psd, outfile=c:\r0033010.oto 10Sep18 19:48:15.97,N,glcheck: 377288 bytes free, 24 blocks free, 54528 bytes alloc, 3829 blocks alloc, 10Sep18 19:48:17.05,N,ParameterObject dump: 10Sep18 19:48:17.13,N, 3 pairs found: 10Sep18 19:48:17.20,N, key: ->inputfilename<- value: ->c:\r0033010.psd<- 10Sep18 19:48:17.32,N, key: ->outputfilename<- value: ->c:\r0033010.oto<- 10Sep18 19:48:17.51,N, key: ->bandmax<- value: ->45<- 10Sep18 19:48:17.64,N,starting the OTO synthesizer: .... 10Sep18 19:48:26.87,N,retval = 0 10Sep18 19:49:27.72,N,glcheck: 377200 bytes free, 22 blocks free, 54592 bytes alloc, 3832 blocks alloc, 10Sep18 19:49:27.88,N,Open files 10Sep18 19:49:27.95,N, 0, 0x000435ee, main.c, 460 10Sep18 19:49:28.05,N,pin = 6, pin err = 0, comm = 2 10Sep18 19:49:28.14,N,ARS>> #LOW BAND: get samples for 30 sec @ 5000Hz sample time=900 chans=2 rate=4000 time=900, rate=4000, chans=2, syncclock=1, secondheader=0 10Sep18 19:50:29.09,N,glcheck: 377200 bytes free, 22 blocks free, 54592 bytes alloc, 3832 blocks alloc, 10Sep18 19:50:29.25,D,Entering sample for 900 secs, 4000 rate and 2 chans 10Sep18 19:50:29.37,N,Storing parameters... 10Sep18 19:50:29.59,N,Waiting for 20 second warmup 10Sep18 19:50:49.69,D,Entering sample_lowlevel 10Sep18 19:50:49.82,D,Free disk space = -172294144 10Sep18 19:50:49.91,N,Not using PicoZOOM 10Sep18 19:50:50.05,N,Opened c:\r0033011.dat for data collection 10Sep18 19:50:50.15,D,Writing out header to c:\r0033011.dat 10Sep18 19:50:50.50,N,SPIIIDAQ initialized... 10Sep18 19:50:50.59,D,Current speed = 16000 kHz 10Sep18 19:50:50.68,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep18 19:50:50.82,N,DO NOT power cycle CF2 during aquisition!!! 10Sep18 19:50:54.79,N,SEASCAN: Date = 3913:19:50:57 10Sep18 19:50:57.00,D,SEASCAN: got sync 1284839457 41 10Sep18 19:50:57.09,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00102496 seconds 10Sep18 20:06:00.73,N,SEASCAN: Date = 3913:20:6:3 10Sep18 20:06:02.99,D,SEASCAN: got sync 1284840362 39874 10Sep18 20:06:03.09,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00314999 seconds 10Sep18 20:06:03.30,N,spdqr.contig_bytes = 3344 10Sep18 20:06:03.51,N,Aquisition complete 10Sep18 20:06:03.60,D,Stats: samples = 3600004, write errors = 0 spqd errors = 0, time = 9e+02, measured rate = 3999.99 10Sep18 20:06:03.77,D,Drift: Before Sample = 0.00102496, After Sample = -0.00314999 10Sep18 20:06:03.90,D,Flush sizes: 10Sep18 20:06:03.97,D,[0]=1 10Sep18 20:06:04.03,D,[4096]=1757 10Sep18 20:06:04.11,D,Leaving sample_lowlevel normally 10Sep18 20:06:04.20,D,Leaving sample 10Sep18 20:07:04.66,N,glcheck: 377488 bytes free, 10 blocks free, 54592 bytes alloc, 3832 blocks alloc, 10Sep18 20:07:04.82,N,Open files 10Sep18 20:07:04.89,N, 0, 0x000435ee, main.c, 460 10Sep18 20:07:04.98,N,pin = 6, pin err = 0, comm = 2 10Sep18 20:07:05.07,N,ARS>> # do PSD on 8 blocks (8*4096/5000 = 6.554 sec) psd chan=2 blocksize=4096 total_blocks=16 chan=2, infile=c:\r0033011.dat, outfile=c:\r0033011.psd 10Sep18 20:07:05.50,D,offset=0, blocksize=4096, total_blocks=16 10Sep18 20:08:05.98,N,glcheck: 377488 bytes free, 10 blocks free, 54592 bytes alloc, 3832 blocks alloc, 10Sep18 20:08:06.15,N,Starting assignments 10Sep18 20:08:06.49,N,stmp1 = inputfilename=c:\r0033011.dat 10Sep18 20:08:06.91,N,stmp1 = outputfilename=c:\r0033011.psd 10Sep18 20:08:07.33,N,stmp1 = channel=2 10Sep18 20:08:07.74,N,stmp1 = blocksize=4096 10Sep18 20:08:08.15,N,stmp1 = offset=0 10Sep18 20:08:08.55,N,stmp1 = total_blocks=16 10Sep18 20:08:08.63,N,ParameterObject dump: 10Sep18 20:08:08.71,N, 6 pairs found: 10Sep18 20:08:08.79,N, key: ->inputfilename<- value: ->c:\r0033011.dat<- 10Sep18 20:08:08.90,N, key: ->outputfilename<- value: ->c:\r0033011.psd<- 10Sep18 20:08:09.02,N, key: ->channel<- value: ->2<- 10Sep18 20:08:09.11,N, key: ->blocksize<- value: ->4096<- 10Sep18 20:08:09.21,N, key: ->offset<- value: ->0<- 10Sep18 20:08:09.31,N, key: ->total_blocks<- value: ->16<- 10Sep18 20:08:09.46,N,estimate_psd(): input file c:\r0033011.dat exists estimate_psd(): input file c:\r0033011.dat can be opened 10Sep18 20:08:09.70,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep18 20:08:28.14,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep18 20:08:42.12,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep18 20:08:42.33,N,close(): ASGFile not valid 10Sep18 20:08:42.43,N,retval = 0 10Sep18 20:09:43.43,N,glcheck: 376868 bytes free, 26 blocks free, 54684 bytes alloc, 3838 blocks alloc, 10Sep18 20:09:43.59,N,Open files 10Sep18 20:09:43.66,N, 0, 0x000435ee, main.c, 460 10Sep18 20:09:43.75,N,pin = 6, pin err = 0, comm = 2 10Sep18 20:09:43.85,N,ARS>> # do one third octave on same data (go up to 2500Hz) # fc = 10^(34/10) = 2.512 kHz (2.239kHz to 2.818kHz) # NOTE: last band may not be filled since 2.5kHz is our max freq oto bandmax=34 bandmax=34, infile=c:\r0033011.psd, outfile=c:\r0033011.oto 10Sep18 20:10:45.20,N,glcheck: 376868 bytes free, 26 blocks free, 54684 bytes alloc, 3838 blocks alloc, 10Sep18 20:10:46.28,N,ParameterObject dump: 10Sep18 20:10:46.36,N, 3 pairs found: 10Sep18 20:10:46.44,N, key: ->inputfilename<- value: ->c:\r0033011.psd<- 10Sep18 20:10:46.55,N, key: ->outputfilename<- value: ->c:\r0033011.oto<- 10Sep18 20:10:46.67,N, key: ->bandmax<- value: ->34<- 10Sep18 20:10:46.76,N,starting the OTO synthesizer: .... 10Sep18 20:10:55.94,N,retval = 0 10Sep18 20:11:57.02,N,glcheck: 376780 bytes free, 24 blocks free, 54748 bytes alloc, 3841 blocks alloc, 10Sep18 20:11:57.18,N,Open files 10Sep18 20:11:57.25,N, 0, 0x000435ee, main.c, 460 10Sep18 20:11:57.34,N,pin = 6, pin err = 0, comm = 2 10Sep18 20:11:57.43,N,ARS>> #repeat this cycle sleep time=60 type=0 time = 60, type = 0 10Sep18 20:11:57.62,H,ARS_OK 10Sep18 20:11:57.69,D,Entering LPStopUntil secs = 1284840717, sleeping until 1284840777 with 4 big sleeps... 10Sep18 20:11:57.86,D,Comm ports closed prior to sleeping 10Sep18 20:11:57.96,D,Console port cleared and RTS asserted low 10Sep18 20:11:58.06,D,pin 23 set high 10Sep18 20:11:58.25,D,pin 24 set low 10Sep18 20:11:58.32,D,pin 25 read 10Sep18 20:11:58.39,D,pin 26 mirrored (0) 10Sep18 20:11:58.47,D,pin 27 set low 10Sep18 20:11:58.55,D,pin 28 mirrored (0) 10Sep18 20:11:58.63,D,pin 29 set high 10Sep18 20:11:58.70,D,pin 31 set high 10Sep18 20:11:58.78,D,pin 32 mirrored (0) 10Sep18 20:11:58.86,D,pin 33 mirrored (0) 10Sep18 20:11:58.94,D,pin 34 mirrored (0) 10Sep18 20:11:59.02,D,pin 35 mirrored (0) 10Sep18 20:11:59.10,D,pin 36 mirrored (-1) 10Sep18 20:11:59.18,D,pin 37 mirrored (0) 10Sep18 20:11:59.26,D,pins are set for low power 10Sep18 20:11:59.35,D,interrupt handlers installed 10Sep18 20:11:59.44,D,serial drivers, CF and TPU states set 10Sep18 20:11:59.54,D,dog stroked 10Sep18 20:11:59.65,D,low speed set 10Sep18 20:12:00.23,D,PIT set 10Sep18 20:12:13.33,D,awake from big sleep, dog stroked 10Sep18 20:12:26.39,D,awake from big sleep, dog stroked 10Sep18 20:12:39.44,D,awake from big sleep, dog stroked 10Sep18 20:12:52.51,D,awake from big sleep, dog stroked 10Sep18 20:12:53.10,D,Entering LPStopUntil secs = 1284840773, sleeping until 1284840777 for remainder sleep... 10Sep18 20:12:57.77,D,done with sleeps, dog stroked 10Sep18 20:12:58.38,D,handlers and peripheral states restored 10Sep18 20:12:58.49,D,...exiting lpStopUntil normally 10Sep18 20:12:58.59,N,Open files 10Sep18 20:12:58.66,N, 0, 0x000435ee, main.c, 460 10Sep18 20:12:58.86,N,pin = 6, pin err = 0, comm = 2 10Sep18 20:12:58.96,N,ARS>> loopLooping to top of file 10Sep18 20:12:59.09,N,Open files 10Sep18 20:12:59.16,N, 0, 0x000435ee, main.c, 460 10Sep18 20:12:59.26,N,pin = 6, pin err = 0, comm = 2 10Sep18 20:12:59.35,N,ARS>> #ardive.ars #HIGH BAND: get samples for 20 sec @ 64000Hz sample time=60 chans=1 rate=64000 time=60, rate=64000, chans=1, syncclock=1, secondheader=0 10Sep18 20:14:00.51,N,glcheck: 376780 bytes free, 24 blocks free, 54748 bytes alloc, 3841 blocks alloc, 10Sep18 20:14:00.67,D,Entering sample for 60 secs, 64000 rate and 1 chans 10Sep18 20:14:00.79,N,Storing parameters... 10Sep18 20:14:01.01,N,Waiting for 20 second warmup 10Sep18 20:14:21.11,D,Entering sample_lowlevel 10Sep18 20:14:21.24,D,Free disk space = -179568640 10Sep18 20:14:21.33,N,Using PicoZOOM 10Sep18 20:14:21.50,N,Opened c:\r0033012.dat for data collection 10Sep18 20:14:21.61,D,Writing out header to c:\r0033012.dat 10Sep18 20:14:21.86,N,SPIIIDAQ initialized... 10Sep18 20:14:22.01,D,Current speed = 16000 kHz 10Sep18 20:14:22.09,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep18 20:14:22.23,N,DO NOT power cycle CF2 during aquisition!!! 10Sep18 20:14:25.71,N,SEASCAN: Date = 3913:20:14:28 10Sep18 20:14:28.00,D,SEASCAN: got sync 1284840868 42 10Sep18 20:14:28.08,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00105 seconds 10Sep18 20:15:31.16,N,SEASCAN: Date = 3913:20:15:33 10Sep18 20:15:32.99,D,SEASCAN: got sync 1284840932 39886 10Sep18 20:15:33.08,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00285006 seconds 10Sep18 20:15:33.29,N,spdqr.contig_bytes = 1360 10Sep18 20:15:33.50,N,Aquisition complete 10Sep18 20:15:33.58,D,Stats: samples = 3840676, write errors = 0 spqd errors = 0, time = 60, measured rate = 63999.72 10Sep18 20:15:33.75,D,Drift: Before Sample = 0.00105, After Sample = -0.00285006 10Sep18 20:15:33.88,D,Flush sizes: 10Sep18 20:15:33.95,D,[0]=1 10Sep18 20:15:34.02,D,[4096]=1866 10Sep18 20:15:34.09,D,[8192]=1 10Sep18 20:15:34.16,D,[12288]=1 10Sep18 20:15:34.23,D,[16384]=1 10Sep18 20:15:34.30,D,Leaving sample_lowlevel normally 10Sep18 20:15:34.39,D,Leaving sample 10Sep18 20:16:35.08,N,glcheck: 377140 bytes free, 9 blocks free, 54748 bytes alloc, 3841 blocks alloc, 10Sep18 20:16:35.24,N,Open files 10Sep18 20:16:35.31,N, 0, 0x000435ee, main.c, 460 10Sep18 20:16:35.54,N,pin = 6, pin err = 0, comm = 2 10Sep18 20:16:35.63,N,ARS>> # do psd on 1st 8 blocks (8*4096/64000 = .512sec of data) psd chan=1 blocksize=4096 total_blocks=16 chan=1, infile=c:\r0033012.dat, outfile=c:\r0033012.psd 10Sep18 20:16:35.93,D,offset=0, blocksize=4096, total_blocks=16 10Sep18 20:17:36.65,N,glcheck: 377140 bytes free, 9 blocks free, 54748 bytes alloc, 3841 blocks alloc, 10Sep18 20:17:36.81,N,Starting assignments 10Sep18 20:17:37.15,N,stmp1 = inputfilename=c:\r0033012.dat 10Sep18 20:17:37.58,N,stmp1 = outputfilename=c:\r0033012.psd 10Sep18 20:17:38.00,N,stmp1 = channel=1 10Sep18 20:17:38.40,N,stmp1 = blocksize=4096 10Sep18 20:17:38.81,N,stmp1 = offset=0 10Sep18 20:17:39.22,N,stmp1 = total_blocks=16 10Sep18 20:17:39.30,N,ParameterObject dump: 10Sep18 20:17:39.38,N, 6 pairs found: 10Sep18 20:17:39.46,N, key: ->inputfilename<- value: ->c:\r0033012.dat<- 10Sep18 20:17:39.58,N, key: ->outputfilename<- value: ->c:\r0033012.psd<- 10Sep18 20:17:39.69,N, key: ->channel<- value: ->1<- 10Sep18 20:17:39.79,N, key: ->blocksize<- value: ->4096<- 10Sep18 20:17:39.89,N, key: ->offset<- value: ->0<- 10Sep18 20:17:39.98,N, key: ->total_blocks<- value: ->16<- 10Sep18 20:17:40.13,N,estimate_psd(): input file c:\r0033012.dat exists estimate_psd(): input file c:\r0033012.dat can be opened 10Sep18 20:17:40.38,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep18 20:17:58.95,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep18 20:18:12.73,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep18 20:18:12.94,N,close(): ASGFile not valid 10Sep18 20:18:13.04,N,retval = 0 10Sep18 20:19:14.26,N,glcheck: 376544 bytes free, 24 blocks free, 54840 bytes alloc, 3847 blocks alloc, 10Sep18 20:19:14.53,N,Open files 10Sep18 20:19:14.60,N, 0, 0x000435ee, main.c, 460 10Sep18 20:19:14.69,N,pin = 6, pin err = 0, comm = 2 10Sep18 20:19:14.79,N,ARS>> # do one-third octave on same data (go up to 30kHz) # fc = 10^(45/10) = 31.623kHz (28.184kHz to 35.481kHz) # NOTE: last band may not be filled since 32kHz is our max freq oto bandmax=45 bandmax=45, infile=c:\r0033012.psd, outfile=c:\r0033012.oto 10Sep18 20:20:16.17,N,glcheck: 376544 bytes free, 24 blocks free, 54840 bytes alloc, 3847 blocks alloc, 10Sep18 20:20:17.24,N,ParameterObject dump: 10Sep18 20:20:17.33,N, 3 pairs found: 10Sep18 20:20:17.40,N, key: ->inputfilename<- value: ->c:\r0033012.psd<- 10Sep18 20:20:17.52,N, key: ->outputfilename<- value: ->c:\r0033012.oto<- 10Sep18 20:20:17.63,N, key: ->bandmax<- value: ->45<- 10Sep18 20:20:17.73,N,starting the OTO synthesizer: .... 10Sep18 20:20:26.90,N,retval = 0 10Sep18 20:21:28.11,N,glcheck: 376456 bytes free, 22 blocks free, 54904 bytes alloc, 3850 blocks alloc, 10Sep18 20:21:28.27,N,Open files 10Sep18 20:21:28.34,N, 0, 0x000435ee, main.c, 460 10Sep18 20:21:28.43,N,pin = 6, pin err = 0, comm = 2 10Sep18 20:21:28.52,N,ARS>> #LOW BAND: get samples for 30 sec @ 5000Hz sample time=900 chans=2 rate=4000 time=900, rate=4000, chans=2, syncclock=1, secondheader=0 10Sep18 20:22:29.75,N,glcheck: 376456 bytes free, 22 blocks free, 54904 bytes alloc, 3850 blocks alloc, 10Sep18 20:22:30.03,D,Entering sample for 900 secs, 4000 rate and 2 chans 10Sep18 20:22:30.14,N,Storing parameters... 10Sep18 20:22:30.37,N,Waiting for 20 second warmup 10Sep18 20:22:50.46,D,Entering sample_lowlevel 10Sep18 20:22:50.59,D,Free disk space = -187334656 10Sep18 20:22:50.68,N,Not using PicoZOOM 10Sep18 20:22:50.82,N,Opened c:\r0033013.dat for data collection 10Sep18 20:22:50.92,D,Writing out header to c:\r0033013.dat 10Sep18 20:22:51.18,N,SPIIIDAQ initialized... 10Sep18 20:22:51.28,D,Current speed = 16000 kHz 10Sep18 20:22:51.36,N,SPIIIDAQ starting to aquire right after clock set - press . to quit aquiring 10Sep18 20:22:51.50,N,DO NOT power cycle CF2 during aquisition!!! 10Sep18 20:22:54.08,N,SEASCAN: Date = 3913:20:22:56 10Sep18 20:22:56.00,D,SEASCAN: got sync 1284841376 42 10Sep18 20:22:56.09,N,SESSCAN: clock diff (CF2 - SEASCAN): 0.00105 seconds 10Sep18 20:38:00.04,N,SEASCAN: Date = 3913:20:38:2 10Sep18 20:38:01.99,D,SEASCAN: got sync 1284842281 39936 10Sep18 20:38:02.09,N,SESSCAN: clock diff (CF2 - SEASCAN): -0.00160003 seconds 10Sep18 20:38:02.31,N,spdqr.contig_bytes = 3344 10Sep18 20:38:02.54,N,Aquisition complete 10Sep18 20:38:02.63,D,Stats: samples = 3600004, write errors = 0 spqd errors = 0, time = 9e+02, measured rate = 3999.99 10Sep18 20:38:02.80,D,Drift: Before Sample = 0.00105, After Sample = -0.00160003 10Sep18 20:38:02.92,D,Flush sizes: 10Sep18 20:38:02.99,D,[0]=1 10Sep18 20:38:03.06,D,[4096]=1757 10Sep18 20:38:03.27,D,Leaving sample_lowlevel normally 10Sep18 20:38:03.36,D,Leaving sample 10Sep18 20:39:04.20,N,glcheck: 376744 bytes free, 10 blocks free, 54904 bytes alloc, 3850 blocks alloc, 10Sep18 20:39:04.36,N,Open files 10Sep18 20:39:04.43,N, 0, 0x000435ee, main.c, 460 10Sep18 20:39:04.52,N,pin = 6, pin err = 0, comm = 2 10Sep18 20:39:04.62,N,ARS>> # do PSD on 8 blocks (8*4096/5000 = 6.554 sec) psd chan=2 blocksize=4096 total_blocks=16 chan=2, infile=c:\r0033013.dat, outfile=c:\r0033013.psd 10Sep18 20:39:04.96,D,offset=0, blocksize=4096, total_blocks=16 10Sep18 20:40:05.84,N,glcheck: 376744 bytes free, 10 blocks free, 54904 bytes alloc, 3850 blocks alloc, 10Sep18 20:40:06.00,N,Starting assignments 10Sep18 20:40:06.35,N,stmp1 = inputfilename=c:\r0033013.dat 10Sep18 20:40:06.77,N,stmp1 = outputfilename=c:\r0033013.psd 10Sep18 20:40:07.20,N,stmp1 = channel=2 10Sep18 20:40:07.61,N,stmp1 = blocksize=4096 10Sep18 20:40:08.02,N,stmp1 = offset=0 10Sep18 20:40:08.42,N,stmp1 = total_blocks=16 10Sep18 20:40:08.51,N,ParameterObject dump: 10Sep18 20:40:08.60,N, 6 pairs found: 10Sep18 20:40:08.68,N, key: ->inputfilename<- value: ->c:\r0033013.dat<- 10Sep18 20:40:08.79,N, key: ->outputfilename<- value: ->c:\r0033013.psd<- 10Sep18 20:40:08.91,N, key: ->channel<- value: ->2<- 10Sep18 20:40:09.01,N, key: ->blocksize<- value: ->4096<- 10Sep18 20:40:09.11,N, key: ->offset<- value: ->0<- 10Sep18 20:40:09.21,N, key: ->total_blocks<- value: ->16<- 10Sep18 20:40:09.36,N,estimate_psd(): input file c:\r0033013.dat exists estimate_psd(): input file c:\r0033013.dat can be opened 10Sep18 20:40:09.76,N,Data file version is 04 Version 3 header Data file version is 04 Version 3 header 10Sep18 20:40:28.21,D,final offset = 4104 bytes ASGFile:fseek: retval = 0000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 ASGFile:fread: retval = 2000 Data file version is 04 Version 3 header close(): ASGFile not valid glfree: NULL pointer passed in from file kiss_fft.c, linenum 379 10Sep18 20:40:42.13,N,glfree: NULL pointer passed in from file kiss_fft.c, linenum 382 10Sep18 20:40:42.34,N,close(): ASGFile not valid 10Sep18 20:40:42.45,N,retval = 0 10Sep18 20:41:43.84,N,glcheck: 376124 bytes free, 26 blocks free, 54996 bytes alloc, 3856 blocks alloc, 10Sep18 20:41:44.00,N,Open files 10Sep18 20:41:44.08,N, 0, 0x000435ee, main.c, 460 10Sep18 20:41:44.17,N,pin = 6, pin err = 0, comm = 2 10Sep18 20:41:44.27,N,ARS>> # do one third octave on same data (go up to 2500Hz) # fc = 10^(34/10) = 2.512 kHz (2.239kHz to 2.818kHz) # NOTE: last band may not be filled since 2.5kHz is our max freq oto bandmax=34 Entering Host Listen State... 10Sep18 20:41:44.70,H,ARS_OK 10Sep18 20:41:44.77,N,pin = 7, pin err = 0, comm = 2 10Sep18 20:41:44.87,N,ARS>> ARS_OK 10Sep18 20:41:44.98,N,divefinish 10Sep18 20:41:45.06,H,ARS_OK 10Sep18 20:41:45.18,D,Executing [rename C:\ARS.LOG c:\tmp.log]