* Sea-Bird SBE 9 Data File:
* FileName = D:\hot-255\0052A001.hex
* Software Version Seasave V 7.20b
* Temperature SN = 1416
* Conductivity SN = 3162
* Number of Bytes Per Scan = 37
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Oct 03 2013 21:53:50
* NMEA Latitude = 22 42.08 N
* NMEA Longitude = 157 57.07 W
* NMEA UTC (Time) = Oct 03 2013 21:53:18
* Store Lat/Lon Data = Append to Every Scan
** Cruise: HOT-255
** Leg: 1
** Station:  52
** Cast:   1
** Latitude:   22 42.102 N
** Longitude:  157 57.135 W
** Sun Oct 03 21:53:25 2013,  Julian day = 275
** Comments:
# nquan = 11
# nvalues = 119365                                
# units = specified
# name 0 = scan: Scan Count
# name 1 = prDM: Pressure, Digiquartz [db]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = t190C: Temperature, 2 [ITS-90, deg C]
# name 4 = c0S/m: Conductivity [S/m]
# name 5 = c1S/m: Conductivity, 2 [S/m]
# name 6 = flS: Fluorescence, Seatech
# name 7 = bat1: Beam Attenuation, Chelsea/Seatech, 2 [1/m]
# name 8 = xmiss1: Beam Transmission, Chelsea/Seatech, 2 [%]
# name 9 = v7: Voltage 7
# name 10 = flag:  0.000e+00
# span 0 =          1,     119365                 
# span 1 =     -1.054,    200.344                 
# span 2 =    18.4730,    26.6204                 
# span 3 =    18.4751,    26.7745                 
# span 4 =  -0.797964,   5.507045                 
# span 5 =  -0.803747,   5.507265                 
# span 6 = 0.0000e+00, 1.0256e+00                 
# span 7 =    -0.1348,     6.0990                 
# span 8 =    21.7673,   103.4286                 
# span 9 =     1.0794,     4.8510                 
# span 10 = 0.0000e+00, 0.0000e+00                
# interval = seconds: 0.0416667
# start_time = Oct 03 2013 21:53:18 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>1416</SerialNumber>
#       <CalibrationDate> 130806</CalibrationDate>
#       <UseG_J>0</UseG_J>
#       <A>3.68120951e-003</A>
#       <B>6.01694936e-004</B>
#       <C>1.45645447e-005</C>
#       <D>1.76037955e-006</D>
#       <F0_Old>6233.343</F0_Old>
#       <G>0.00000000e+000</G>
#       <H>0.00000000e+000</H>
#       <I>0.00000000e+000</I>
#       <J>0.00000000e+000</J>
#       <F0>0.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3162</SerialNumber>
#       <CalibrationDate> 130424</CalibrationDate>
#       <UseG_J>0</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>9.09726165e-005</A>
#         <B>1.45437715e+000</B>
#         <C>-1.01617158e+001</C>
#         <D>-8.39580827e-005</D>
#         <M>3.9</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>0.00000000e+000</G>
#         <H>0.00000000e+000</H>
#         <I>0.00000000e+000</I>
#         <J>0.00000000e+000</J>
#         <CPcor>0.00000000e+000</CPcor>
#         <CTcor>0.0000e+000</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>1430</SerialNumber>
#       <CalibrationDate> 070525</CalibrationDate>
#       <C1>-4.859814e+004</C1>
#       <C2>-1.829787e-001</C2>
#       <C3>1.386580e-002</C3>
#       <D1>3.601400e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.992319e+001</T1>
#       <T2>-2.278556e-004</T2>
#       <T3>3.648560e-006</T3>
#       <T4>3.958860e-009</T4>
#       <Slope>1.00008000</Slope>
#       <Offset>-0.40400</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.288190e-002</AD590M>
#       <AD590B>-8.586070e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5519</SerialNumber>
#       <CalibrationDate> 130806</CalibrationDate>
#       <UseG_J>0</UseG_J>
#       <A>3.68121296e-003</A>
#       <B>5.90816769e-004</B>
#       <C>1.48852058e-005</C>
#       <D>1.53655316e-006</D>
#       <F0_Old>3004.227</F0_Old>
#       <G>0.00000000e+000</G>
#       <H>0.00000000e+000</H>
#       <I>0.00000000e+000</I>
#       <J>0.00000000e+000</J>
#       <F0>0.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2218</SerialNumber>
#       <CalibrationDate> 130821</CalibrationDate>
#       <UseG_J>0</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>3.33846252e-007</A>
#         <B>1.49482832e+000</B>
#         <C>-1.02690715e+001</C>
#         <D>-7.90774478e-005</D>
#         <M>6.5</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>0.00000000e+000</G>
#         <H>0.00000000e+000</H>
#         <I>0.00000000e+000</I>
#         <J>0.00000000e+000</J>
#         <CPcor>0.00000000e+000</CPcor>
#         <CTcor>0.0000e+000</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, Seatech/WET Labs FLF -->
#     <FluoroSeatechWetlabsFLF_Sensor SensorID="13" >
#       <SerialNumber>3095</SerialNumber>
#       <CalibrationDate> 090427</CalibrationDate>
#       <ScaleFactor>5.000000e+000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </FluoroSeatechWetlabsFLF_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>97</SerialNumber>
#       <CalibrationDate> 060525</CalibrationDate>
#       <M>27.1192</M>
#       <B>-8.3438</B>
#       <PathLength>0.000</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Oxygen Current, Beckman/YSI -->
#     <OxygenSensor SensorID="36" >
#       <SerialNumber>1601</SerialNumber>
#       <CalibrationDate> 130417</CalibrationDate>
#       <M>1.0000e-006</M>
#       <B>-4.9860e-007</B>
#       <Soc>0.4258</Soc>
#       <Boc>0.0000</Boc>
#       <Tcor>0.0015</Tcor>
#       <Pcor>1.35e-004</Pcor>
#       <Tau>2.0</Tau>
#       <Wt>0.00</Wt>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Oxygen Temperature, Beckman/YSI -->
#     <OxygenSensor SensorID="39" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <K>1.0000</K>
#       <C>0.0000</C>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Oxygen Current, Beckman/YSI, 2 -->
#     <OxygenSensor SensorID="36" >
#       <SerialNumber>43262</SerialNumber>
#       <CalibrationDate>130525</CalibrationDate>
#       <M>1.0000e-006</M>
#       <B>-5.7590e-007</B>
#       <Soc>0.3914</Soc>
#       <Boc>0.0000</Boc>
#       <Tcor>0.0010</Tcor>
#       <Pcor>1.35e-004</Pcor>
#       <Tau>2.0</Tau>
#       <Wt>0.00</Wt>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Oxygen Temperature, Beckman/YSI, 2 -->
#     <OxygenSensor SensorID="39" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <K>1.0000</K>
#       <C>0.0000</C>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Free -->
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Transmissometer, Chelsea/Seatech, 2 -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>1192</SerialNumber>
#       <CalibrationDate>130626</CalibrationDate>
#       <M>21.6512</M>
#       <B>-1.6022</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jan 22 2014 15:49:10, 7.23.1 [datcnv_vars = 10]
# datcnv_in = C:\Users\Lance\Work Documents\Data\HOT\CTD data\hot-255\0052a001.hex C:\Users\Lance\Work Documents\Data\HOT\CTD data\hot-255\0052a001.CON
# datcnv_skipover = 0
# file_type = binary
*END*