% sg_calib_constants.m
% establishes glider calibration constants

% This fils is an example and MUST be changed apprpriately for your
% own glider.

id_str = '147';

mission_title ='CMORE upwelling';

calibcomm = 'SBE s/n 0074, calibration 24 Sep 2007';

t_g =  4.28399332e-03 ;
t_h =  6.28267679e-04 ;
t_i =  2.33110286e-05 ; 
t_j =  2.46290428e-06 ;

% Minimum and maximum frequencies (kHz) for reasonable
%  oceanographic values of temperature from SBE calibration
%  for C/T s/n 041

sbe_temp_freq_min = 3.214274; % kHz
sbe_temp_freq_max = 6.081845; % kHz

c_g = -9.83881046e+00 ;
c_h =  1.10142434e+00 ;
c_i = -1.63138993e-03 ;
c_j =  2.05652431e-04 ;

% Minimum and maximum frequencies (kHz) for reasonable
%  oceanographic values of conductivity SBE calibration
%  for C/T s/n 041

sbe_cond_freq_min = 2.98792; % kHz
sbe_cond_freq_max = 7.95840; % kHz

cpcor = -9.57e-08 ;
ctcor =  3.25e-06 ;

calibcomm_oxygen = '0130';
Soc = 2.1841e-4;
Foffset = -788.7324
o_a = -1.0893e-3;
o_b = 2.0615e-4;
o_c = -3.5779e-6;
o_e = 0.036;

mass = 52.633; % weight from trim sheet
volmax = 51779;

hd_a = 0.003836;
hd_b = 0.010078;
hd_c = 9.8541e-6;

rho0 = 1027.5;

pitch_min_cnts = 485;
pitch_max_cnts = 3757;
roll_min_cnts = 160;
roll_max_cnts = 3941;
vbd_min_cnts = 477;
vbd_max_cnts = 3951;
vbd_cnts_per_cc = -4.0767;


pitchbias = 0.;

pump_rate_intercept = 1.275;
pump_rate_slope = -0.00015;
pump_power_intercept = 17.4033;
pump_power_slope = 0.017824;
 
wlbb2f_chl_dark = 47;           % counts
wlbb2f_chl_scale = 0.0163;      % mirco_g/l/count
wlbb2f_700_dark = 41;           % counts
wlbb2f_700_scale = 2.749e-6;    % counts
wlbb2f_470_dark = 51;           % counts
wlbb2f_470_scale = 1.226e-5;    % counts

wlbbfl2_660_dark = 45;          % counts
wlbbfl2_660_scale = 3.756e-6;   % (m^{-1}sr^{-1})/counts
wlbbfl2_chl_dark = 39;          % counts
wlbbfl2_chl_scale = 0.0119;     % micro_g/l/count
wlbbfl2_cdom_dark = 56;         % count
wlbbfl2_cdom_scale = 0.0879;    % ppb/count

