:------ Optode Menu ------ 1 [direct ] Direct comm with optode (pour-thru mode, raw data) ('CTL-Q' to quit) 2 [selftest] Optode self-test 3 [getcfg ] Get optode on-board configuration 4 [init ] Initialize optode (one time setup) CR) Return to previous Enter selection (1-4,CR): 3 843.659,HOPTODE,D,device Optode on port 5 up (stat=0) 843.728,HOPTODE,N,Grabbing optode config data ... 847.244,HOPTODE,N,Protect 5013 21 0 847.328,HOPTODE,N,PhaseCoef 5013 21 1.540130E+00 1.093933E+00 0.00000 0E+00 0.000000E+00 847.464,HOPTODE,N,TempCoef 5013 21 2.431767E+01 -3.112080E-02 2.93847 1E-06 -4.220552E-09 847.596,HOPTODE,N,FoilNo 5013 21 1707 847.672,HOPTODE,N,C0Coef 5013 21 5.326502E+03 -1.921173E+02 4.14357 1E+00 -3.786947E-02 847.807,HOPTODE,N,C1Coef 5013 21 -2.920675E+02 9.719927E+00 -2.14294 6E-01 2.007775E-03 847.944,HOPTODE,N,C2Coef 5013 21 6.475949E+00 -1.980797E-01 4.49940 2E-03 -4.305303E-05 848.081,HOPTODE,N,C3Coef 5013 21 -6.692884E-02 1.880658E-03 -4.42347 9E-05 4.283825E-07 848.218,HOPTODE,N,C4Coef 5013 21 2.650423E-04 -6.831853E-06 1.67070 5E-07 -1.619889E-09 848.350,HOPTODE,N,Salinity 5013 21 0.000000E+00 848.430,HOPTODE,N,CalAirPhase 5013 21 3.117744E+01 848.510,HOPTODE,N,CalAirTemp 5013 21 9.907272E+00 848.590,HOPTODE,N,CalAirPressure 5013 21 1.018820E+03 848.679,HOPTODE,N,CalZeroPhase 5013 21 6.569309E+01 848.759,HOPTODE,N,CalZeroTemp 5013 21 2.055386E+01 848.838,HOPTODE,N,Interval 5013 21 1 848.911,HOPTODE,N,AnCoef 5013 21 0.000000E+00 1.000000E+00 849.006,HOPTODE,N,Output 5013 21 101 849.077,HOPTODE,N,SR10Delay 5013 21 -1 849.147,HOPTODE,N,SoftwareVersion 5013 21 3 849.227,HOPTODE,N,SoftwareBuild 5013 21 10 849.303,HOPTODE,N,done. 849.704,HOPTODE,D,device Optode on port 5 down ************************************************************** --Apple-Mail-18--161080537 Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes Content-Transfer-Encoding: 7bit That's correct Glenn. Steve, the item on the Optode hardware menu you're looking for is "Initialize the Optode". It will come up with a question re: time that has a default of 10000, but you should type in 40000 (leaves it in this process for 40 sec, not 10). Hopefully this will get it to work. - Fritz On Aug 13, 2008, at 2:37 PM, Glenn S Carter wrote: > Hi Steve, > > I'll answer best I can (Fritz feel free to jump in if I miss > anything). As I understand it, its not that the calibrations are > wrong but the way the sensor starts up and has its sampling interval > set that is incompatible with the glider code. > > The selftest capture file had HOPTODE,N, 5013 21 1, where > the last number needs to be 101 (not 1). > > From Geoff's email do the following > 1) > menu hw/optode/selftest > This should result in a file similar to this: > 201.085,SSURF,N,Executing commands in pdoscmds.bat > Executing 'menu hw/optode/selftest'... > 201.228,SUSR,N,Starting breakable loop, timeout in 60 seconds > 201.306,HOPTODE,N,Sample O2 Temp DPhase Errors > 202.459,HOPTODE,N, 0 0 1000 9969 0 > 203.873,HOPTODE,N, 1 0 1000 9978 0 > 205.026,HOPTODE,N, 2 0 1000 9979 0 > 206.180,HOPTODE,N, 3 0 1000 9981 0 > 207.333,HOPTODE,N, 4 0 1000 9982 0 > 208.487,HOPTODE,N, 5 0 1000 9981 0 > 209.640,HOPTODE,N, 6 0 1000 9981 0 > 210.792,HOPTODE,N, 7 0 1000 9981 0 > 211.945,HOPTODE,N, 8 0 1000 9980 0 > 213.099,HOPTODE,N, 9 0 1000 9982 0 > Succeeded in 11.97 secs > 213.268,SSURF,N,finished commands > 213.322,SSYS,N,Changing capture file > The 0 02 and 1000 Temp are the signs things are not configured > correctly. > > 2) > menu hw/optode/init timeout=40000 > This should result in a file similar to this: > 448.504,SSURF,N,Executing commands in pdoscmds.bat > Executing 'menu hw/optode/init timeout=40000'... > 448.662,HOPTODE,N,Initializing optode ...done. > Succeeded in 93.92 secs > > 3) > menu hw/optode/selftest > to test that the configuration work.x It should result in a file > similar to this: > 1036.516,SSURF,N,Executing commands in pdoscmds.bat > Executing 'menu hw/optode/selftest'... > 1036.660,SUSR,N,Starting breakable loop, timeout in 60 seconds > 1036.739,HOPTODE,N,Sample O2 Temp DPhase Errors > 1037.724,HOPTODE,N, 0 27783 3101 3308 0 > 1038.951,HOPTODE,N, 1 27787 3101 3308 0 > 1039.936,HOPTODE,N, 2 27788 3101 3308 0 > 1040.921,HOPTODE,N, 3 27792 3101 3307 0 > 1041.906,HOPTODE,N, 4 27788 3101 3308 0 > 1042.890,HOPTODE,N, 5 27786 3101 3308 0 > 1043.875,HOPTODE,N, 6 27787 3101 3308 0 > 1044.860,HOPTODE,N, 7 27785 3101 3308 0 > 1045.846,HOPTODE,N, 8 27793 3101 3307 0 > 1046.830,HOPTODE,N, 9 27787 3101 3308 0 > Succeeded in 10.27 secs > 1047.001,SSURF,N,finished commands > 1047.055,SSYS,N,Changing capture file > 277xx is a more reasonable looking 02. Temp is encoded as (degrees > C + 10) * 100 - so 69 is a reasonable temp for the lab. > > The instructions above were for doing it through pdoscmds.bat so > output is to a file, whereas you will get it to the screen. > > I'll be finished with the workshop class today at 5pm PDT (1400HST). > > Glenn